[GEDI] [PATCH-for-9.1 v2 2/3] migration: Remove RDMA protocol handling

Philippe Mathieu-Daudé philmd at linaro.org
Thu Mar 28 13:02:54 UTC 2024


The whole RDMA subsystem was deprecated in commit e9a54265f5
("hw/rdma: Deprecate the pvrdma device and the rdma subsystem")
released in v8.2.

Remove:
 - RDMA handling from migration
 - dependencies on libibumad, libibverbs and librdmacm

Keep the RAM_SAVE_FLAG_HOOK definition since it might appears
in old migration streams.

Cc: Peter Xu <peterx at redhat.com>
Cc: Li Zhijian <lizhijian at fujitsu.com>
Acked-by: Fabiano Rosas <farosas at suse.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd at linaro.org>
---
 MAINTAINERS                                   |    7 -
 docs/devel/migration/main.rst                 |    6 -
 docs/rdma.txt                                 |  420 --
 docs/system/loongarch/virt.rst                |    2 +-
 meson.build                                   |   23 -
 qapi/migration.json                           |   31 +-
 migration/migration-stats.h                   |    6 +-
 migration/migration.h                         |    9 -
 migration/options.h                           |    2 -
 migration/rdma.h                              |   69 -
 migration/migration-stats.c                   |    5 +-
 migration/migration.c                         |   31 -
 migration/options.c                           |   16 -
 migration/qemu-file.c                         |    1 -
 migration/ram.c                               |   86 +-
 migration/rdma.c                              | 4184 -----------------
 migration/savevm.c                            |    2 +-
 meson_options.txt                             |    2 -
 migration/meson.build                         |    1 -
 migration/trace-events                        |   68 +-
 qemu-options.hx                               |    3 -
 .../org.centos/stream/8/build-environment.yml |    1 -
 .../ci/org.centos/stream/8/x86_64/configure   |    2 -
 scripts/ci/setup/build-environment.yml        |    4 -
 scripts/coverity-scan/run-coverity-scan       |    2 +-
 scripts/meson-buildoptions.sh                 |    3 -
 tests/lcitool/projects/qemu.yml               |    3 -
 tests/migration/guestperf/engine.py           |    4 +-
 28 files changed, 14 insertions(+), 4979 deletions(-)
 delete mode 100644 docs/rdma.txt
 delete mode 100644 migration/rdma.h
 delete mode 100644 migration/rdma.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 91ab5235b8..05226cea0a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3426,13 +3426,6 @@ F: docs/devel/migration.rst
 F: qapi/migration.json
 F: tests/migration/
 F: util/userfaultfd.c
-X: migration/rdma*
-
-RDMA Migration
-R: Li Zhijian <lizhijian at fujitsu.com>
-R: Peter Xu <peterx at redhat.com>
-S: Odd Fixes
-F: migration/rdma*
 
 Migration dirty limit and dirty page rate
 M: Hyman Huang <yong.huang at smartx.com>
diff --git a/docs/devel/migration/main.rst b/docs/devel/migration/main.rst
index 54385a23e5..70278ce1e3 100644
--- a/docs/devel/migration/main.rst
+++ b/docs/devel/migration/main.rst
@@ -47,12 +47,6 @@ over any transport.
   QEMU interference. Note that QEMU does not flush cached file
   data/metadata at the end of migration.
 
-In addition, support is included for migration using RDMA, which
-transports the page data using ``RDMA``, where the hardware takes care of
-transporting the pages, and the load on the CPU is much lower.  While the
-internals of RDMA migration are a bit different, this isn't really visible
-outside the RAM migration code.
-
 All these migration protocols use the same infrastructure to
 save/restore state devices.  This infrastructure is shared with the
 savevm/loadvm functionality.
diff --git a/docs/rdma.txt b/docs/rdma.txt
deleted file mode 100644
index bd8dd799a9..0000000000
--- a/docs/rdma.txt
+++ /dev/null
@@ -1,420 +0,0 @@
-(RDMA: Remote Direct Memory Access)
-RDMA Live Migration Specification, Version # 1
-==============================================
-Wiki: https://wiki.qemu.org/Features/RDMALiveMigration
-Github: git at github.com:hinesmr/qemu.git, 'rdma' branch
-
-Copyright (C) 2013 Michael R. Hines <mrhines at us.ibm.com>
-
-An *exhaustive* paper (2010) shows additional performance details
-linked on the QEMU wiki above.
-
-Contents:
-=========
-* Introduction
-* Before running
-* Running
-* Performance
-* RDMA Migration Protocol Description
-* Versioning and Capabilities
-* QEMUFileRDMA Interface
-* Migration of VM's ram
-* Error handling
-* TODO
-
-Introduction:
-=============
-
-RDMA helps make your migration more deterministic under heavy load because
-of the significantly lower latency and higher throughput over TCP/IP. This is
-because the RDMA I/O architecture reduces the number of interrupts and
-data copies by bypassing the host networking stack. In particular, a TCP-based
-migration, under certain types of memory-bound workloads, may take a more
-unpredictable amount of time to complete the migration if the amount of
-memory tracked during each live migration iteration round cannot keep pace
-with the rate of dirty memory produced by the workload.
-
-RDMA currently comes in two flavors: both Ethernet based (RoCE, or RDMA
-over Converged Ethernet) as well as Infiniband-based. This implementation of
-migration using RDMA is capable of using both technologies because of
-the use of the OpenFabrics OFED software stack that abstracts out the
-programming model irrespective of the underlying hardware.
-
-Refer to openfabrics.org or your respective RDMA hardware vendor for
-an understanding on how to verify that you have the OFED software stack
-installed in your environment. You should be able to successfully link
-against the "librdmacm" and "libibverbs" libraries and development headers
-for a working build of QEMU to run successfully using RDMA Migration.
-
-BEFORE RUNNING:
-===============
-
-Use of RDMA during migration requires pinning and registering memory
-with the hardware. This means that memory must be physically resident
-before the hardware can transmit that memory to another machine.
-If this is not acceptable for your application or product, then the use
-of RDMA migration may in fact be harmful to co-located VMs or other
-software on the machine if there is not sufficient memory available to
-relocate the entire footprint of the virtual machine. If so, then the
-use of RDMA is discouraged and it is recommended to use standard TCP migration.
-
-Experimental: Next, decide if you want dynamic page registration.
-For example, if you have an 8GB RAM virtual machine, but only 1GB
-is in active use, then enabling this feature will cause all 8GB to
-be pinned and resident in memory. This feature mostly affects the
-bulk-phase round of the migration and can be enabled for extremely
-high-performance RDMA hardware using the following command:
-
-QEMU Monitor Command:
-$ migrate_set_capability rdma-pin-all on # disabled by default
-
-Performing this action will cause all 8GB to be pinned, so if that's
-not what you want, then please ignore this step altogether.
-
-On the other hand, this will also significantly speed up the bulk round
-of the migration, which can greatly reduce the "total" time of your migration.
-Example performance of this using an idle VM in the previous example
-can be found in the "Performance" section.
-
-Note: for very large virtual machines (hundreds of GBs), pinning all
-*all* of the memory of your virtual machine in the kernel is very expensive
-may extend the initial bulk iteration time by many seconds,
-and thus extending the total migration time. However, this will not
-affect the determinism or predictability of your migration you will
-still gain from the benefits of advanced pinning with RDMA.
-
-RUNNING:
-========
-
-First, set the migration speed to match your hardware's capabilities:
-
-QEMU Monitor Command:
-$ migrate_set_parameter max-bandwidth 40g # or whatever is the MAX of your RDMA device
-
-Next, on the destination machine, add the following to the QEMU command line:
-
-qemu ..... -incoming rdma:host:port
-
-Finally, perform the actual migration on the source machine:
-
-QEMU Monitor Command:
-$ migrate -d rdma:host:port
-
-PERFORMANCE
-===========
-
-Here is a brief summary of total migration time and downtime using RDMA:
-Using a 40gbps infiniband link performing a worst-case stress test,
-using an 8GB RAM virtual machine:
-
-Using the following command:
-$ apt-get install stress
-$ stress --vm-bytes 7500M --vm 1 --vm-keep
-
-1. Migration throughput: 26 gigabits/second.
-2. Downtime (stop time) varies between 15 and 100 milliseconds.
-
-EFFECTS of memory registration on bulk phase round:
-
-For example, in the same 8GB RAM example with all 8GB of memory in
-active use and the VM itself is completely idle using the same 40 gbps
-infiniband link:
-
-1. rdma-pin-all disabled total time: approximately 7.5 seconds @ 9.5 Gbps
-2. rdma-pin-all enabled total time: approximately 4 seconds @ 26 Gbps
-
-These numbers would of course scale up to whatever size virtual machine
-you have to migrate using RDMA.
-
-Enabling this feature does *not* have any measurable affect on
-migration *downtime*. This is because, without this feature, all of the
-memory will have already been registered already in advance during
-the bulk round and does not need to be re-registered during the successive
-iteration rounds.
-
-RDMA Protocol Description:
-==========================
-
-Migration with RDMA is separated into two parts:
-
-1. The transmission of the pages using RDMA
-2. Everything else (a control channel is introduced)
-
-"Everything else" is transmitted using a formal
-protocol now, consisting of infiniband SEND messages.
-
-An infiniband SEND message is the standard ibverbs
-message used by applications of infiniband hardware.
-The only difference between a SEND message and an RDMA
-message is that SEND messages cause notifications
-to be posted to the completion queue (CQ) on the
-infiniband receiver side, whereas RDMA messages (used
-for VM's ram) do not (to behave like an actual DMA).
-
-Messages in infiniband require two things:
-
-1. registration of the memory that will be transmitted
-2. (SEND only) work requests to be posted on both
-   sides of the network before the actual transmission
-   can occur.
-
-RDMA messages are much easier to deal with. Once the memory
-on the receiver side is registered and pinned, we're
-basically done. All that is required is for the sender
-side to start dumping bytes onto the link.
-
-(Memory is not released from pinning until the migration
-completes, given that RDMA migrations are very fast.)
-
-SEND messages require more coordination because the
-receiver must have reserved space (using a receive
-work request) on the receive queue (RQ) before QEMUFileRDMA
-can start using them to carry all the bytes as
-a control transport for migration of device state.
-
-To begin the migration, the initial connection setup is
-as follows (migration-rdma.c):
-
-1. Receiver and Sender are started (command line or libvirt):
-2. Both sides post two RQ work requests
-3. Receiver does listen()
-4. Sender does connect()
-5. Receiver accept()
-6. Check versioning and capabilities (described later)
-
-At this point, we define a control channel on top of SEND messages
-which is described by a formal protocol. Each SEND message has a
-header portion and a data portion (but together are transmitted
-as a single SEND message).
-
-Header:
-    * Length               (of the data portion, uint32, network byte order)
-    * Type                 (what command to perform, uint32, network byte order)
-    * Repeat               (Number of commands in data portion, same type only)
-
-The 'Repeat' field is here to support future multiple page registrations
-in a single message without any need to change the protocol itself
-so that the protocol is compatible against multiple versions of QEMU.
-Version #1 requires that all server implementations of the protocol must
-check this field and register all requests found in the array of commands located
-in the data portion and return an equal number of results in the response.
-The maximum number of repeats is hard-coded to 4096. This is a conservative
-limit based on the maximum size of a SEND message along with empirical
-observations on the maximum future benefit of simultaneous page registrations.
-
-The 'type' field has 12 different command values:
-     1. Unused
-     2. Error                      (sent to the source during bad things)
-     3. Ready                      (control-channel is available)
-     4. QEMU File                  (for sending non-live device state)
-     5. RAM Blocks request         (used right after connection setup)
-     6. RAM Blocks result          (used right after connection setup)
-     7. Compress page              (zap zero page and skip registration)
-     8. Register request           (dynamic chunk registration)
-     9. Register result            ('rkey' to be used by sender)
-    10. Register finished          (registration for current iteration finished)
-    11. Unregister request         (unpin previously registered memory)
-    12. Unregister finished        (confirmation that unpin completed)
-
-A single control message, as hinted above, can contain within the data
-portion an array of many commands of the same type. If there is more than
-one command, then the 'repeat' field will be greater than 1.
-
-After connection setup, message 5 & 6 are used to exchange ram block
-information and optionally pin all the memory if requested by the user.
-
-After ram block exchange is completed, we have two protocol-level
-functions, responsible for communicating control-channel commands
-using the above list of values:
-
-Logically:
-
-qemu_rdma_exchange_recv(header, expected command type)
-
-1. We transmit a READY command to let the sender know that
-   we are *ready* to receive some data bytes on the control channel.
-2. Before attempting to receive the expected command, we post another
-   RQ work request to replace the one we just used up.
-3. Block on a CQ event channel and wait for the SEND to arrive.
-4. When the send arrives, librdmacm will unblock us.
-5. Verify that the command-type and version received matches the one we expected.
-
-qemu_rdma_exchange_send(header, data, optional response header & data):
-
-1. Block on the CQ event channel waiting for a READY command
-   from the receiver to tell us that the receiver
-   is *ready* for us to transmit some new bytes.
-2. Optionally: if we are expecting a response from the command
-   (that we have not yet transmitted), let's post an RQ
-   work request to receive that data a few moments later.
-3. When the READY arrives, librdmacm will
-   unblock us and we immediately post a RQ work request
-   to replace the one we just used up.
-4. Now, we can actually post the work request to SEND
-   the requested command type of the header we were asked for.
-5. Optionally, if we are expecting a response (as before),
-   we block again and wait for that response using the additional
-   work request we previously posted. (This is used to carry
-   'Register result' commands #6 back to the sender which
-   hold the rkey need to perform RDMA. Note that the virtual address
-   corresponding to this rkey was already exchanged at the beginning
-   of the connection (described below).
-
-All of the remaining command types (not including 'ready')
-described above all use the aforementioned two functions to do the hard work:
-
-1. After connection setup, RAMBlock information is exchanged using
-   this protocol before the actual migration begins. This information includes
-   a description of each RAMBlock on the server side as well as the virtual addresses
-   and lengths of each RAMBlock. This is used by the client to determine the
-   start and stop locations of chunks and how to register them dynamically
-   before performing the RDMA operations.
-2. During runtime, once a 'chunk' becomes full of pages ready to
-   be sent with RDMA, the registration commands are used to ask the
-   other side to register the memory for this chunk and respond
-   with the result (rkey) of the registration.
-3. Also, the QEMUFile interfaces also call these functions (described below)
-   when transmitting non-live state, such as devices or to send
-   its own protocol information during the migration process.
-4. Finally, zero pages are only checked if a page has not yet been registered
-   using chunk registration (or not checked at all and unconditionally
-   written if chunk registration is disabled. This is accomplished using
-   the "Compress" command listed above. If the page *has* been registered
-   then we check the entire chunk for zero. Only if the entire chunk is
-   zero, then we send a compress command to zap the page on the other side.
-
-Versioning and Capabilities
-===========================
-Current version of the protocol is version #1.
-
-The same version applies to both for protocol traffic and capabilities
-negotiation. (i.e. There is only one version number that is referred to
-by all communication).
-
-librdmacm provides the user with a 'private data' area to be exchanged
-at connection-setup time before any infiniband traffic is generated.
-
-Header:
-    * Version (protocol version validated before send/recv occurs),
-                                               uint32, network byte order
-    * Flags   (bitwise OR of each capability),
-                                               uint32, network byte order
-
-There is no data portion of this header right now, so there is
-no length field. The maximum size of the 'private data' section
-is only 192 bytes per the Infiniband specification, so it's not
-very useful for data anyway. This structure needs to remain small.
-
-This private data area is a convenient place to check for protocol
-versioning because the user does not need to register memory to
-transmit a few bytes of version information.
-
-This is also a convenient place to negotiate capabilities
-(like dynamic page registration).
-
-If the version is invalid, we throw an error.
-
-If the version is new, we only negotiate the capabilities that the
-requested version is able to perform and ignore the rest.
-
-Currently there is only one capability in Version #1: dynamic page registration
-
-Finally: Negotiation happens with the Flags field: If the primary-VM
-sets a flag, but the destination does not support this capability, it
-will return a zero-bit for that flag and the primary-VM will understand
-that as not being an available capability and will thus disable that
-capability on the primary-VM side.
-
-QEMUFileRDMA Interface:
-=======================
-
-QEMUFileRDMA introduces a couple of new functions:
-
-1. qemu_rdma_get_buffer()               (QEMUFileOps rdma_read_ops)
-2. qemu_rdma_put_buffer()               (QEMUFileOps rdma_write_ops)
-
-These two functions are very short and simply use the protocol
-describe above to deliver bytes without changing the upper-level
-users of QEMUFile that depend on a bytestream abstraction.
-
-Finally, how do we handoff the actual bytes to get_buffer()?
-
-Again, because we're trying to "fake" a bytestream abstraction
-using an analogy not unlike individual UDP frames, we have
-to hold on to the bytes received from control-channel's SEND
-messages in memory.
-
-Each time we receive a complete "QEMU File" control-channel
-message, the bytes from SEND are copied into a small local holding area.
-
-Then, we return the number of bytes requested by get_buffer()
-and leave the remaining bytes in the holding area until get_buffer()
-comes around for another pass.
-
-If the buffer is empty, then we follow the same steps
-listed above and issue another "QEMU File" protocol command,
-asking for a new SEND message to re-fill the buffer.
-
-Migration of VM's ram:
-====================
-
-At the beginning of the migration, (migration-rdma.c),
-the sender and the receiver populate the list of RAMBlocks
-to be registered with each other into a structure.
-Then, using the aforementioned protocol, they exchange a
-description of these blocks with each other, to be used later
-during the iteration of main memory. This description includes
-a list of all the RAMBlocks, their offsets and lengths, virtual
-addresses and possibly includes pre-registered RDMA keys in case dynamic
-page registration was disabled on the server-side, otherwise not.
-
-Main memory is not migrated with the aforementioned protocol,
-but is instead migrated with normal RDMA Write operations.
-
-Pages are migrated in "chunks" (hard-coded to 1 Megabyte right now).
-Chunk size is not dynamic, but it could be in a future implementation.
-There's nothing to indicate that this is useful right now.
-
-When a chunk is full (or a flush() occurs), the memory backed by
-the chunk is registered with librdmacm is pinned in memory on
-both sides using the aforementioned protocol.
-After pinning, an RDMA Write is generated and transmitted
-for the entire chunk.
-
-Chunks are also transmitted in batches: This means that we
-do not request that the hardware signal the completion queue
-for the completion of *every* chunk. The current batch size
-is about 64 chunks (corresponding to 64 MB of memory).
-Only the last chunk in a batch must be signaled.
-This helps keep everything as asynchronous as possible
-and helps keep the hardware busy performing RDMA operations.
-
-Error-handling:
-===============
-
-Infiniband has what is called a "Reliable, Connected"
-link (one of 4 choices). This is the mode in which
-we use for RDMA migration.
-
-If a *single* message fails,
-the decision is to abort the migration entirely and
-cleanup all the RDMA descriptors and unregister all
-the memory.
-
-After cleanup, the Virtual Machine is returned to normal
-operation the same way that would happen if the TCP
-socket is broken during a non-RDMA based migration.
-
-TODO:
-=====
-1. Currently, 'ulimit -l' mlock() limits as well as cgroups swap limits
-   are not compatible with infiniband memory pinning and will result in
-   an aborted migration (but with the source VM left unaffected).
-2. Use of the recent /proc/<pid>/pagemap would likely speed up
-   the use of KSM and ballooning while using RDMA.
-3. Also, some form of balloon-device usage tracking would also
-   help alleviate some issues.
-4. Use LRU to provide more fine-grained direction of UNREGISTER
-   requests for unpinning memory in an overcommitted environment.
-5. Expose UNREGISTER support to the user by way of workload-specific
-   hints about application behavior.
diff --git a/docs/system/loongarch/virt.rst b/docs/system/loongarch/virt.rst
index 06d034b8ef..0a8e0766e4 100644
--- a/docs/system/loongarch/virt.rst
+++ b/docs/system/loongarch/virt.rst
@@ -39,7 +39,7 @@ can be accessed by following steps.
 
 .. code-block:: bash
 
-  ./configure --disable-rdma --prefix=/usr \
+  ./configure --prefix=/usr \
               --target-list="loongarch64-softmmu" \
               --disable-libiscsi --disable-libnfs --disable-libpmem \
               --disable-glusterfs --enable-libusb --enable-usb-redir \
diff --git a/meson.build b/meson.build
index d6af3cd53a..bd65abad13 100644
--- a/meson.build
+++ b/meson.build
@@ -1854,21 +1854,6 @@ if numa.found() and not cc.links('''
   endif
 endif
 
-rdma = not_found
-if not get_option('rdma').auto() or have_system
-  libumad = cc.find_library('ibumad', required: get_option('rdma'))
-  rdma_libs = [cc.find_library('rdmacm', has_headers: ['rdma/rdma_cma.h'],
-                               required: get_option('rdma')),
-               cc.find_library('ibverbs', required: get_option('rdma')),
-               libumad]
-  rdma = declare_dependency(dependencies: rdma_libs)
-  foreach lib: rdma_libs
-    if not lib.found()
-      rdma = not_found
-    endif
-  endforeach
-endif
-
 cacard = not_found
 if not get_option('smartcard').auto() or have_system
   cacard = dependency('libcacard', required: get_option('smartcard'),
@@ -2246,7 +2231,6 @@ endif
 config_host_data.set('CONFIG_OPENGL', opengl.found())
 config_host_data.set('CONFIG_PLUGIN', get_option('plugins'))
 config_host_data.set('CONFIG_RBD', rbd.found())
-config_host_data.set('CONFIG_RDMA', rdma.found())
 config_host_data.set('CONFIG_RELOCATABLE', get_option('relocatable'))
 config_host_data.set('CONFIG_SAFESTACK', get_option('safe_stack'))
 config_host_data.set('CONFIG_SDL', sdl.found())
@@ -2399,12 +2383,6 @@ if rbd.found()
                                        dependencies: rbd,
                                        prefix: '#include <rbd/librbd.h>'))
 endif
-if rdma.found()
-  config_host_data.set('HAVE_IBV_ADVISE_MR',
-                       cc.has_function('ibv_advise_mr',
-                                       dependencies: rdma,
-                                       prefix: '#include <infiniband/verbs.h>'))
-endif
 
 have_asan_fiber = false
 if get_option('sanitizers') and \
@@ -4398,7 +4376,6 @@ summary_info += {'Multipath support': mpathpersist}
 summary_info += {'Linux AIO support': libaio}
 summary_info += {'Linux io_uring support': linux_io_uring}
 summary_info += {'ATTR/XATTR support': libattr}
-summary_info += {'RDMA support':      rdma}
 summary_info += {'fdt support':       fdt_opt == 'disabled' ? false : fdt_opt}
 summary_info += {'libcap-ng support': libcap_ng}
 summary_info += {'bpf support':       libbpf}
diff --git a/qapi/migration.json b/qapi/migration.json
index 8c65b90328..9a56d403be 100644
--- a/qapi/migration.json
+++ b/qapi/migration.json
@@ -221,8 +221,8 @@
 #
 # @setup-time: amount of setup time in milliseconds *before* the
 #     iterations begin but *after* the QMP command is issued.  This is
-#     designed to provide an accounting of any activities (such as
-#     RDMA pinning) which may be expensive, but do not actually occur
+#     designed to provide an accounting of any activities which may be
+#     expensive, but do not actually occur
 #     during the iterative migration rounds themselves.  (since 1.6)
 #
 # @cpu-throttle-percentage: percentage of time guest cpus are being
@@ -430,10 +430,6 @@
 #     for certain work loads, by sending compressed difference of the
 #     pages
 #
-# @rdma-pin-all: Controls whether or not the entire VM memory
-#     footprint is mlock()'d on demand or all at once.  Refer to
-#     docs/rdma.txt for usage.  Disabled by default.  (since 2.0)
-#
 # @zero-blocks: During storage migration encode blocks of zeroes
 #     efficiently.  This essentially saves 1MB of zeroes per block on
 #     the wire.  Enabling requires source and target VM to support
@@ -547,7 +543,7 @@
 # Since: 1.2
 ##
 { 'enum': 'MigrationCapability',
-  'data': ['xbzrle', 'rdma-pin-all', 'auto-converge', 'zero-blocks',
+  'data': ['xbzrle', 'auto-converge', 'zero-blocks',
            { 'name': 'compress', 'features': [ 'deprecated' ] },
            'events', 'postcopy-ram',
            { 'name': 'x-colo', 'features': [ 'unstable' ] },
@@ -606,7 +602,6 @@
 #     -> { "execute": "query-migrate-capabilities" }
 #     <- { "return": [
 #           {"state": false, "capability": "xbzrle"},
-#           {"state": false, "capability": "rdma-pin-all"},
 #           {"state": false, "capability": "auto-converge"},
 #           {"state": false, "capability": "zero-blocks"},
 #           {"state": false, "capability": "compress"},
@@ -1654,14 +1649,12 @@
 #
 # @exec: Direct the migration stream to another process.
 #
-# @rdma: Migrate via RDMA.
-#
 # @file: Direct the migration stream to a file.
 #
 # Since: 8.2
 ##
 { 'enum': 'MigrationAddressType',
-  'data': [ 'socket', 'exec', 'rdma', 'file' ] }
+  'data': [ 'socket', 'exec', 'file' ] }
 
 ##
 # @FileMigrationArgs:
@@ -1701,7 +1694,6 @@
   'data': {
     'socket': 'SocketAddress',
     'exec': 'MigrationExecCommand',
-    'rdma': 'InetSocketAddress',
     'file': 'FileMigrationArgs' } }
 
 ##
@@ -1804,14 +1796,6 @@
 #     -> { "execute": "migrate",
 #          "arguments": {
 #              "channels": [ { "channel-type": "main",
-#                              "addr": { "transport": "rdma",
-#                                        "host": "10.12.34.9",
-#                                        "port": "1050" } } ] } }
-#     <- { "return": {} }
-#
-#     -> { "execute": "migrate",
-#          "arguments": {
-#              "channels": [ { "channel-type": "main",
 #                              "addr": { "transport": "file",
 #                                        "filename": "/tmp/migfile",
 #                                        "offset": "0x1000" } } ] } }
@@ -1879,13 +1863,6 @@
 #                                                  "/some/sock" ] } } ] } }
 #     <- { "return": {} }
 #
-#     -> { "execute": "migrate-incoming",
-#          "arguments": {
-#              "channels": [ { "channel-type": "main",
-#                              "addr": { "transport": "rdma",
-#                                        "host": "10.12.34.9",
-#                                        "port": "1050" } } ] } }
-#     <- { "return": {} }
 ##
 { 'command': 'migrate-incoming',
              'data': {'*uri': 'str',
diff --git a/migration/migration-stats.h b/migration/migration-stats.h
index 05290ade76..817c53559a 100644
--- a/migration/migration-stats.h
+++ b/migration/migration-stats.h
@@ -93,10 +93,6 @@ typedef struct {
      * Maximum amount of data we can send in a cycle.
      */
     Stat64 rate_limit_max;
-    /*
-     * Number of bytes sent through RDMA.
-     */
-    Stat64 rdma_bytes;
     /*
      * Number of pages transferred that were full of zeros.
      */
@@ -133,7 +129,7 @@ void migration_rate_set(uint64_t new_rate);
  *
  * Returns how many bytes have we transferred since the beginning of
  * the migration.  It accounts for bytes sent through any migration
- * channel, multifd, qemu_file, rdma, ....
+ * channel, multifd, qemu_file, ....
  */
 uint64_t migration_transferred_bytes(void);
 #endif
diff --git a/migration/migration.h b/migration/migration.h
index 8045e39c26..d097828580 100644
--- a/migration/migration.h
+++ b/migration/migration.h
@@ -162,13 +162,6 @@ struct MigrationIncomingState {
 
     int state;
 
-    /*
-     * The incoming migration coroutine, non-NULL during qemu_loadvm_state().
-     * Used to wake the migration incoming coroutine from rdma code. How much is
-     * it safe - it's a question.
-     */
-    Coroutine *loadvm_co;
-
     /* The coroutine we should enter (back) after failover */
     Coroutine *colo_incoming_co;
     QemuSemaphore colo_incoming_sem;
@@ -463,8 +456,6 @@ struct MigrationState {
      * switchover has been received.
      */
     bool switchover_acked;
-    /* Is this a rdma migration */
-    bool rdma_migration;
 };
 
 void migrate_set_state(int *state, int old_state, int new_state);
diff --git a/migration/options.h b/migration/options.h
index ab8199e207..c00213973e 100644
--- a/migration/options.h
+++ b/migration/options.h
@@ -37,7 +37,6 @@ bool migrate_multifd(void);
 bool migrate_pause_before_switchover(void);
 bool migrate_postcopy_blocktime(void);
 bool migrate_postcopy_preempt(void);
-bool migrate_rdma_pin_all(void);
 bool migrate_release_ram(void);
 bool migrate_return_path(void);
 bool migrate_validate_uuid(void);
@@ -54,7 +53,6 @@ bool migrate_zero_copy_send(void);
 
 bool migrate_multifd_flush_after_each_section(void);
 bool migrate_postcopy(void);
-bool migrate_rdma(void);
 bool migrate_tls(void);
 
 /* capabilities helpers */
diff --git a/migration/rdma.h b/migration/rdma.h
deleted file mode 100644
index a8d27f33b8..0000000000
--- a/migration/rdma.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * RDMA protocol and interfaces
- *
- * Copyright IBM, Corp. 2010-2013
- * Copyright Red Hat, Inc. 2015-2016
- *
- * Authors:
- *  Michael R. Hines <mrhines at us.ibm.com>
- *  Jiuxing Liu <jl at us.ibm.com>
- *  Daniel P. Berrange <berrange at redhat.com>
- *
- * This work is licensed under the terms of the GNU GPL, version 2 or
- * later.  See the COPYING file in the top-level directory.
- *
- */
-
-#include "qemu/sockets.h"
-
-#ifndef QEMU_MIGRATION_RDMA_H
-#define QEMU_MIGRATION_RDMA_H
-
-#include "exec/memory.h"
-
-void rdma_start_outgoing_migration(void *opaque, InetSocketAddress *host_port,
-                                   Error **errp);
-
-void rdma_start_incoming_migration(InetSocketAddress *host_port, Error **errp);
-
-/*
- * Constants used by rdma return codes
- */
-#define RAM_CONTROL_SETUP     0
-#define RAM_CONTROL_ROUND     1
-#define RAM_CONTROL_FINISH    3
-
-/*
- * Whenever this is found in the data stream, the flags
- * will be passed to rdma functions in the incoming-migration
- * side.
- */
-#define RAM_SAVE_FLAG_HOOK     0x80
-
-#define RAM_SAVE_CONTROL_NOT_SUPP -1000
-#define RAM_SAVE_CONTROL_DELAYED  -2000
-
-#ifdef CONFIG_RDMA
-int rdma_registration_handle(QEMUFile *f);
-int rdma_registration_start(QEMUFile *f, uint64_t flags);
-int rdma_registration_stop(QEMUFile *f, uint64_t flags);
-int rdma_block_notification_handle(QEMUFile *f, const char *name);
-int rdma_control_save_page(QEMUFile *f, ram_addr_t block_offset,
-                           ram_addr_t offset, size_t size);
-#else
-static inline
-int rdma_registration_handle(QEMUFile *f) { return 0; }
-static inline
-int rdma_registration_start(QEMUFile *f, uint64_t flags) { return 0; }
-static inline
-int rdma_registration_stop(QEMUFile *f, uint64_t flags) { return 0; }
-static inline
-int rdma_block_notification_handle(QEMUFile *f, const char *name) { return 0; }
-static inline
-int rdma_control_save_page(QEMUFile *f, ram_addr_t block_offset,
-                           ram_addr_t offset, size_t size)
-{
-    return RAM_SAVE_CONTROL_NOT_SUPP;
-}
-#endif
-#endif
diff --git a/migration/migration-stats.c b/migration/migration-stats.c
index f690b98a03..9bc8d7018f 100644
--- a/migration/migration-stats.c
+++ b/migration/migration-stats.c
@@ -62,9 +62,8 @@ void migration_rate_reset(void)
 uint64_t migration_transferred_bytes(void)
 {
     uint64_t multifd = stat64_get(&mig_stats.multifd_bytes);
-    uint64_t rdma = stat64_get(&mig_stats.rdma_bytes);
     uint64_t qemu_file = stat64_get(&mig_stats.qemu_file_transferred);
 
-    trace_migration_transferred_bytes(qemu_file, multifd, rdma);
-    return qemu_file + multifd + rdma;
+    trace_migration_transferred_bytes(qemu_file, multifd);
+    return qemu_file + multifd;
 }
diff --git a/migration/migration.c b/migration/migration.c
index 9fe8fd2afd..8e17914c8b 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -25,7 +25,6 @@
 #include "sysemu/runstate.h"
 #include "sysemu/sysemu.h"
 #include "sysemu/cpu-throttle.h"
-#include "rdma.h"
 #include "ram.h"
 #include "ram-compress.h"
 #include "migration/global_state.h"
@@ -545,7 +544,6 @@ bool migrate_uri_parse(const char *uri, MigrationChannel **channel,
 {
     g_autoptr(MigrationChannel) val = g_new0(MigrationChannel, 1);
     g_autoptr(MigrationAddress) addr = g_new0(MigrationAddress, 1);
-    InetSocketAddress *isock = &addr->u.rdma;
     strList **tail = &addr->u.exec.args;
 
     if (strstart(uri, "exec:", NULL)) {
@@ -558,12 +556,6 @@ bool migrate_uri_parse(const char *uri, MigrationChannel **channel,
         QAPI_LIST_APPEND(tail, g_strdup("-c"));
 #endif
         QAPI_LIST_APPEND(tail, g_strdup(uri + strlen("exec:")));
-    } else if (strstart(uri, "rdma:", NULL)) {
-        if (inet_parse(isock, uri + strlen("rdma:"), errp)) {
-            qapi_free_InetSocketAddress(isock);
-            return false;
-        }
-        addr->transport = MIGRATION_ADDRESS_TYPE_RDMA;
     } else if (strstart(uri, "tcp:", NULL) ||
                 strstart(uri, "unix:", NULL) ||
                 strstart(uri, "vsock:", NULL) ||
@@ -645,22 +637,6 @@ static void qemu_start_incoming_migration(const char *uri, bool has_channels,
         } else if (saddr->type == SOCKET_ADDRESS_TYPE_FD) {
             fd_start_incoming_migration(saddr->u.fd.str, errp);
         }
-#ifdef CONFIG_RDMA
-    } else if (addr->transport == MIGRATION_ADDRESS_TYPE_RDMA) {
-        if (migrate_compress()) {
-            error_setg(errp, "RDMA and compression can't be used together");
-            return;
-        }
-        if (migrate_xbzrle()) {
-            error_setg(errp, "RDMA and XBZRLE can't be used together");
-            return;
-        }
-        if (migrate_multifd()) {
-            error_setg(errp, "RDMA and multifd can't be used together");
-            return;
-        }
-        rdma_start_incoming_migration(&addr->u.rdma, errp);
-#endif
     } else if (addr->transport == MIGRATION_ADDRESS_TYPE_EXEC) {
         exec_start_incoming_migration(addr->u.exec.args, errp);
     } else if (addr->transport == MIGRATION_ADDRESS_TYPE_FILE) {
@@ -751,9 +727,7 @@ process_incoming_migration_co(void *opaque)
     migrate_set_state(&mis->state, MIGRATION_STATUS_SETUP,
                       MIGRATION_STATUS_ACTIVE);
 
-    mis->loadvm_co = qemu_coroutine_self();
     ret = qemu_loadvm_state(mis->from_src_file);
-    mis->loadvm_co = NULL;
 
     trace_vmstate_downtime_checkpoint("dst-precopy-loadvm-completed");
 
@@ -1679,7 +1653,6 @@ int migrate_init(MigrationState *s, Error **errp)
     s->iteration_initial_bytes = 0;
     s->threshold_size = 0;
     s->switchover_acked = false;
-    s->rdma_migration = false;
     /*
      * set mig_stats memory to zero for a new migration
      */
@@ -2100,10 +2073,6 @@ void qmp_migrate(const char *uri, bool has_channels,
         } else if (saddr->type == SOCKET_ADDRESS_TYPE_FD) {
             fd_start_outgoing_migration(s, saddr->u.fd.str, &local_err);
         }
-#ifdef CONFIG_RDMA
-    } else if (addr->transport == MIGRATION_ADDRESS_TYPE_RDMA) {
-        rdma_start_outgoing_migration(s, &addr->u.rdma, &local_err);
-#endif
     } else if (addr->transport == MIGRATION_ADDRESS_TYPE_EXEC) {
         exec_start_outgoing_migration(s, addr->u.exec.args, &local_err);
     } else if (addr->transport == MIGRATION_ADDRESS_TYPE_FILE) {
diff --git a/migration/options.c b/migration/options.c
index bfd7753b69..02fc0b9ae8 100644
--- a/migration/options.c
+++ b/migration/options.c
@@ -185,7 +185,6 @@ Property migration_properties[] = {
 
     /* Migration capabilities */
     DEFINE_PROP_MIG_CAP("x-xbzrle", MIGRATION_CAPABILITY_XBZRLE),
-    DEFINE_PROP_MIG_CAP("x-rdma-pin-all", MIGRATION_CAPABILITY_RDMA_PIN_ALL),
     DEFINE_PROP_MIG_CAP("x-auto-converge", MIGRATION_CAPABILITY_AUTO_CONVERGE),
     DEFINE_PROP_MIG_CAP("x-zero-blocks", MIGRATION_CAPABILITY_ZERO_BLOCKS),
     DEFINE_PROP_MIG_CAP("x-compress", MIGRATION_CAPABILITY_COMPRESS),
@@ -323,13 +322,6 @@ bool migrate_postcopy_ram(void)
     return s->capabilities[MIGRATION_CAPABILITY_POSTCOPY_RAM];
 }
 
-bool migrate_rdma_pin_all(void)
-{
-    MigrationState *s = migrate_get_current();
-
-    return s->capabilities[MIGRATION_CAPABILITY_RDMA_PIN_ALL];
-}
-
 bool migrate_release_ram(void)
 {
     MigrationState *s = migrate_get_current();
@@ -393,13 +385,6 @@ bool migrate_postcopy(void)
     return migrate_postcopy_ram() || migrate_dirty_bitmaps();
 }
 
-bool migrate_rdma(void)
-{
-    MigrationState *s = migrate_get_current();
-
-    return s->rdma_migration;
-}
-
 bool migrate_tls(void)
 {
     MigrationState *s = migrate_get_current();
@@ -458,7 +443,6 @@ INITIALIZE_MIGRATE_CAPS_SET(check_caps_background_snapshot,
     MIGRATION_CAPABILITY_PAUSE_BEFORE_SWITCHOVER,
     MIGRATION_CAPABILITY_AUTO_CONVERGE,
     MIGRATION_CAPABILITY_RELEASE_RAM,
-    MIGRATION_CAPABILITY_RDMA_PIN_ALL,
     MIGRATION_CAPABILITY_COMPRESS,
     MIGRATION_CAPABILITY_XBZRLE,
     MIGRATION_CAPABILITY_X_COLO,
diff --git a/migration/qemu-file.c b/migration/qemu-file.c
index a10882d47f..ad2efb332e 100644
--- a/migration/qemu-file.c
+++ b/migration/qemu-file.c
@@ -32,7 +32,6 @@
 #include "trace.h"
 #include "options.h"
 #include "qapi/error.h"
-#include "rdma.h"
 #include "io/channel-file.h"
 
 #define IO_BUF_SIZE 32768
diff --git a/migration/ram.c b/migration/ram.c
index 8deb84984f..c81c8a7cff 100644
--- a/migration/ram.c
+++ b/migration/ram.c
@@ -59,7 +59,6 @@
 #include "qemu/iov.h"
 #include "multifd.h"
 #include "sysemu/runstate.h"
-#include "rdma.h"
 #include "options.h"
 #include "sysemu/dirtylimit.h"
 #include "sysemu/kvm.h"
@@ -89,7 +88,7 @@
 #define RAM_SAVE_FLAG_EOS      0x10
 #define RAM_SAVE_FLAG_CONTINUE 0x20
 #define RAM_SAVE_FLAG_XBZRLE   0x40
-/* 0x80 is reserved in rdma.h for RAM_SAVE_FLAG_HOOK */
+#define RAM_SAVE_FLAG_HOOK     0x80 /* was reserved by RDMA */
 #define RAM_SAVE_FLAG_COMPRESS_PAGE    0x100
 #define RAM_SAVE_FLAG_MULTIFD_FLUSH    0x200
 /* We can't use any flag that is bigger than 0x200 */
@@ -1175,32 +1174,6 @@ static int save_zero_page(RAMState *rs, PageSearchStatus *pss,
     return len;
 }
 
-/*
- * @pages: the number of pages written by the control path,
- *        < 0 - error
- *        > 0 - number of pages written
- *
- * Return true if the pages has been saved, otherwise false is returned.
- */
-static bool control_save_page(PageSearchStatus *pss,
-                              ram_addr_t offset, int *pages)
-{
-    int ret;
-
-    ret = rdma_control_save_page(pss->pss_channel, pss->block->offset, offset,
-                                 TARGET_PAGE_SIZE);
-    if (ret == RAM_SAVE_CONTROL_NOT_SUPP) {
-        return false;
-    }
-
-    if (ret == RAM_SAVE_CONTROL_DELAYED) {
-        *pages = 1;
-        return true;
-    }
-    *pages = ret;
-    return true;
-}
-
 /*
  * directly send the page to the stream
  *
@@ -2080,11 +2053,6 @@ static bool save_compress_page(RAMState *rs, PageSearchStatus *pss,
 static int ram_save_target_page_legacy(RAMState *rs, PageSearchStatus *pss)
 {
     ram_addr_t offset = ((ram_addr_t)pss->page) << TARGET_PAGE_BITS;
-    int res;
-
-    if (control_save_page(pss, offset, &res)) {
-        return res;
-    }
 
     if (save_compress_page(rs, pss, offset)) {
         return 1;
@@ -3114,18 +3082,6 @@ static int ram_save_setup(QEMUFile *f, void *opaque)
         }
     }
 
-    ret = rdma_registration_start(f, RAM_CONTROL_SETUP);
-    if (ret < 0) {
-        qemu_file_set_error(f, ret);
-        return ret;
-    }
-
-    ret = rdma_registration_stop(f, RAM_CONTROL_SETUP);
-    if (ret < 0) {
-        qemu_file_set_error(f, ret);
-        return ret;
-    }
-
     migration_ops = g_malloc0(sizeof(MigrationOps));
 
     if (migrate_multifd()) {
@@ -3221,12 +3177,6 @@ static int ram_save_iterate(QEMUFile *f, void *opaque)
             /* Read version before ram_list.blocks */
             smp_rmb();
 
-            ret = rdma_registration_start(f, RAM_CONTROL_ROUND);
-            if (ret < 0) {
-                qemu_file_set_error(f, ret);
-                goto out;
-            }
-
             t0 = qemu_clock_get_ns(QEMU_CLOCK_REALTIME);
             i = 0;
             while ((ret = migration_rate_exceeded(f)) == 0 ||
@@ -3278,15 +3228,6 @@ static int ram_save_iterate(QEMUFile *f, void *opaque)
         }
     }
 
-    /*
-     * Must occur before EOS (or any QEMUFile operation)
-     * because of RDMA protocol.
-     */
-    ret = rdma_registration_stop(f, RAM_CONTROL_ROUND);
-    if (ret < 0) {
-        qemu_file_set_error(f, ret);
-    }
-
 out:
     if (ret >= 0
         && migration_is_setup_or_active()) {
@@ -3332,12 +3273,6 @@ static int ram_save_complete(QEMUFile *f, void *opaque)
             migration_bitmap_sync_precopy(rs, true);
         }
 
-        ret = rdma_registration_start(f, RAM_CONTROL_FINISH);
-        if (ret < 0) {
-            qemu_file_set_error(f, ret);
-            return ret;
-        }
-
         /* try transferring iterative blocks of memory */
 
         /* flush all remaining blocks regardless of rate limiting */
@@ -3358,12 +3293,6 @@ static int ram_save_complete(QEMUFile *f, void *opaque)
         qemu_mutex_unlock(&rs->bitmap_mutex);
 
         compress_flush_data();
-
-        ret = rdma_registration_stop(f, RAM_CONTROL_FINISH);
-        if (ret < 0) {
-            qemu_file_set_error(f, ret);
-            return ret;
-        }
     }
 
     ret = multifd_send_sync_main();
@@ -3576,8 +3505,7 @@ static inline void *colo_cache_from_block_offset(RAMBlock *block,
 /**
  * ram_handle_zero: handle the zero page case
  *
- * If a page (or a whole RDMA chunk) has been
- * determined to be zero, then zap it.
+ * If a page has been determined to be zero, then zap it.
  *
  * @host: host address for the zero page
  * @ch: what the page is filled from.  We only support zero
@@ -4161,10 +4089,6 @@ static int parse_ramblock(QEMUFile *f, RAMBlock *block, ram_addr_t length)
             return -EINVAL;
         }
     }
-    ret = rdma_block_notification_handle(f, block->idstr);
-    if (ret < 0) {
-        qemu_file_set_error(f, ret);
-    }
 
     return ret;
 }
@@ -4363,12 +4287,6 @@ static int ram_load_precopy(QEMUFile *f)
                 multifd_recv_sync_main();
             }
             break;
-        case RAM_SAVE_FLAG_HOOK:
-            ret = rdma_registration_handle(f);
-            if (ret < 0) {
-                qemu_file_set_error(f, ret);
-            }
-            break;
         default:
             error_report("Unknown combination of migration flags: 0x%x", flags);
             ret = -EINVAL;
diff --git a/migration/rdma.c b/migration/rdma.c
deleted file mode 100644
index 855753c671..0000000000
--- a/migration/rdma.c
+++ /dev/null
@@ -1,4184 +0,0 @@
-/*
- * RDMA protocol and interfaces
- *
- * Copyright IBM, Corp. 2010-2013
- * Copyright Red Hat, Inc. 2015-2016
- *
- * Authors:
- *  Michael R. Hines <mrhines at us.ibm.com>
- *  Jiuxing Liu <jl at us.ibm.com>
- *  Daniel P. Berrange <berrange at redhat.com>
- *
- * This work is licensed under the terms of the GNU GPL, version 2 or
- * later.  See the COPYING file in the top-level directory.
- *
- */
-
-#include "qemu/osdep.h"
-#include "qapi/error.h"
-#include "qemu/cutils.h"
-#include "exec/target_page.h"
-#include "rdma.h"
-#include "migration.h"
-#include "migration-stats.h"
-#include "qemu-file.h"
-#include "ram.h"
-#include "qemu/error-report.h"
-#include "qemu/main-loop.h"
-#include "qemu/module.h"
-#include "qemu/rcu.h"
-#include "qemu/sockets.h"
-#include "qemu/bitmap.h"
-#include "qemu/coroutine.h"
-#include "exec/memory.h"
-#include <sys/socket.h>
-#include <netdb.h>
-#include <arpa/inet.h>
-#include <rdma/rdma_cma.h>
-#include "trace.h"
-#include "qom/object.h"
-#include "options.h"
-#include <poll.h>
-
-#define RDMA_RESOLVE_TIMEOUT_MS 10000
-
-/* Do not merge data if larger than this. */
-#define RDMA_MERGE_MAX (2 * 1024 * 1024)
-#define RDMA_SIGNALED_SEND_MAX (RDMA_MERGE_MAX / 4096)
-
-#define RDMA_REG_CHUNK_SHIFT 20 /* 1 MB */
-
-/*
- * This is only for non-live state being migrated.
- * Instead of RDMA_WRITE messages, we use RDMA_SEND
- * messages for that state, which requires a different
- * delivery design than main memory.
- */
-#define RDMA_SEND_INCREMENT 32768
-
-/*
- * Maximum size infiniband SEND message
- */
-#define RDMA_CONTROL_MAX_BUFFER (512 * 1024)
-#define RDMA_CONTROL_MAX_COMMANDS_PER_MESSAGE 4096
-
-#define RDMA_CONTROL_VERSION_CURRENT 1
-/*
- * Capabilities for negotiation.
- */
-#define RDMA_CAPABILITY_PIN_ALL 0x01
-
-/*
- * Add the other flags above to this list of known capabilities
- * as they are introduced.
- */
-static uint32_t known_capabilities = RDMA_CAPABILITY_PIN_ALL;
-
-/*
- * A work request ID is 64-bits and we split up these bits
- * into 3 parts:
- *
- * bits 0-15 : type of control message, 2^16
- * bits 16-29: ram block index, 2^14
- * bits 30-63: ram block chunk number, 2^34
- *
- * The last two bit ranges are only used for RDMA writes,
- * in order to track their completion and potentially
- * also track unregistration status of the message.
- */
-#define RDMA_WRID_TYPE_SHIFT  0UL
-#define RDMA_WRID_BLOCK_SHIFT 16UL
-#define RDMA_WRID_CHUNK_SHIFT 30UL
-
-#define RDMA_WRID_TYPE_MASK \
-    ((1UL << RDMA_WRID_BLOCK_SHIFT) - 1UL)
-
-#define RDMA_WRID_BLOCK_MASK \
-    (~RDMA_WRID_TYPE_MASK & ((1UL << RDMA_WRID_CHUNK_SHIFT) - 1UL))
-
-#define RDMA_WRID_CHUNK_MASK (~RDMA_WRID_BLOCK_MASK & ~RDMA_WRID_TYPE_MASK)
-
-/*
- * RDMA migration protocol:
- * 1. RDMA Writes (data messages, i.e. RAM)
- * 2. IB Send/Recv (control channel messages)
- */
-enum {
-    RDMA_WRID_NONE = 0,
-    RDMA_WRID_RDMA_WRITE = 1,
-    RDMA_WRID_SEND_CONTROL = 2000,
-    RDMA_WRID_RECV_CONTROL = 4000,
-};
-
-/*
- * Work request IDs for IB SEND messages only (not RDMA writes).
- * This is used by the migration protocol to transmit
- * control messages (such as device state and registration commands)
- *
- * We could use more WRs, but we have enough for now.
- */
-enum {
-    RDMA_WRID_READY = 0,
-    RDMA_WRID_DATA,
-    RDMA_WRID_CONTROL,
-    RDMA_WRID_MAX,
-};
-
-/*
- * SEND/RECV IB Control Messages.
- */
-enum {
-    RDMA_CONTROL_NONE = 0,
-    RDMA_CONTROL_ERROR,
-    RDMA_CONTROL_READY,               /* ready to receive */
-    RDMA_CONTROL_QEMU_FILE,           /* QEMUFile-transmitted bytes */
-    RDMA_CONTROL_RAM_BLOCKS_REQUEST,  /* RAMBlock synchronization */
-    RDMA_CONTROL_RAM_BLOCKS_RESULT,   /* RAMBlock synchronization */
-    RDMA_CONTROL_COMPRESS,            /* page contains repeat values */
-    RDMA_CONTROL_REGISTER_REQUEST,    /* dynamic page registration */
-    RDMA_CONTROL_REGISTER_RESULT,     /* key to use after registration */
-    RDMA_CONTROL_REGISTER_FINISHED,   /* current iteration finished */
-    RDMA_CONTROL_UNREGISTER_REQUEST,  /* dynamic UN-registration */
-    RDMA_CONTROL_UNREGISTER_FINISHED, /* unpinning finished */
-};
-
-
-/*
- * Memory and MR structures used to represent an IB Send/Recv work request.
- * This is *not* used for RDMA writes, only IB Send/Recv.
- */
-typedef struct {
-    uint8_t  control[RDMA_CONTROL_MAX_BUFFER]; /* actual buffer to register */
-    struct   ibv_mr *control_mr;               /* registration metadata */
-    size_t   control_len;                      /* length of the message */
-    uint8_t *control_curr;                     /* start of unconsumed bytes */
-} RDMAWorkRequestData;
-
-/*
- * Negotiate RDMA capabilities during connection-setup time.
- */
-typedef struct {
-    uint32_t version;
-    uint32_t flags;
-} RDMACapabilities;
-
-static void caps_to_network(RDMACapabilities *cap)
-{
-    cap->version = htonl(cap->version);
-    cap->flags = htonl(cap->flags);
-}
-
-static void network_to_caps(RDMACapabilities *cap)
-{
-    cap->version = ntohl(cap->version);
-    cap->flags = ntohl(cap->flags);
-}
-
-/*
- * Representation of a RAMBlock from an RDMA perspective.
- * This is not transmitted, only local.
- * This and subsequent structures cannot be linked lists
- * because we're using a single IB message to transmit
- * the information. It's small anyway, so a list is overkill.
- */
-typedef struct RDMALocalBlock {
-    char          *block_name;
-    uint8_t       *local_host_addr; /* local virtual address */
-    uint64_t       remote_host_addr; /* remote virtual address */
-    uint64_t       offset;
-    uint64_t       length;
-    struct         ibv_mr **pmr;    /* MRs for chunk-level registration */
-    struct         ibv_mr *mr;      /* MR for non-chunk-level registration */
-    uint32_t      *remote_keys;     /* rkeys for chunk-level registration */
-    uint32_t       remote_rkey;     /* rkeys for non-chunk-level registration */
-    int            index;           /* which block are we */
-    unsigned int   src_index;       /* (Only used on dest) */
-    bool           is_ram_block;
-    int            nb_chunks;
-    unsigned long *transit_bitmap;
-    unsigned long *unregister_bitmap;
-} RDMALocalBlock;
-
-/*
- * Also represents a RAMblock, but only on the dest.
- * This gets transmitted by the dest during connection-time
- * to the source VM and then is used to populate the
- * corresponding RDMALocalBlock with
- * the information needed to perform the actual RDMA.
- */
-typedef struct QEMU_PACKED RDMADestBlock {
-    uint64_t remote_host_addr;
-    uint64_t offset;
-    uint64_t length;
-    uint32_t remote_rkey;
-    uint32_t padding;
-} RDMADestBlock;
-
-static const char *control_desc(unsigned int rdma_control)
-{
-    static const char *strs[] = {
-        [RDMA_CONTROL_NONE] = "NONE",
-        [RDMA_CONTROL_ERROR] = "ERROR",
-        [RDMA_CONTROL_READY] = "READY",
-        [RDMA_CONTROL_QEMU_FILE] = "QEMU FILE",
-        [RDMA_CONTROL_RAM_BLOCKS_REQUEST] = "RAM BLOCKS REQUEST",
-        [RDMA_CONTROL_RAM_BLOCKS_RESULT] = "RAM BLOCKS RESULT",
-        [RDMA_CONTROL_COMPRESS] = "COMPRESS",
-        [RDMA_CONTROL_REGISTER_REQUEST] = "REGISTER REQUEST",
-        [RDMA_CONTROL_REGISTER_RESULT] = "REGISTER RESULT",
-        [RDMA_CONTROL_REGISTER_FINISHED] = "REGISTER FINISHED",
-        [RDMA_CONTROL_UNREGISTER_REQUEST] = "UNREGISTER REQUEST",
-        [RDMA_CONTROL_UNREGISTER_FINISHED] = "UNREGISTER FINISHED",
-    };
-
-    if (rdma_control > RDMA_CONTROL_UNREGISTER_FINISHED) {
-        return "??BAD CONTROL VALUE??";
-    }
-
-    return strs[rdma_control];
-}
-
-#if !defined(htonll)
-static uint64_t htonll(uint64_t v)
-{
-    union { uint32_t lv[2]; uint64_t llv; } u;
-    u.lv[0] = htonl(v >> 32);
-    u.lv[1] = htonl(v & 0xFFFFFFFFULL);
-    return u.llv;
-}
-#endif
-
-#if !defined(ntohll)
-static uint64_t ntohll(uint64_t v)
-{
-    union { uint32_t lv[2]; uint64_t llv; } u;
-    u.llv = v;
-    return ((uint64_t)ntohl(u.lv[0]) << 32) | (uint64_t) ntohl(u.lv[1]);
-}
-#endif
-
-static void dest_block_to_network(RDMADestBlock *db)
-{
-    db->remote_host_addr = htonll(db->remote_host_addr);
-    db->offset = htonll(db->offset);
-    db->length = htonll(db->length);
-    db->remote_rkey = htonl(db->remote_rkey);
-}
-
-static void network_to_dest_block(RDMADestBlock *db)
-{
-    db->remote_host_addr = ntohll(db->remote_host_addr);
-    db->offset = ntohll(db->offset);
-    db->length = ntohll(db->length);
-    db->remote_rkey = ntohl(db->remote_rkey);
-}
-
-/*
- * Virtual address of the above structures used for transmitting
- * the RAMBlock descriptions at connection-time.
- * This structure is *not* transmitted.
- */
-typedef struct RDMALocalBlocks {
-    int nb_blocks;
-    bool     init;             /* main memory init complete */
-    RDMALocalBlock *block;
-} RDMALocalBlocks;
-
-/*
- * Main data structure for RDMA state.
- * While there is only one copy of this structure being allocated right now,
- * this is the place where one would start if you wanted to consider
- * having more than one RDMA connection open at the same time.
- */
-typedef struct RDMAContext {
-    char *host;
-    int port;
-
-    RDMAWorkRequestData wr_data[RDMA_WRID_MAX];
-
-    /*
-     * This is used by *_exchange_send() to figure out whether or not
-     * the initial "READY" message has already been received or not.
-     * This is because other functions may potentially poll() and detect
-     * the READY message before send() does, in which case we need to
-     * know if it completed.
-     */
-    int control_ready_expected;
-
-    /* number of outstanding writes */
-    int nb_sent;
-
-    /* store info about current buffer so that we can
-       merge it with future sends */
-    uint64_t current_addr;
-    uint64_t current_length;
-    /* index of ram block the current buffer belongs to */
-    int current_index;
-    /* index of the chunk in the current ram block */
-    int current_chunk;
-
-    bool pin_all;
-
-    /*
-     * infiniband-specific variables for opening the device
-     * and maintaining connection state and so forth.
-     *
-     * cm_id also has ibv_context, rdma_event_channel, and ibv_qp in
-     * cm_id->verbs, cm_id->channel, and cm_id->qp.
-     */
-    struct rdma_cm_id *cm_id;               /* connection manager ID */
-    struct rdma_cm_id *listen_id;
-    bool connected;
-
-    struct ibv_context          *verbs;
-    struct rdma_event_channel   *channel;
-    struct ibv_qp *qp;                      /* queue pair */
-    struct ibv_comp_channel *recv_comp_channel;  /* recv completion channel */
-    struct ibv_comp_channel *send_comp_channel;  /* send completion channel */
-    struct ibv_pd *pd;                      /* protection domain */
-    struct ibv_cq *recv_cq;                 /* recvieve completion queue */
-    struct ibv_cq *send_cq;                 /* send completion queue */
-
-    /*
-     * If a previous write failed (perhaps because of a failed
-     * memory registration, then do not attempt any future work
-     * and remember the error state.
-     */
-    bool errored;
-    bool error_reported;
-    bool received_error;
-
-    /*
-     * Description of ram blocks used throughout the code.
-     */
-    RDMALocalBlocks local_ram_blocks;
-    RDMADestBlock  *dest_blocks;
-
-    /* Index of the next RAMBlock received during block registration */
-    unsigned int    next_src_index;
-
-    /*
-     * Migration on *destination* started.
-     * Then use coroutine yield function.
-     * Source runs in a thread, so we don't care.
-     */
-    int migration_started_on_destination;
-
-    int total_registrations;
-    int total_writes;
-
-    int unregister_current, unregister_next;
-    uint64_t unregistrations[RDMA_SIGNALED_SEND_MAX];
-
-    GHashTable *blockmap;
-
-    /* the RDMAContext for return path */
-    struct RDMAContext *return_path;
-    bool is_return_path;
-} RDMAContext;
-
-#define TYPE_QIO_CHANNEL_RDMA "qio-channel-rdma"
-OBJECT_DECLARE_SIMPLE_TYPE(QIOChannelRDMA, QIO_CHANNEL_RDMA)
-
-
-
-struct QIOChannelRDMA {
-    QIOChannel parent;
-    RDMAContext *rdmain;
-    RDMAContext *rdmaout;
-    QEMUFile *file;
-    bool blocking; /* XXX we don't actually honour this yet */
-};
-
-/*
- * Main structure for IB Send/Recv control messages.
- * This gets prepended at the beginning of every Send/Recv.
- */
-typedef struct QEMU_PACKED {
-    uint32_t len;     /* Total length of data portion */
-    uint32_t type;    /* which control command to perform */
-    uint32_t repeat;  /* number of commands in data portion of same type */
-    uint32_t padding;
-} RDMAControlHeader;
-
-static void control_to_network(RDMAControlHeader *control)
-{
-    control->type = htonl(control->type);
-    control->len = htonl(control->len);
-    control->repeat = htonl(control->repeat);
-}
-
-static void network_to_control(RDMAControlHeader *control)
-{
-    control->type = ntohl(control->type);
-    control->len = ntohl(control->len);
-    control->repeat = ntohl(control->repeat);
-}
-
-/*
- * Register a single Chunk.
- * Information sent by the source VM to inform the dest
- * to register an single chunk of memory before we can perform
- * the actual RDMA operation.
- */
-typedef struct QEMU_PACKED {
-    union QEMU_PACKED {
-        uint64_t current_addr;  /* offset into the ram_addr_t space */
-        uint64_t chunk;         /* chunk to lookup if unregistering */
-    } key;
-    uint32_t current_index; /* which ramblock the chunk belongs to */
-    uint32_t padding;
-    uint64_t chunks;            /* how many sequential chunks to register */
-} RDMARegister;
-
-static bool rdma_errored(RDMAContext *rdma)
-{
-    if (rdma->errored && !rdma->error_reported) {
-        error_report("RDMA is in an error state waiting migration"
-                     " to abort!");
-        rdma->error_reported = true;
-    }
-    return rdma->errored;
-}
-
-static void register_to_network(RDMAContext *rdma, RDMARegister *reg)
-{
-    RDMALocalBlock *local_block;
-    local_block  = &rdma->local_ram_blocks.block[reg->current_index];
-
-    if (local_block->is_ram_block) {
-        /*
-         * current_addr as passed in is an address in the local ram_addr_t
-         * space, we need to translate this for the destination
-         */
-        reg->key.current_addr -= local_block->offset;
-        reg->key.current_addr += rdma->dest_blocks[reg->current_index].offset;
-    }
-    reg->key.current_addr = htonll(reg->key.current_addr);
-    reg->current_index = htonl(reg->current_index);
-    reg->chunks = htonll(reg->chunks);
-}
-
-static void network_to_register(RDMARegister *reg)
-{
-    reg->key.current_addr = ntohll(reg->key.current_addr);
-    reg->current_index = ntohl(reg->current_index);
-    reg->chunks = ntohll(reg->chunks);
-}
-
-typedef struct QEMU_PACKED {
-    uint32_t value;     /* if zero, we will madvise() */
-    uint32_t block_idx; /* which ram block index */
-    uint64_t offset;    /* Address in remote ram_addr_t space */
-    uint64_t length;    /* length of the chunk */
-} RDMACompress;
-
-static void compress_to_network(RDMAContext *rdma, RDMACompress *comp)
-{
-    comp->value = htonl(comp->value);
-    /*
-     * comp->offset as passed in is an address in the local ram_addr_t
-     * space, we need to translate this for the destination
-     */
-    comp->offset -= rdma->local_ram_blocks.block[comp->block_idx].offset;
-    comp->offset += rdma->dest_blocks[comp->block_idx].offset;
-    comp->block_idx = htonl(comp->block_idx);
-    comp->offset = htonll(comp->offset);
-    comp->length = htonll(comp->length);
-}
-
-static void network_to_compress(RDMACompress *comp)
-{
-    comp->value = ntohl(comp->value);
-    comp->block_idx = ntohl(comp->block_idx);
-    comp->offset = ntohll(comp->offset);
-    comp->length = ntohll(comp->length);
-}
-
-/*
- * The result of the dest's memory registration produces an "rkey"
- * which the source VM must reference in order to perform
- * the RDMA operation.
- */
-typedef struct QEMU_PACKED {
-    uint32_t rkey;
-    uint32_t padding;
-    uint64_t host_addr;
-} RDMARegisterResult;
-
-static void result_to_network(RDMARegisterResult *result)
-{
-    result->rkey = htonl(result->rkey);
-    result->host_addr = htonll(result->host_addr);
-};
-
-static void network_to_result(RDMARegisterResult *result)
-{
-    result->rkey = ntohl(result->rkey);
-    result->host_addr = ntohll(result->host_addr);
-};
-
-static int qemu_rdma_exchange_send(RDMAContext *rdma, RDMAControlHeader *head,
-                                   uint8_t *data, RDMAControlHeader *resp,
-                                   int *resp_idx,
-                                   int (*callback)(RDMAContext *rdma,
-                                                   Error **errp),
-                                   Error **errp);
-
-static inline uint64_t ram_chunk_index(const uint8_t *start,
-                                       const uint8_t *host)
-{
-    return ((uintptr_t) host - (uintptr_t) start) >> RDMA_REG_CHUNK_SHIFT;
-}
-
-static inline uint8_t *ram_chunk_start(const RDMALocalBlock *rdma_ram_block,
-                                       uint64_t i)
-{
-    return (uint8_t *)(uintptr_t)(rdma_ram_block->local_host_addr +
-                                  (i << RDMA_REG_CHUNK_SHIFT));
-}
-
-static inline uint8_t *ram_chunk_end(const RDMALocalBlock *rdma_ram_block,
-                                     uint64_t i)
-{
-    uint8_t *result = ram_chunk_start(rdma_ram_block, i) +
-                                         (1UL << RDMA_REG_CHUNK_SHIFT);
-
-    if (result > (rdma_ram_block->local_host_addr + rdma_ram_block->length)) {
-        result = rdma_ram_block->local_host_addr + rdma_ram_block->length;
-    }
-
-    return result;
-}
-
-static void rdma_add_block(RDMAContext *rdma, const char *block_name,
-                           void *host_addr,
-                           ram_addr_t block_offset, uint64_t length)
-{
-    RDMALocalBlocks *local = &rdma->local_ram_blocks;
-    RDMALocalBlock *block;
-    RDMALocalBlock *old = local->block;
-
-    local->block = g_new0(RDMALocalBlock, local->nb_blocks + 1);
-
-    if (local->nb_blocks) {
-        if (rdma->blockmap) {
-            for (int x = 0; x < local->nb_blocks; x++) {
-                g_hash_table_remove(rdma->blockmap,
-                                    (void *)(uintptr_t)old[x].offset);
-                g_hash_table_insert(rdma->blockmap,
-                                    (void *)(uintptr_t)old[x].offset,
-                                    &local->block[x]);
-            }
-        }
-        memcpy(local->block, old, sizeof(RDMALocalBlock) * local->nb_blocks);
-        g_free(old);
-    }
-
-    block = &local->block[local->nb_blocks];
-
-    block->block_name = g_strdup(block_name);
-    block->local_host_addr = host_addr;
-    block->offset = block_offset;
-    block->length = length;
-    block->index = local->nb_blocks;
-    block->src_index = ~0U; /* Filled in by the receipt of the block list */
-    block->nb_chunks = ram_chunk_index(host_addr, host_addr + length) + 1UL;
-    block->transit_bitmap = bitmap_new(block->nb_chunks);
-    bitmap_clear(block->transit_bitmap, 0, block->nb_chunks);
-    block->unregister_bitmap = bitmap_new(block->nb_chunks);
-    bitmap_clear(block->unregister_bitmap, 0, block->nb_chunks);
-    block->remote_keys = g_new0(uint32_t, block->nb_chunks);
-
-    block->is_ram_block = local->init ? false : true;
-
-    if (rdma->blockmap) {
-        g_hash_table_insert(rdma->blockmap, (void *)(uintptr_t)block_offset, block);
-    }
-
-    trace_rdma_add_block(block_name, local->nb_blocks,
-                         (uintptr_t) block->local_host_addr,
-                         block->offset, block->length,
-                         (uintptr_t) (block->local_host_addr + block->length),
-                         BITS_TO_LONGS(block->nb_chunks) *
-                             sizeof(unsigned long) * 8,
-                         block->nb_chunks);
-
-    local->nb_blocks++;
-}
-
-/*
- * Memory regions need to be registered with the device and queue pairs setup
- * in advanced before the migration starts. This tells us where the RAM blocks
- * are so that we can register them individually.
- */
-static int qemu_rdma_init_one_block(RAMBlock *rb, void *opaque)
-{
-    const char *block_name = qemu_ram_get_idstr(rb);
-    void *host_addr = qemu_ram_get_host_addr(rb);
-    ram_addr_t block_offset = qemu_ram_get_offset(rb);
-    ram_addr_t length = qemu_ram_get_used_length(rb);
-    rdma_add_block(opaque, block_name, host_addr, block_offset, length);
-    return 0;
-}
-
-/*
- * Identify the RAMBlocks and their quantity. They will be references to
- * identify chunk boundaries inside each RAMBlock and also be referenced
- * during dynamic page registration.
- */
-static void qemu_rdma_init_ram_blocks(RDMAContext *rdma)
-{
-    RDMALocalBlocks *local = &rdma->local_ram_blocks;
-    int ret;
-
-    assert(rdma->blockmap == NULL);
-    memset(local, 0, sizeof *local);
-    ret = foreach_not_ignored_block(qemu_rdma_init_one_block, rdma);
-    assert(!ret);
-    trace_qemu_rdma_init_ram_blocks(local->nb_blocks);
-    rdma->dest_blocks = g_new0(RDMADestBlock,
-                               rdma->local_ram_blocks.nb_blocks);
-    local->init = true;
-}
-
-/*
- * Note: If used outside of cleanup, the caller must ensure that the destination
- * block structures are also updated
- */
-static void rdma_delete_block(RDMAContext *rdma, RDMALocalBlock *block)
-{
-    RDMALocalBlocks *local = &rdma->local_ram_blocks;
-    RDMALocalBlock *old = local->block;
-
-    if (rdma->blockmap) {
-        g_hash_table_remove(rdma->blockmap, (void *)(uintptr_t)block->offset);
-    }
-    if (block->pmr) {
-        for (int j = 0; j < block->nb_chunks; j++) {
-            if (!block->pmr[j]) {
-                continue;
-            }
-            ibv_dereg_mr(block->pmr[j]);
-            rdma->total_registrations--;
-        }
-        g_free(block->pmr);
-        block->pmr = NULL;
-    }
-
-    if (block->mr) {
-        ibv_dereg_mr(block->mr);
-        rdma->total_registrations--;
-        block->mr = NULL;
-    }
-
-    g_free(block->transit_bitmap);
-    block->transit_bitmap = NULL;
-
-    g_free(block->unregister_bitmap);
-    block->unregister_bitmap = NULL;
-
-    g_free(block->remote_keys);
-    block->remote_keys = NULL;
-
-    g_free(block->block_name);
-    block->block_name = NULL;
-
-    if (rdma->blockmap) {
-        for (int x = 0; x < local->nb_blocks; x++) {
-            g_hash_table_remove(rdma->blockmap,
-                                (void *)(uintptr_t)old[x].offset);
-        }
-    }
-
-    if (local->nb_blocks > 1) {
-
-        local->block = g_new0(RDMALocalBlock, local->nb_blocks - 1);
-
-        if (block->index) {
-            memcpy(local->block, old, sizeof(RDMALocalBlock) * block->index);
-        }
-
-        if (block->index < (local->nb_blocks - 1)) {
-            memcpy(local->block + block->index, old + (block->index + 1),
-                sizeof(RDMALocalBlock) *
-                    (local->nb_blocks - (block->index + 1)));
-            for (int x = block->index; x < local->nb_blocks - 1; x++) {
-                local->block[x].index--;
-            }
-        }
-    } else {
-        assert(block == local->block);
-        local->block = NULL;
-    }
-
-    trace_rdma_delete_block(block, (uintptr_t)block->local_host_addr,
-                           block->offset, block->length,
-                            (uintptr_t)(block->local_host_addr + block->length),
-                           BITS_TO_LONGS(block->nb_chunks) *
-                               sizeof(unsigned long) * 8, block->nb_chunks);
-
-    g_free(old);
-
-    local->nb_blocks--;
-
-    if (local->nb_blocks && rdma->blockmap) {
-        for (int x = 0; x < local->nb_blocks; x++) {
-            g_hash_table_insert(rdma->blockmap,
-                                (void *)(uintptr_t)local->block[x].offset,
-                                &local->block[x]);
-        }
-    }
-}
-
-/*
- * Trace RDMA device open, with device details.
- */
-static void qemu_rdma_dump_id(const char *who, struct ibv_context *verbs)
-{
-    struct ibv_port_attr port;
-
-    if (ibv_query_port(verbs, 1, &port)) {
-        trace_qemu_rdma_dump_id_failed(who);
-        return;
-    }
-
-    trace_qemu_rdma_dump_id(who,
-                verbs->device->name,
-                verbs->device->dev_name,
-                verbs->device->dev_path,
-                verbs->device->ibdev_path,
-                port.link_layer,
-                port.link_layer == IBV_LINK_LAYER_INFINIBAND ? "Infiniband"
-                : port.link_layer == IBV_LINK_LAYER_ETHERNET ? "Ethernet"
-                : "Unknown");
-}
-
-/*
- * Trace RDMA gid addressing information.
- * Useful for understanding the RDMA device hierarchy in the kernel.
- */
-static void qemu_rdma_dump_gid(const char *who, struct rdma_cm_id *id)
-{
-    char sgid[33];
-    char dgid[33];
-    inet_ntop(AF_INET6, &id->route.addr.addr.ibaddr.sgid, sgid, sizeof sgid);
-    inet_ntop(AF_INET6, &id->route.addr.addr.ibaddr.dgid, dgid, sizeof dgid);
-    trace_qemu_rdma_dump_gid(who, sgid, dgid);
-}
-
-/*
- * As of now, IPv6 over RoCE / iWARP is not supported by linux.
- * We will try the next addrinfo struct, and fail if there are
- * no other valid addresses to bind against.
- *
- * If user is listening on '[::]', then we will not have a opened a device
- * yet and have no way of verifying if the device is RoCE or not.
- *
- * In this case, the source VM will throw an error for ALL types of
- * connections (both IPv4 and IPv6) if the destination machine does not have
- * a regular infiniband network available for use.
- *
- * The only way to guarantee that an error is thrown for broken kernels is
- * for the management software to choose a *specific* interface at bind time
- * and validate what time of hardware it is.
- *
- * Unfortunately, this puts the user in a fix:
- *
- *  If the source VM connects with an IPv4 address without knowing that the
- *  destination has bound to '[::]' the migration will unconditionally fail
- *  unless the management software is explicitly listening on the IPv4
- *  address while using a RoCE-based device.
- *
- *  If the source VM connects with an IPv6 address, then we're OK because we can
- *  throw an error on the source (and similarly on the destination).
- *
- *  But in mixed environments, this will be broken for a while until it is fixed
- *  inside linux.
- *
- * We do provide a *tiny* bit of help in this function: We can list all of the
- * devices in the system and check to see if all the devices are RoCE or
- * Infiniband.
- *
- * If we detect that we have a *pure* RoCE environment, then we can safely
- * thrown an error even if the management software has specified '[::]' as the
- * bind address.
- *
- * However, if there is are multiple hetergeneous devices, then we cannot make
- * this assumption and the user just has to be sure they know what they are
- * doing.
- *
- * Patches are being reviewed on linux-rdma.
- */
-static int qemu_rdma_broken_ipv6_kernel(struct ibv_context *verbs, Error **errp)
-{
-    /* This bug only exists in linux, to our knowledge. */
-#ifdef CONFIG_LINUX
-    struct ibv_port_attr port_attr;
-
-    /*
-     * Verbs are only NULL if management has bound to '[::]'.
-     *
-     * Let's iterate through all the devices and see if there any pure IB
-     * devices (non-ethernet).
-     *
-     * If not, then we can safely proceed with the migration.
-     * Otherwise, there are no guarantees until the bug is fixed in linux.
-     */
-    if (!verbs) {
-        int num_devices;
-        struct ibv_device **dev_list = ibv_get_device_list(&num_devices);
-        bool roce_found = false;
-        bool ib_found = false;
-
-        for (int x = 0; x < num_devices; x++) {
-            verbs = ibv_open_device(dev_list[x]);
-            /*
-             * ibv_open_device() is not documented to set errno.  If
-             * it does, it's somebody else's doc bug.  If it doesn't,
-             * the use of errno below is wrong.
-             * TODO Find out whether ibv_open_device() sets errno.
-             */
-            if (!verbs) {
-                if (errno == EPERM) {
-                    continue;
-                } else {
-                    error_setg_errno(errp, errno,
-                                     "could not open RDMA device context");
-                    return -1;
-                }
-            }
-
-            if (ibv_query_port(verbs, 1, &port_attr)) {
-                ibv_close_device(verbs);
-                error_setg(errp,
-                           "RDMA ERROR: Could not query initial IB port");
-                return -1;
-            }
-
-            if (port_attr.link_layer == IBV_LINK_LAYER_INFINIBAND) {
-                ib_found = true;
-            } else if (port_attr.link_layer == IBV_LINK_LAYER_ETHERNET) {
-                roce_found = true;
-            }
-
-            ibv_close_device(verbs);
-
-        }
-
-        if (roce_found) {
-            if (ib_found) {
-                warn_report("migrations may fail:"
-                            " IPv6 over RoCE / iWARP in linux"
-                            " is broken. But since you appear to have a"
-                            " mixed RoCE / IB environment, be sure to only"
-                            " migrate over the IB fabric until the kernel "
-                            " fixes the bug.");
-            } else {
-                error_setg(errp, "RDMA ERROR: "
-                           "You only have RoCE / iWARP devices in your systems"
-                           " and your management software has specified '[::]'"
-                           ", but IPv6 over RoCE / iWARP is not supported in Linux.");
-                return -1;
-            }
-        }
-
-        return 0;
-    }
-
-    /*
-     * If we have a verbs context, that means that some other than '[::]' was
-     * used by the management software for binding. In which case we can
-     * actually warn the user about a potentially broken kernel.
-     */
-
-    /* IB ports start with 1, not 0 */
-    if (ibv_query_port(verbs, 1, &port_attr)) {
-        error_setg(errp, "RDMA ERROR: Could not query initial IB port");
-        return -1;
-    }
-
-    if (port_attr.link_layer == IBV_LINK_LAYER_ETHERNET) {
-        error_setg(errp, "RDMA ERROR: "
-                   "Linux kernel's RoCE / iWARP does not support IPv6 "
-                   "(but patches on linux-rdma in progress)");
-        return -1;
-    }
-
-#endif
-
-    return 0;
-}
-
-/*
- * Figure out which RDMA device corresponds to the requested IP hostname
- * Also create the initial connection manager identifiers for opening
- * the connection.
- */
-static int qemu_rdma_resolve_host(RDMAContext *rdma, Error **errp)
-{
-    Error *err = NULL;
-    int ret;
-    struct rdma_addrinfo *res;
-    char port_str[16];
-    struct rdma_cm_event *cm_event;
-    char ip[40] = "unknown";
-
-    if (rdma->host == NULL || !strcmp(rdma->host, "")) {
-        error_setg(errp, "RDMA ERROR: RDMA hostname has not been set");
-        return -1;
-    }
-
-    /* create CM channel */
-    rdma->channel = rdma_create_event_channel();
-    if (!rdma->channel) {
-        error_setg(errp, "RDMA ERROR: could not create CM channel");
-        return -1;
-    }
-
-    /* create CM id */
-    ret = rdma_create_id(rdma->channel, &rdma->cm_id, NULL, RDMA_PS_TCP);
-    if (ret < 0) {
-        error_setg(errp, "RDMA ERROR: could not create channel id");
-        goto err_resolve_create_id;
-    }
-
-    snprintf(port_str, 16, "%d", rdma->port);
-    port_str[15] = '\0';
-
-    ret = rdma_getaddrinfo(rdma->host, port_str, NULL, &res);
-    if (ret) {
-        error_setg(errp, "RDMA ERROR: could not rdma_getaddrinfo address %s",
-                   rdma->host);
-        goto err_resolve_get_addr;
-    }
-
-    /* Try all addresses, saving the first error in @err */
-    for (struct rdma_addrinfo *e = res; e != NULL; e = e->ai_next) {
-        Error **local_errp = err ? NULL : &err;
-
-        inet_ntop(e->ai_family,
-            &((struct sockaddr_in *) e->ai_dst_addr)->sin_addr, ip, sizeof ip);
-        trace_qemu_rdma_resolve_host_trying(rdma->host, ip);
-
-        ret = rdma_resolve_addr(rdma->cm_id, NULL, e->ai_dst_addr,
-                RDMA_RESOLVE_TIMEOUT_MS);
-        if (ret >= 0) {
-            if (e->ai_family == AF_INET6) {
-                ret = qemu_rdma_broken_ipv6_kernel(rdma->cm_id->verbs,
-                                                   local_errp);
-                if (ret < 0) {
-                    continue;
-                }
-            }
-            error_free(err);
-            goto route;
-        }
-    }
-
-    rdma_freeaddrinfo(res);
-    if (err) {
-        error_propagate(errp, err);
-    } else {
-        error_setg(errp, "RDMA ERROR: could not resolve address %s",
-                   rdma->host);
-    }
-    goto err_resolve_get_addr;
-
-route:
-    rdma_freeaddrinfo(res);
-    qemu_rdma_dump_gid("source_resolve_addr", rdma->cm_id);
-
-    ret = rdma_get_cm_event(rdma->channel, &cm_event);
-    if (ret < 0) {
-        error_setg(errp, "RDMA ERROR: could not perform event_addr_resolved");
-        goto err_resolve_get_addr;
-    }
-
-    if (cm_event->event != RDMA_CM_EVENT_ADDR_RESOLVED) {
-        error_setg(errp,
-                   "RDMA ERROR: result not equal to event_addr_resolved %s",
-                   rdma_event_str(cm_event->event));
-        rdma_ack_cm_event(cm_event);
-        goto err_resolve_get_addr;
-    }
-    rdma_ack_cm_event(cm_event);
-
-    /* resolve route */
-    ret = rdma_resolve_route(rdma->cm_id, RDMA_RESOLVE_TIMEOUT_MS);
-    if (ret < 0) {
-        error_setg(errp, "RDMA ERROR: could not resolve rdma route");
-        goto err_resolve_get_addr;
-    }
-
-    ret = rdma_get_cm_event(rdma->channel, &cm_event);
-    if (ret < 0) {
-        error_setg(errp, "RDMA ERROR: could not perform event_route_resolved");
-        goto err_resolve_get_addr;
-    }
-    if (cm_event->event != RDMA_CM_EVENT_ROUTE_RESOLVED) {
-        error_setg(errp, "RDMA ERROR: "
-                   "result not equal to event_route_resolved: %s",
-                   rdma_event_str(cm_event->event));
-        rdma_ack_cm_event(cm_event);
-        goto err_resolve_get_addr;
-    }
-    rdma_ack_cm_event(cm_event);
-    rdma->verbs = rdma->cm_id->verbs;
-    qemu_rdma_dump_id("source_resolve_host", rdma->cm_id->verbs);
-    qemu_rdma_dump_gid("source_resolve_host", rdma->cm_id);
-    return 0;
-
-err_resolve_get_addr:
-    rdma_destroy_id(rdma->cm_id);
-    rdma->cm_id = NULL;
-err_resolve_create_id:
-    rdma_destroy_event_channel(rdma->channel);
-    rdma->channel = NULL;
-    return -1;
-}
-
-/*
- * Create protection domain and completion queues
- */
-static int qemu_rdma_alloc_pd_cq(RDMAContext *rdma, Error **errp)
-{
-    /* allocate pd */
-    rdma->pd = ibv_alloc_pd(rdma->verbs);
-    if (!rdma->pd) {
-        error_setg(errp, "failed to allocate protection domain");
-        return -1;
-    }
-
-    /* create receive completion channel */
-    rdma->recv_comp_channel = ibv_create_comp_channel(rdma->verbs);
-    if (!rdma->recv_comp_channel) {
-        error_setg(errp, "failed to allocate receive completion channel");
-        goto err_alloc_pd_cq;
-    }
-
-    /*
-     * Completion queue can be filled by read work requests.
-     */
-    rdma->recv_cq = ibv_create_cq(rdma->verbs, (RDMA_SIGNALED_SEND_MAX * 3),
-                                  NULL, rdma->recv_comp_channel, 0);
-    if (!rdma->recv_cq) {
-        error_setg(errp, "failed to allocate receive completion queue");
-        goto err_alloc_pd_cq;
-    }
-
-    /* create send completion channel */
-    rdma->send_comp_channel = ibv_create_comp_channel(rdma->verbs);
-    if (!rdma->send_comp_channel) {
-        error_setg(errp, "failed to allocate send completion channel");
-        goto err_alloc_pd_cq;
-    }
-
-    rdma->send_cq = ibv_create_cq(rdma->verbs, (RDMA_SIGNALED_SEND_MAX * 3),
-                                  NULL, rdma->send_comp_channel, 0);
-    if (!rdma->send_cq) {
-        error_setg(errp, "failed to allocate send completion queue");
-        goto err_alloc_pd_cq;
-    }
-
-    return 0;
-
-err_alloc_pd_cq:
-    if (rdma->pd) {
-        ibv_dealloc_pd(rdma->pd);
-    }
-    if (rdma->recv_comp_channel) {
-        ibv_destroy_comp_channel(rdma->recv_comp_channel);
-    }
-    if (rdma->send_comp_channel) {
-        ibv_destroy_comp_channel(rdma->send_comp_channel);
-    }
-    if (rdma->recv_cq) {
-        ibv_destroy_cq(rdma->recv_cq);
-        rdma->recv_cq = NULL;
-    }
-    rdma->pd = NULL;
-    rdma->recv_comp_channel = NULL;
-    rdma->send_comp_channel = NULL;
-    return -1;
-
-}
-
-/*
- * Create queue pairs.
- */
-static int qemu_rdma_alloc_qp(RDMAContext *rdma)
-{
-    struct ibv_qp_init_attr attr = { 0 };
-
-    attr.cap.max_send_wr = RDMA_SIGNALED_SEND_MAX;
-    attr.cap.max_recv_wr = 3;
-    attr.cap.max_send_sge = 1;
-    attr.cap.max_recv_sge = 1;
-    attr.send_cq = rdma->send_cq;
-    attr.recv_cq = rdma->recv_cq;
-    attr.qp_type = IBV_QPT_RC;
-
-    if (rdma_create_qp(rdma->cm_id, rdma->pd, &attr) < 0) {
-        return -1;
-    }
-
-    rdma->qp = rdma->cm_id->qp;
-    return 0;
-}
-
-/* Check whether On-Demand Paging is supported by RDAM device */
-static bool rdma_support_odp(struct ibv_context *dev)
-{
-    struct ibv_device_attr_ex attr = {0};
-
-    if (ibv_query_device_ex(dev, NULL, &attr)) {
-        return false;
-    }
-
-    if (attr.odp_caps.general_caps & IBV_ODP_SUPPORT) {
-        return true;
-    }
-
-    return false;
-}
-
-/*
- * ibv_advise_mr to avoid RNR NAK error as far as possible.
- * The responder mr registering with ODP will sent RNR NAK back to
- * the requester in the face of the page fault.
- */
-static void qemu_rdma_advise_prefetch_mr(struct ibv_pd *pd, uint64_t addr,
-                                         uint32_t len,  uint32_t lkey,
-                                         const char *name, bool wr)
-{
-#ifdef HAVE_IBV_ADVISE_MR
-    int ret;
-    int advice = wr ? IBV_ADVISE_MR_ADVICE_PREFETCH_WRITE :
-                 IBV_ADVISE_MR_ADVICE_PREFETCH;
-    struct ibv_sge sg_list = {.lkey = lkey, .addr = addr, .length = len};
-
-    ret = ibv_advise_mr(pd, advice,
-                        IBV_ADVISE_MR_FLAG_FLUSH, &sg_list, 1);
-    /* ignore the error */
-    trace_qemu_rdma_advise_mr(name, len, addr, strerror(ret));
-#endif
-}
-
-static int qemu_rdma_reg_whole_ram_blocks(RDMAContext *rdma, Error **errp)
-{
-    int i;
-    RDMALocalBlocks *local = &rdma->local_ram_blocks;
-
-    for (i = 0; i < local->nb_blocks; i++) {
-        int access = IBV_ACCESS_LOCAL_WRITE | IBV_ACCESS_REMOTE_WRITE;
-
-        local->block[i].mr =
-            ibv_reg_mr(rdma->pd,
-                    local->block[i].local_host_addr,
-                    local->block[i].length, access
-                    );
-        /*
-         * ibv_reg_mr() is not documented to set errno.  If it does,
-         * it's somebody else's doc bug.  If it doesn't, the use of
-         * errno below is wrong.
-         * TODO Find out whether ibv_reg_mr() sets errno.
-         */
-        if (!local->block[i].mr &&
-            errno == ENOTSUP && rdma_support_odp(rdma->verbs)) {
-                access |= IBV_ACCESS_ON_DEMAND;
-                /* register ODP mr */
-                local->block[i].mr =
-                    ibv_reg_mr(rdma->pd,
-                               local->block[i].local_host_addr,
-                               local->block[i].length, access);
-                trace_qemu_rdma_register_odp_mr(local->block[i].block_name);
-
-                if (local->block[i].mr) {
-                    qemu_rdma_advise_prefetch_mr(rdma->pd,
-                                    (uintptr_t)local->block[i].local_host_addr,
-                                    local->block[i].length,
-                                    local->block[i].mr->lkey,
-                                    local->block[i].block_name,
-                                    true);
-                }
-        }
-
-        if (!local->block[i].mr) {
-            error_setg_errno(errp, errno,
-                             "Failed to register local dest ram block!");
-            goto err;
-        }
-        rdma->total_registrations++;
-    }
-
-    return 0;
-
-err:
-    for (i--; i >= 0; i--) {
-        ibv_dereg_mr(local->block[i].mr);
-        local->block[i].mr = NULL;
-        rdma->total_registrations--;
-    }
-
-    return -1;
-
-}
-
-/*
- * Find the ram block that corresponds to the page requested to be
- * transmitted by QEMU.
- *
- * Once the block is found, also identify which 'chunk' within that
- * block that the page belongs to.
- */
-static void qemu_rdma_search_ram_block(RDMAContext *rdma,
-                                       uintptr_t block_offset,
-                                       uint64_t offset,
-                                       uint64_t length,
-                                       uint64_t *block_index,
-                                       uint64_t *chunk_index)
-{
-    uint64_t current_addr = block_offset + offset;
-    RDMALocalBlock *block = g_hash_table_lookup(rdma->blockmap,
-                                                (void *) block_offset);
-    assert(block);
-    assert(current_addr >= block->offset);
-    assert((current_addr + length) <= (block->offset + block->length));
-
-    *block_index = block->index;
-    *chunk_index = ram_chunk_index(block->local_host_addr,
-                block->local_host_addr + (current_addr - block->offset));
-}
-
-/*
- * Register a chunk with IB. If the chunk was already registered
- * previously, then skip.
- *
- * Also return the keys associated with the registration needed
- * to perform the actual RDMA operation.
- */
-static int qemu_rdma_register_and_get_keys(RDMAContext *rdma,
-        RDMALocalBlock *block, uintptr_t host_addr,
-        uint32_t *lkey, uint32_t *rkey, int chunk,
-        uint8_t *chunk_start, uint8_t *chunk_end)
-{
-    if (block->mr) {
-        if (lkey) {
-            *lkey = block->mr->lkey;
-        }
-        if (rkey) {
-            *rkey = block->mr->rkey;
-        }
-        return 0;
-    }
-
-    /* allocate memory to store chunk MRs */
-    if (!block->pmr) {
-        block->pmr = g_new0(struct ibv_mr *, block->nb_chunks);
-    }
-
-    /*
-     * If 'rkey', then we're the destination, so grant access to the source.
-     *
-     * If 'lkey', then we're the source VM, so grant access only to ourselves.
-     */
-    if (!block->pmr[chunk]) {
-        uint64_t len = chunk_end - chunk_start;
-        int access = rkey ? IBV_ACCESS_LOCAL_WRITE | IBV_ACCESS_REMOTE_WRITE :
-                     0;
-
-        trace_qemu_rdma_register_and_get_keys(len, chunk_start);
-
-        block->pmr[chunk] = ibv_reg_mr(rdma->pd, chunk_start, len, access);
-        /*
-         * ibv_reg_mr() is not documented to set errno.  If it does,
-         * it's somebody else's doc bug.  If it doesn't, the use of
-         * errno below is wrong.
-         * TODO Find out whether ibv_reg_mr() sets errno.
-         */
-        if (!block->pmr[chunk] &&
-            errno == ENOTSUP && rdma_support_odp(rdma->verbs)) {
-            access |= IBV_ACCESS_ON_DEMAND;
-            /* register ODP mr */
-            block->pmr[chunk] = ibv_reg_mr(rdma->pd, chunk_start, len, access);
-            trace_qemu_rdma_register_odp_mr(block->block_name);
-
-            if (block->pmr[chunk]) {
-                qemu_rdma_advise_prefetch_mr(rdma->pd, (uintptr_t)chunk_start,
-                                            len, block->pmr[chunk]->lkey,
-                                            block->block_name, rkey);
-
-            }
-        }
-    }
-    if (!block->pmr[chunk]) {
-        return -1;
-    }
-    rdma->total_registrations++;
-
-    if (lkey) {
-        *lkey = block->pmr[chunk]->lkey;
-    }
-    if (rkey) {
-        *rkey = block->pmr[chunk]->rkey;
-    }
-    return 0;
-}
-
-/*
- * Register (at connection time) the memory used for control
- * channel messages.
- */
-static int qemu_rdma_reg_control(RDMAContext *rdma, int idx)
-{
-    rdma->wr_data[idx].control_mr = ibv_reg_mr(rdma->pd,
-            rdma->wr_data[idx].control, RDMA_CONTROL_MAX_BUFFER,
-            IBV_ACCESS_LOCAL_WRITE | IBV_ACCESS_REMOTE_WRITE);
-    if (rdma->wr_data[idx].control_mr) {
-        rdma->total_registrations++;
-        return 0;
-    }
-    return -1;
-}
-
-/*
- * Perform a non-optimized memory unregistration after every transfer
- * for demonstration purposes, only if pin-all is not requested.
- *
- * Potential optimizations:
- * 1. Start a new thread to run this function continuously
-        - for bit clearing
-        - and for receipt of unregister messages
- * 2. Use an LRU.
- * 3. Use workload hints.
- */
-static int qemu_rdma_unregister_waiting(RDMAContext *rdma)
-{
-    Error *err = NULL;
-
-    while (rdma->unregistrations[rdma->unregister_current]) {
-        int ret;
-        uint64_t wr_id = rdma->unregistrations[rdma->unregister_current];
-        uint64_t chunk =
-            (wr_id & RDMA_WRID_CHUNK_MASK) >> RDMA_WRID_CHUNK_SHIFT;
-        uint64_t index =
-            (wr_id & RDMA_WRID_BLOCK_MASK) >> RDMA_WRID_BLOCK_SHIFT;
-        RDMALocalBlock *block =
-            &(rdma->local_ram_blocks.block[index]);
-        RDMARegister reg = { .current_index = index };
-        RDMAControlHeader resp = { .type = RDMA_CONTROL_UNREGISTER_FINISHED,
-                                 };
-        RDMAControlHeader head = { .len = sizeof(RDMARegister),
-                                   .type = RDMA_CONTROL_UNREGISTER_REQUEST,
-                                   .repeat = 1,
-                                 };
-
-        trace_qemu_rdma_unregister_waiting_proc(chunk,
-                                                rdma->unregister_current);
-
-        rdma->unregistrations[rdma->unregister_current] = 0;
-        rdma->unregister_current++;
-
-        if (rdma->unregister_current == RDMA_SIGNALED_SEND_MAX) {
-            rdma->unregister_current = 0;
-        }
-
-
-        /*
-         * Unregistration is speculative (because migration is single-threaded
-         * and we cannot break the protocol's inifinband message ordering).
-         * Thus, if the memory is currently being used for transmission,
-         * then abort the attempt to unregister and try again
-         * later the next time a completion is received for this memory.
-         */
-        clear_bit(chunk, block->unregister_bitmap);
-
-        if (test_bit(chunk, block->transit_bitmap)) {
-            trace_qemu_rdma_unregister_waiting_inflight(chunk);
-            continue;
-        }
-
-        trace_qemu_rdma_unregister_waiting_send(chunk);
-
-        ret = ibv_dereg_mr(block->pmr[chunk]);
-        block->pmr[chunk] = NULL;
-        block->remote_keys[chunk] = 0;
-
-        if (ret != 0) {
-            error_report("unregistration chunk failed: %s",
-                         strerror(ret));
-            return -1;
-        }
-        rdma->total_registrations--;
-
-        reg.key.chunk = chunk;
-        register_to_network(rdma, &reg);
-        ret = qemu_rdma_exchange_send(rdma, &head, (uint8_t *) &reg,
-                                      &resp, NULL, NULL, &err);
-        if (ret < 0) {
-            error_report_err(err);
-            return -1;
-        }
-
-        trace_qemu_rdma_unregister_waiting_complete(chunk);
-    }
-
-    return 0;
-}
-
-static uint64_t qemu_rdma_make_wrid(uint64_t wr_id, uint64_t index,
-                                         uint64_t chunk)
-{
-    uint64_t result = wr_id & RDMA_WRID_TYPE_MASK;
-
-    result |= (index << RDMA_WRID_BLOCK_SHIFT);
-    result |= (chunk << RDMA_WRID_CHUNK_SHIFT);
-
-    return result;
-}
-
-/*
- * Consult the connection manager to see a work request
- * (of any kind) has completed.
- * Return the work request ID that completed.
- */
-static int qemu_rdma_poll(RDMAContext *rdma, struct ibv_cq *cq,
-                          uint64_t *wr_id_out, uint32_t *byte_len)
-{
-    int ret;
-    struct ibv_wc wc;
-    uint64_t wr_id;
-
-    ret = ibv_poll_cq(cq, 1, &wc);
-
-    if (!ret) {
-        *wr_id_out = RDMA_WRID_NONE;
-        return 0;
-    }
-
-    if (ret < 0) {
-        return -1;
-    }
-
-    wr_id = wc.wr_id & RDMA_WRID_TYPE_MASK;
-
-    if (wc.status != IBV_WC_SUCCESS) {
-        return -1;
-    }
-
-    if (rdma->control_ready_expected &&
-        (wr_id >= RDMA_WRID_RECV_CONTROL)) {
-        trace_qemu_rdma_poll_recv(wr_id - RDMA_WRID_RECV_CONTROL, wr_id,
-                                  rdma->nb_sent);
-        rdma->control_ready_expected = 0;
-    }
-
-    if (wr_id == RDMA_WRID_RDMA_WRITE) {
-        uint64_t chunk =
-            (wc.wr_id & RDMA_WRID_CHUNK_MASK) >> RDMA_WRID_CHUNK_SHIFT;
-        uint64_t index =
-            (wc.wr_id & RDMA_WRID_BLOCK_MASK) >> RDMA_WRID_BLOCK_SHIFT;
-        RDMALocalBlock *block = &(rdma->local_ram_blocks.block[index]);
-
-        trace_qemu_rdma_poll_write(wr_id, rdma->nb_sent,
-                                   index, chunk, block->local_host_addr,
-                                   (void *)(uintptr_t)block->remote_host_addr);
-
-        clear_bit(chunk, block->transit_bitmap);
-
-        if (rdma->nb_sent > 0) {
-            rdma->nb_sent--;
-        }
-    } else {
-        trace_qemu_rdma_poll_other(wr_id, rdma->nb_sent);
-    }
-
-    *wr_id_out = wc.wr_id;
-    if (byte_len) {
-        *byte_len = wc.byte_len;
-    }
-
-    return  0;
-}
-
-/* Wait for activity on the completion channel.
- * Returns 0 on success, none-0 on error.
- */
-static int qemu_rdma_wait_comp_channel(RDMAContext *rdma,
-                                       struct ibv_comp_channel *comp_channel)
-{
-    struct rdma_cm_event *cm_event;
-
-    /*
-     * Coroutine doesn't start until migration_fd_process_incoming()
-     * so don't yield unless we know we're running inside of a coroutine.
-     */
-    if (rdma->migration_started_on_destination &&
-        migration_incoming_get_current()->state == MIGRATION_STATUS_ACTIVE) {
-        yield_until_fd_readable(comp_channel->fd);
-    } else {
-        /* This is the source side, we're in a separate thread
-         * or destination prior to migration_fd_process_incoming()
-         * after postcopy, the destination also in a separate thread.
-         * we can't yield; so we have to poll the fd.
-         * But we need to be able to handle 'cancel' or an error
-         * without hanging forever.
-         */
-        while (!rdma->errored && !rdma->received_error) {
-            GPollFD pfds[2];
-            pfds[0].fd = comp_channel->fd;
-            pfds[0].events = G_IO_IN | G_IO_HUP | G_IO_ERR;
-            pfds[0].revents = 0;
-
-            pfds[1].fd = rdma->channel->fd;
-            pfds[1].events = G_IO_IN | G_IO_HUP | G_IO_ERR;
-            pfds[1].revents = 0;
-
-            /* 0.1s timeout, should be fine for a 'cancel' */
-            switch (qemu_poll_ns(pfds, 2, 100 * 1000 * 1000)) {
-            case 2:
-            case 1: /* fd active */
-                if (pfds[0].revents) {
-                    return 0;
-                }
-
-                if (pfds[1].revents) {
-                    if (rdma_get_cm_event(rdma->channel, &cm_event) < 0) {
-                        return -1;
-                    }
-
-                    if (cm_event->event == RDMA_CM_EVENT_DISCONNECTED ||
-                        cm_event->event == RDMA_CM_EVENT_DEVICE_REMOVAL) {
-                        rdma_ack_cm_event(cm_event);
-                        return -1;
-                    }
-                    rdma_ack_cm_event(cm_event);
-                }
-                break;
-
-            case 0: /* Timeout, go around again */
-                break;
-
-            default: /* Error of some type -
-                      * I don't trust errno from qemu_poll_ns
-                     */
-                return -1;
-            }
-
-            if (migrate_get_current()->state == MIGRATION_STATUS_CANCELLING) {
-                /* Bail out and let the cancellation happen */
-                return -1;
-            }
-        }
-    }
-
-    if (rdma->received_error) {
-        return -1;
-    }
-    return -rdma->errored;
-}
-
-static struct ibv_comp_channel *to_channel(RDMAContext *rdma, uint64_t wrid)
-{
-    return wrid < RDMA_WRID_RECV_CONTROL ? rdma->send_comp_channel :
-           rdma->recv_comp_channel;
-}
-
-static struct ibv_cq *to_cq(RDMAContext *rdma, uint64_t wrid)
-{
-    return wrid < RDMA_WRID_RECV_CONTROL ? rdma->send_cq : rdma->recv_cq;
-}
-
-/*
- * Block until the next work request has completed.
- *
- * First poll to see if a work request has already completed,
- * otherwise block.
- *
- * If we encounter completed work requests for IDs other than
- * the one we're interested in, then that's generally an error.
- *
- * The only exception is actual RDMA Write completions. These
- * completions only need to be recorded, but do not actually
- * need further processing.
- */
-static int qemu_rdma_block_for_wrid(RDMAContext *rdma,
-                                    uint64_t wrid_requested,
-                                    uint32_t *byte_len)
-{
-    int num_cq_events = 0, ret;
-    struct ibv_cq *cq;
-    void *cq_ctx;
-    uint64_t wr_id = RDMA_WRID_NONE, wr_id_in;
-    struct ibv_comp_channel *ch = to_channel(rdma, wrid_requested);
-    struct ibv_cq *poll_cq = to_cq(rdma, wrid_requested);
-
-    if (ibv_req_notify_cq(poll_cq, 0)) {
-        return -1;
-    }
-    /* poll cq first */
-    while (wr_id != wrid_requested) {
-        ret = qemu_rdma_poll(rdma, poll_cq, &wr_id_in, byte_len);
-        if (ret < 0) {
-            return -1;
-        }
-
-        wr_id = wr_id_in & RDMA_WRID_TYPE_MASK;
-
-        if (wr_id == RDMA_WRID_NONE) {
-            break;
-        }
-        if (wr_id != wrid_requested) {
-            trace_qemu_rdma_block_for_wrid_miss(wrid_requested, wr_id);
-        }
-    }
-
-    if (wr_id == wrid_requested) {
-        return 0;
-    }
-
-    while (1) {
-        ret = qemu_rdma_wait_comp_channel(rdma, ch);
-        if (ret < 0) {
-            goto err_block_for_wrid;
-        }
-
-        ret = ibv_get_cq_event(ch, &cq, &cq_ctx);
-        if (ret < 0) {
-            goto err_block_for_wrid;
-        }
-
-        num_cq_events++;
-
-        if (ibv_req_notify_cq(cq, 0)) {
-            goto err_block_for_wrid;
-        }
-
-        while (wr_id != wrid_requested) {
-            ret = qemu_rdma_poll(rdma, poll_cq, &wr_id_in, byte_len);
-            if (ret < 0) {
-                goto err_block_for_wrid;
-            }
-
-            wr_id = wr_id_in & RDMA_WRID_TYPE_MASK;
-
-            if (wr_id == RDMA_WRID_NONE) {
-                break;
-            }
-            if (wr_id != wrid_requested) {
-                trace_qemu_rdma_block_for_wrid_miss(wrid_requested, wr_id);
-            }
-        }
-
-        if (wr_id == wrid_requested) {
-            goto success_block_for_wrid;
-        }
-    }
-
-success_block_for_wrid:
-    if (num_cq_events) {
-        ibv_ack_cq_events(cq, num_cq_events);
-    }
-    return 0;
-
-err_block_for_wrid:
-    if (num_cq_events) {
-        ibv_ack_cq_events(cq, num_cq_events);
-    }
-
-    rdma->errored = true;
-    return -1;
-}
-
-/*
- * Post a SEND message work request for the control channel
- * containing some data and block until the post completes.
- */
-static int qemu_rdma_post_send_control(RDMAContext *rdma, uint8_t *buf,
-                                       RDMAControlHeader *head,
-                                       Error **errp)
-{
-    int ret;
-    RDMAWorkRequestData *wr = &rdma->wr_data[RDMA_WRID_CONTROL];
-    struct ibv_send_wr *bad_wr;
-    struct ibv_sge sge = {
-                           .addr = (uintptr_t)(wr->control),
-                           .length = head->len + sizeof(RDMAControlHeader),
-                           .lkey = wr->control_mr->lkey,
-                         };
-    struct ibv_send_wr send_wr = {
-                                   .wr_id = RDMA_WRID_SEND_CONTROL,
-                                   .opcode = IBV_WR_SEND,
-                                   .send_flags = IBV_SEND_SIGNALED,
-                                   .sg_list = &sge,
-                                   .num_sge = 1,
-                                };
-
-    trace_qemu_rdma_post_send_control(control_desc(head->type));
-
-    /*
-     * We don't actually need to do a memcpy() in here if we used
-     * the "sge" properly, but since we're only sending control messages
-     * (not RAM in a performance-critical path), then its OK for now.
-     *
-     * The copy makes the RDMAControlHeader simpler to manipulate
-     * for the time being.
-     */
-    assert(head->len <= RDMA_CONTROL_MAX_BUFFER - sizeof(*head));
-    memcpy(wr->control, head, sizeof(RDMAControlHeader));
-    control_to_network((void *) wr->control);
-
-    if (buf) {
-        memcpy(wr->control + sizeof(RDMAControlHeader), buf, head->len);
-    }
-
-
-    ret = ibv_post_send(rdma->qp, &send_wr, &bad_wr);
-
-    if (ret > 0) {
-        error_setg(errp, "Failed to use post IB SEND for control");
-        return -1;
-    }
-
-    ret = qemu_rdma_block_for_wrid(rdma, RDMA_WRID_SEND_CONTROL, NULL);
-    if (ret < 0) {
-        error_setg(errp, "rdma migration: send polling control error");
-        return -1;
-    }
-
-    return 0;
-}
-
-/*
- * Post a RECV work request in anticipation of some future receipt
- * of data on the control channel.
- */
-static int qemu_rdma_post_recv_control(RDMAContext *rdma, int idx,
-                                       Error **errp)
-{
-    struct ibv_recv_wr *bad_wr;
-    struct ibv_sge sge = {
-                            .addr = (uintptr_t)(rdma->wr_data[idx].control),
-                            .length = RDMA_CONTROL_MAX_BUFFER,
-                            .lkey = rdma->wr_data[idx].control_mr->lkey,
-                         };
-
-    struct ibv_recv_wr recv_wr = {
-                                    .wr_id = RDMA_WRID_RECV_CONTROL + idx,
-                                    .sg_list = &sge,
-                                    .num_sge = 1,
-                                 };
-
-
-    if (ibv_post_recv(rdma->qp, &recv_wr, &bad_wr)) {
-        error_setg(errp, "error posting control recv");
-        return -1;
-    }
-
-    return 0;
-}
-
-/*
- * Block and wait for a RECV control channel message to arrive.
- */
-static int qemu_rdma_exchange_get_response(RDMAContext *rdma,
-                RDMAControlHeader *head, uint32_t expecting, int idx,
-                Error **errp)
-{
-    uint32_t byte_len;
-    int ret = qemu_rdma_block_for_wrid(rdma, RDMA_WRID_RECV_CONTROL + idx,
-                                       &byte_len);
-
-    if (ret < 0) {
-        error_setg(errp, "rdma migration: recv polling control error!");
-        return -1;
-    }
-
-    network_to_control((void *) rdma->wr_data[idx].control);
-    memcpy(head, rdma->wr_data[idx].control, sizeof(RDMAControlHeader));
-
-    trace_qemu_rdma_exchange_get_response_start(control_desc(expecting));
-
-    if (expecting == RDMA_CONTROL_NONE) {
-        trace_qemu_rdma_exchange_get_response_none(control_desc(head->type),
-                                             head->type);
-    } else if (head->type != expecting || head->type == RDMA_CONTROL_ERROR) {
-        error_setg(errp, "Was expecting a %s (%d) control message"
-                ", but got: %s (%d), length: %d",
-                control_desc(expecting), expecting,
-                control_desc(head->type), head->type, head->len);
-        if (head->type == RDMA_CONTROL_ERROR) {
-            rdma->received_error = true;
-        }
-        return -1;
-    }
-    if (head->len > RDMA_CONTROL_MAX_BUFFER - sizeof(*head)) {
-        error_setg(errp, "too long length: %d", head->len);
-        return -1;
-    }
-    if (sizeof(*head) + head->len != byte_len) {
-        error_setg(errp, "Malformed length: %d byte_len %d",
-                   head->len, byte_len);
-        return -1;
-    }
-
-    return 0;
-}
-
-/*
- * When a RECV work request has completed, the work request's
- * buffer is pointed at the header.
- *
- * This will advance the pointer to the data portion
- * of the control message of the work request's buffer that
- * was populated after the work request finished.
- */
-static void qemu_rdma_move_header(RDMAContext *rdma, int idx,
-                                  RDMAControlHeader *head)
-{
-    rdma->wr_data[idx].control_len = head->len;
-    rdma->wr_data[idx].control_curr =
-        rdma->wr_data[idx].control + sizeof(RDMAControlHeader);
-}
-
-/*
- * This is an 'atomic' high-level operation to deliver a single, unified
- * control-channel message.
- *
- * Additionally, if the user is expecting some kind of reply to this message,
- * they can request a 'resp' response message be filled in by posting an
- * additional work request on behalf of the user and waiting for an additional
- * completion.
- *
- * The extra (optional) response is used during registration to us from having
- * to perform an *additional* exchange of message just to provide a response by
- * instead piggy-backing on the acknowledgement.
- */
-static int qemu_rdma_exchange_send(RDMAContext *rdma, RDMAControlHeader *head,
-                                   uint8_t *data, RDMAControlHeader *resp,
-                                   int *resp_idx,
-                                   int (*callback)(RDMAContext *rdma,
-                                                   Error **errp),
-                                   Error **errp)
-{
-    int ret;
-
-    /*
-     * Wait until the dest is ready before attempting to deliver the message
-     * by waiting for a READY message.
-     */
-    if (rdma->control_ready_expected) {
-        RDMAControlHeader resp_ignored;
-
-        ret = qemu_rdma_exchange_get_response(rdma, &resp_ignored,
-                                              RDMA_CONTROL_READY,
-                                              RDMA_WRID_READY, errp);
-        if (ret < 0) {
-            return -1;
-        }
-    }
-
-    /*
-     * If the user is expecting a response, post a WR in anticipation of it.
-     */
-    if (resp) {
-        ret = qemu_rdma_post_recv_control(rdma, RDMA_WRID_DATA, errp);
-        if (ret < 0) {
-            return -1;
-        }
-    }
-
-    /*
-     * Post a WR to replace the one we just consumed for the READY message.
-     */
-    ret = qemu_rdma_post_recv_control(rdma, RDMA_WRID_READY, errp);
-    if (ret < 0) {
-        return -1;
-    }
-
-    /*
-     * Deliver the control message that was requested.
-     */
-    ret = qemu_rdma_post_send_control(rdma, data, head, errp);
-
-    if (ret < 0) {
-        return -1;
-    }
-
-    /*
-     * If we're expecting a response, block and wait for it.
-     */
-    if (resp) {
-        if (callback) {
-            trace_qemu_rdma_exchange_send_issue_callback();
-            ret = callback(rdma, errp);
-            if (ret < 0) {
-                return -1;
-            }
-        }
-
-        trace_qemu_rdma_exchange_send_waiting(control_desc(resp->type));
-        ret = qemu_rdma_exchange_get_response(rdma, resp,
-                                              resp->type, RDMA_WRID_DATA,
-                                              errp);
-
-        if (ret < 0) {
-            return -1;
-        }
-
-        qemu_rdma_move_header(rdma, RDMA_WRID_DATA, resp);
-        if (resp_idx) {
-            *resp_idx = RDMA_WRID_DATA;
-        }
-        trace_qemu_rdma_exchange_send_received(control_desc(resp->type));
-    }
-
-    rdma->control_ready_expected = 1;
-
-    return 0;
-}
-
-/*
- * This is an 'atomic' high-level operation to receive a single, unified
- * control-channel message.
- */
-static int qemu_rdma_exchange_recv(RDMAContext *rdma, RDMAControlHeader *head,
-                                   uint32_t expecting, Error **errp)
-{
-    RDMAControlHeader ready = {
-                                .len = 0,
-                                .type = RDMA_CONTROL_READY,
-                                .repeat = 1,
-                              };
-    int ret;
-
-    /*
-     * Inform the source that we're ready to receive a message.
-     */
-    ret = qemu_rdma_post_send_control(rdma, NULL, &ready, errp);
-
-    if (ret < 0) {
-        return -1;
-    }
-
-    /*
-     * Block and wait for the message.
-     */
-    ret = qemu_rdma_exchange_get_response(rdma, head,
-                                          expecting, RDMA_WRID_READY, errp);
-
-    if (ret < 0) {
-        return -1;
-    }
-
-    qemu_rdma_move_header(rdma, RDMA_WRID_READY, head);
-
-    /*
-     * Post a new RECV work request to replace the one we just consumed.
-     */
-    ret = qemu_rdma_post_recv_control(rdma, RDMA_WRID_READY, errp);
-    if (ret < 0) {
-        return -1;
-    }
-
-    return 0;
-}
-
-/*
- * Write an actual chunk of memory using RDMA.
- *
- * If we're using dynamic registration on the dest-side, we have to
- * send a registration command first.
- */
-static int qemu_rdma_write_one(RDMAContext *rdma,
-                               int current_index, uint64_t current_addr,
-                               uint64_t length, Error **errp)
-{
-    struct ibv_sge sge;
-    struct ibv_send_wr send_wr = { 0 };
-    struct ibv_send_wr *bad_wr;
-    int reg_result_idx, ret, count = 0;
-    uint64_t chunk, chunks;
-    uint8_t *chunk_start, *chunk_end;
-    RDMALocalBlock *block = &(rdma->local_ram_blocks.block[current_index]);
-    RDMARegister reg;
-    RDMARegisterResult *reg_result;
-    RDMAControlHeader resp = { .type = RDMA_CONTROL_REGISTER_RESULT };
-    RDMAControlHeader head = { .len = sizeof(RDMARegister),
-                               .type = RDMA_CONTROL_REGISTER_REQUEST,
-                               .repeat = 1,
-                             };
-
-retry:
-    sge.addr = (uintptr_t)(block->local_host_addr +
-                            (current_addr - block->offset));
-    sge.length = length;
-
-    chunk = ram_chunk_index(block->local_host_addr,
-                            (uint8_t *)(uintptr_t)sge.addr);
-    chunk_start = ram_chunk_start(block, chunk);
-
-    if (block->is_ram_block) {
-        chunks = length / (1UL << RDMA_REG_CHUNK_SHIFT);
-
-        if (chunks && ((length % (1UL << RDMA_REG_CHUNK_SHIFT)) == 0)) {
-            chunks--;
-        }
-    } else {
-        chunks = block->length / (1UL << RDMA_REG_CHUNK_SHIFT);
-
-        if (chunks && ((block->length % (1UL << RDMA_REG_CHUNK_SHIFT)) == 0)) {
-            chunks--;
-        }
-    }
-
-    trace_qemu_rdma_write_one_top(chunks + 1,
-                                  (chunks + 1) *
-                                  (1UL << RDMA_REG_CHUNK_SHIFT) / 1024 / 1024);
-
-    chunk_end = ram_chunk_end(block, chunk + chunks);
-
-
-    while (test_bit(chunk, block->transit_bitmap)) {
-        (void)count;
-        trace_qemu_rdma_write_one_block(count++, current_index, chunk,
-                sge.addr, length, rdma->nb_sent, block->nb_chunks);
-
-        ret = qemu_rdma_block_for_wrid(rdma, RDMA_WRID_RDMA_WRITE, NULL);
-
-        if (ret < 0) {
-            error_setg(errp, "Failed to Wait for previous write to complete "
-                    "block %d chunk %" PRIu64
-                    " current %" PRIu64 " len %" PRIu64 " %d",
-                    current_index, chunk, sge.addr, length, rdma->nb_sent);
-            return -1;
-        }
-    }
-
-    if (!rdma->pin_all || !block->is_ram_block) {
-        if (!block->remote_keys[chunk]) {
-            /*
-             * This chunk has not yet been registered, so first check to see
-             * if the entire chunk is zero. If so, tell the other size to
-             * memset() + madvise() the entire chunk without RDMA.
-             */
-
-            if (buffer_is_zero((void *)(uintptr_t)sge.addr, length)) {
-                RDMACompress comp = {
-                                        .offset = current_addr,
-                                        .value = 0,
-                                        .block_idx = current_index,
-                                        .length = length,
-                                    };
-
-                head.len = sizeof(comp);
-                head.type = RDMA_CONTROL_COMPRESS;
-
-                trace_qemu_rdma_write_one_zero(chunk, sge.length,
-                                               current_index, current_addr);
-
-                compress_to_network(rdma, &comp);
-                ret = qemu_rdma_exchange_send(rdma, &head,
-                                (uint8_t *) &comp, NULL, NULL, NULL, errp);
-
-                if (ret < 0) {
-                    return -1;
-                }
-
-                /*
-                 * TODO: Here we are sending something, but we are not
-                 * accounting for anything transferred.  The following is wrong:
-                 *
-                 * stat64_add(&mig_stats.rdma_bytes, sge.length);
-                 *
-                 * because we are using some kind of compression.  I
-                 * would think that head.len would be the more similar
-                 * thing to a correct value.
-                 */
-                stat64_add(&mig_stats.zero_pages,
-                           sge.length / qemu_target_page_size());
-                return 1;
-            }
-
-            /*
-             * Otherwise, tell other side to register.
-             */
-            reg.current_index = current_index;
-            if (block->is_ram_block) {
-                reg.key.current_addr = current_addr;
-            } else {
-                reg.key.chunk = chunk;
-            }
-            reg.chunks = chunks;
-
-            trace_qemu_rdma_write_one_sendreg(chunk, sge.length, current_index,
-                                              current_addr);
-
-            register_to_network(rdma, &reg);
-            ret = qemu_rdma_exchange_send(rdma, &head, (uint8_t *) &reg,
-                                    &resp, &reg_result_idx, NULL, errp);
-            if (ret < 0) {
-                return -1;
-            }
-
-            /* try to overlap this single registration with the one we sent. */
-            if (qemu_rdma_register_and_get_keys(rdma, block, sge.addr,
-                                                &sge.lkey, NULL, chunk,
-                                                chunk_start, chunk_end)) {
-                error_setg(errp, "cannot get lkey");
-                return -1;
-            }
-
-            reg_result = (RDMARegisterResult *)
-                    rdma->wr_data[reg_result_idx].control_curr;
-
-            network_to_result(reg_result);
-
-            trace_qemu_rdma_write_one_recvregres(block->remote_keys[chunk],
-                                                 reg_result->rkey, chunk);
-
-            block->remote_keys[chunk] = reg_result->rkey;
-            block->remote_host_addr = reg_result->host_addr;
-        } else {
-            /* already registered before */
-            if (qemu_rdma_register_and_get_keys(rdma, block, sge.addr,
-                                                &sge.lkey, NULL, chunk,
-                                                chunk_start, chunk_end)) {
-                error_setg(errp, "cannot get lkey!");
-                return -1;
-            }
-        }
-
-        send_wr.wr.rdma.rkey = block->remote_keys[chunk];
-    } else {
-        send_wr.wr.rdma.rkey = block->remote_rkey;
-
-        if (qemu_rdma_register_and_get_keys(rdma, block, sge.addr,
-                                                     &sge.lkey, NULL, chunk,
-                                                     chunk_start, chunk_end)) {
-            error_setg(errp, "cannot get lkey!");
-            return -1;
-        }
-    }
-
-    /*
-     * Encode the ram block index and chunk within this wrid.
-     * We will use this information at the time of completion
-     * to figure out which bitmap to check against and then which
-     * chunk in the bitmap to look for.
-     */
-    send_wr.wr_id = qemu_rdma_make_wrid(RDMA_WRID_RDMA_WRITE,
-                                        current_index, chunk);
-
-    send_wr.opcode = IBV_WR_RDMA_WRITE;
-    send_wr.send_flags = IBV_SEND_SIGNALED;
-    send_wr.sg_list = &sge;
-    send_wr.num_sge = 1;
-    send_wr.wr.rdma.remote_addr = block->remote_host_addr +
-                                (current_addr - block->offset);
-
-    trace_qemu_rdma_write_one_post(chunk, sge.addr, send_wr.wr.rdma.remote_addr,
-                                   sge.length);
-
-    /*
-     * ibv_post_send() does not return negative error numbers,
-     * per the specification they are positive - no idea why.
-     */
-    ret = ibv_post_send(rdma->qp, &send_wr, &bad_wr);
-
-    if (ret == ENOMEM) {
-        trace_qemu_rdma_write_one_queue_full();
-        ret = qemu_rdma_block_for_wrid(rdma, RDMA_WRID_RDMA_WRITE, NULL);
-        if (ret < 0) {
-            error_setg(errp, "rdma migration: failed to make "
-                         "room in full send queue!");
-            return -1;
-        }
-
-        goto retry;
-
-    } else if (ret > 0) {
-        error_setg_errno(errp, ret,
-                         "rdma migration: post rdma write failed");
-        return -1;
-    }
-
-    set_bit(chunk, block->transit_bitmap);
-    stat64_add(&mig_stats.normal_pages, sge.length / qemu_target_page_size());
-    /*
-     * We are adding to transferred the amount of data written, but no
-     * overhead at all.  I will assume that RDMA is magicaly and don't
-     * need to transfer (at least) the addresses where it wants to
-     * write the pages.  Here it looks like it should be something
-     * like:
-     *     sizeof(send_wr) + sge.length
-     * but this being RDMA, who knows.
-     */
-    stat64_add(&mig_stats.rdma_bytes, sge.length);
-    ram_transferred_add(sge.length);
-    rdma->total_writes++;
-
-    return 0;
-}
-
-/*
- * Push out any unwritten RDMA operations.
- *
- * We support sending out multiple chunks at the same time.
- * Not all of them need to get signaled in the completion queue.
- */
-static int qemu_rdma_write_flush(RDMAContext *rdma, Error **errp)
-{
-    int ret;
-
-    if (!rdma->current_length) {
-        return 0;
-    }
-
-    ret = qemu_rdma_write_one(rdma, rdma->current_index, rdma->current_addr,
-                              rdma->current_length, errp);
-
-    if (ret < 0) {
-        return -1;
-    }
-
-    if (ret == 0) {
-        rdma->nb_sent++;
-        trace_qemu_rdma_write_flush(rdma->nb_sent);
-    }
-
-    rdma->current_length = 0;
-    rdma->current_addr = 0;
-
-    return 0;
-}
-
-static inline bool qemu_rdma_buffer_mergeable(RDMAContext *rdma,
-                    uint64_t offset, uint64_t len)
-{
-    RDMALocalBlock *block;
-    uint8_t *host_addr;
-    uint8_t *chunk_end;
-
-    if (rdma->current_index < 0) {
-        return false;
-    }
-
-    if (rdma->current_chunk < 0) {
-        return false;
-    }
-
-    block = &(rdma->local_ram_blocks.block[rdma->current_index]);
-    host_addr = block->local_host_addr + (offset - block->offset);
-    chunk_end = ram_chunk_end(block, rdma->current_chunk);
-
-    if (rdma->current_length == 0) {
-        return false;
-    }
-
-    /*
-     * Only merge into chunk sequentially.
-     */
-    if (offset != (rdma->current_addr + rdma->current_length)) {
-        return false;
-    }
-
-    if (offset < block->offset) {
-        return false;
-    }
-
-    if ((offset + len) > (block->offset + block->length)) {
-        return false;
-    }
-
-    if ((host_addr + len) > chunk_end) {
-        return false;
-    }
-
-    return true;
-}
-
-/*
- * We're not actually writing here, but doing three things:
- *
- * 1. Identify the chunk the buffer belongs to.
- * 2. If the chunk is full or the buffer doesn't belong to the current
- *    chunk, then start a new chunk and flush() the old chunk.
- * 3. To keep the hardware busy, we also group chunks into batches
- *    and only require that a batch gets acknowledged in the completion
- *    queue instead of each individual chunk.
- */
-static int qemu_rdma_write(RDMAContext *rdma,
-                           uint64_t block_offset, uint64_t offset,
-                           uint64_t len, Error **errp)
-{
-    uint64_t current_addr = block_offset + offset;
-    uint64_t index = rdma->current_index;
-    uint64_t chunk = rdma->current_chunk;
-
-    /* If we cannot merge it, we flush the current buffer first. */
-    if (!qemu_rdma_buffer_mergeable(rdma, current_addr, len)) {
-        if (qemu_rdma_write_flush(rdma, errp) < 0) {
-            return -1;
-        }
-        rdma->current_length = 0;
-        rdma->current_addr = current_addr;
-
-        qemu_rdma_search_ram_block(rdma, block_offset,
-                                   offset, len, &index, &chunk);
-        rdma->current_index = index;
-        rdma->current_chunk = chunk;
-    }
-
-    /* merge it */
-    rdma->current_length += len;
-
-    /* flush it if buffer is too large */
-    if (rdma->current_length >= RDMA_MERGE_MAX) {
-        return qemu_rdma_write_flush(rdma, errp);
-    }
-
-    return 0;
-}
-
-static void qemu_rdma_cleanup(RDMAContext *rdma)
-{
-    Error *err = NULL;
-
-    if (rdma->cm_id && rdma->connected) {
-        if ((rdma->errored ||
-             migrate_get_current()->state == MIGRATION_STATUS_CANCELLING) &&
-            !rdma->received_error) {
-            RDMAControlHeader head = { .len = 0,
-                                       .type = RDMA_CONTROL_ERROR,
-                                       .repeat = 1,
-                                     };
-            warn_report("Early error. Sending error.");
-            if (qemu_rdma_post_send_control(rdma, NULL, &head, &err) < 0) {
-                warn_report_err(err);
-            }
-        }
-
-        rdma_disconnect(rdma->cm_id);
-        trace_qemu_rdma_cleanup_disconnect();
-        rdma->connected = false;
-    }
-
-    if (rdma->channel) {
-        qemu_set_fd_handler(rdma->channel->fd, NULL, NULL, NULL);
-    }
-    g_free(rdma->dest_blocks);
-    rdma->dest_blocks = NULL;
-
-    for (int i = 0; i < RDMA_WRID_MAX; i++) {
-        if (rdma->wr_data[i].control_mr) {
-            rdma->total_registrations--;
-            ibv_dereg_mr(rdma->wr_data[i].control_mr);
-        }
-        rdma->wr_data[i].control_mr = NULL;
-    }
-
-    if (rdma->local_ram_blocks.block) {
-        while (rdma->local_ram_blocks.nb_blocks) {
-            rdma_delete_block(rdma, &rdma->local_ram_blocks.block[0]);
-        }
-    }
-
-    if (rdma->qp) {
-        rdma_destroy_qp(rdma->cm_id);
-        rdma->qp = NULL;
-    }
-    if (rdma->recv_cq) {
-        ibv_destroy_cq(rdma->recv_cq);
-        rdma->recv_cq = NULL;
-    }
-    if (rdma->send_cq) {
-        ibv_destroy_cq(rdma->send_cq);
-        rdma->send_cq = NULL;
-    }
-    if (rdma->recv_comp_channel) {
-        ibv_destroy_comp_channel(rdma->recv_comp_channel);
-        rdma->recv_comp_channel = NULL;
-    }
-    if (rdma->send_comp_channel) {
-        ibv_destroy_comp_channel(rdma->send_comp_channel);
-        rdma->send_comp_channel = NULL;
-    }
-    if (rdma->pd) {
-        ibv_dealloc_pd(rdma->pd);
-        rdma->pd = NULL;
-    }
-    if (rdma->cm_id) {
-        rdma_destroy_id(rdma->cm_id);
-        rdma->cm_id = NULL;
-    }
-
-    /* the destination side, listen_id and channel is shared */
-    if (rdma->listen_id) {
-        if (!rdma->is_return_path) {
-            rdma_destroy_id(rdma->listen_id);
-        }
-        rdma->listen_id = NULL;
-
-        if (rdma->channel) {
-            if (!rdma->is_return_path) {
-                rdma_destroy_event_channel(rdma->channel);
-            }
-            rdma->channel = NULL;
-        }
-    }
-
-    if (rdma->channel) {
-        rdma_destroy_event_channel(rdma->channel);
-        rdma->channel = NULL;
-    }
-    g_free(rdma->host);
-    rdma->host = NULL;
-}
-
-
-static int qemu_rdma_source_init(RDMAContext *rdma, bool pin_all, Error **errp)
-{
-    int ret;
-
-    /*
-     * Will be validated against destination's actual capabilities
-     * after the connect() completes.
-     */
-    rdma->pin_all = pin_all;
-
-    ret = qemu_rdma_resolve_host(rdma, errp);
-    if (ret < 0) {
-        goto err_rdma_source_init;
-    }
-
-    ret = qemu_rdma_alloc_pd_cq(rdma, errp);
-    if (ret < 0) {
-        goto err_rdma_source_init;
-    }
-
-    ret = qemu_rdma_alloc_qp(rdma);
-    if (ret < 0) {
-        error_setg(errp, "RDMA ERROR: rdma migration: error allocating qp!");
-        goto err_rdma_source_init;
-    }
-
-    qemu_rdma_init_ram_blocks(rdma);
-
-    /* Build the hash that maps from offset to RAMBlock */
-    rdma->blockmap = g_hash_table_new(g_direct_hash, g_direct_equal);
-    for (int i = 0; i < rdma->local_ram_blocks.nb_blocks; i++) {
-        g_hash_table_insert(rdma->blockmap,
-                (void *)(uintptr_t)rdma->local_ram_blocks.block[i].offset,
-                &rdma->local_ram_blocks.block[i]);
-    }
-
-    for (int i = 0; i < RDMA_WRID_MAX; i++) {
-        ret = qemu_rdma_reg_control(rdma, i);
-        if (ret < 0) {
-            error_setg(errp, "RDMA ERROR: rdma migration: error "
-                       "registering %d control!", i);
-            goto err_rdma_source_init;
-        }
-    }
-
-    return 0;
-
-err_rdma_source_init:
-    qemu_rdma_cleanup(rdma);
-    return -1;
-}
-
-static int qemu_get_cm_event_timeout(RDMAContext *rdma,
-                                     struct rdma_cm_event **cm_event,
-                                     long msec, Error **errp)
-{
-    int ret;
-    struct pollfd poll_fd = {
-                                .fd = rdma->channel->fd,
-                                .events = POLLIN,
-                                .revents = 0
-                            };
-
-    do {
-        ret = poll(&poll_fd, 1, msec);
-    } while (ret < 0 && errno == EINTR);
-
-    if (ret == 0) {
-        error_setg(errp, "RDMA ERROR: poll cm event timeout");
-        return -1;
-    } else if (ret < 0) {
-        error_setg(errp, "RDMA ERROR: failed to poll cm event, errno=%i",
-                   errno);
-        return -1;
-    } else if (poll_fd.revents & POLLIN) {
-        if (rdma_get_cm_event(rdma->channel, cm_event) < 0) {
-            error_setg(errp, "RDMA ERROR: failed to get cm event");
-            return -1;
-        }
-        return 0;
-    } else {
-        error_setg(errp, "RDMA ERROR: no POLLIN event, revent=%x",
-                   poll_fd.revents);
-        return -1;
-    }
-}
-
-static int qemu_rdma_connect(RDMAContext *rdma, bool return_path,
-                             Error **errp)
-{
-    RDMACapabilities cap = {
-                                .version = RDMA_CONTROL_VERSION_CURRENT,
-                                .flags = 0,
-                           };
-    struct rdma_conn_param conn_param = { .initiator_depth = 2,
-                                          .retry_count = 5,
-                                          .private_data = &cap,
-                                          .private_data_len = sizeof(cap),
-                                        };
-    struct rdma_cm_event *cm_event;
-    int ret;
-
-    /*
-     * Only negotiate the capability with destination if the user
-     * on the source first requested the capability.
-     */
-    if (rdma->pin_all) {
-        trace_qemu_rdma_connect_pin_all_requested();
-        cap.flags |= RDMA_CAPABILITY_PIN_ALL;
-    }
-
-    caps_to_network(&cap);
-
-    ret = qemu_rdma_post_recv_control(rdma, RDMA_WRID_READY, errp);
-    if (ret < 0) {
-        goto err_rdma_source_connect;
-    }
-
-    ret = rdma_connect(rdma->cm_id, &conn_param);
-    if (ret < 0) {
-        error_setg_errno(errp, errno,
-                         "RDMA ERROR: connecting to destination!");
-        goto err_rdma_source_connect;
-    }
-
-    if (return_path) {
-        ret = qemu_get_cm_event_timeout(rdma, &cm_event, 5000, errp);
-    } else {
-        ret = rdma_get_cm_event(rdma->channel, &cm_event);
-        if (ret < 0) {
-            error_setg_errno(errp, errno,
-                             "RDMA ERROR: failed to get cm event");
-        }
-    }
-    if (ret < 0) {
-        goto err_rdma_source_connect;
-    }
-
-    if (cm_event->event != RDMA_CM_EVENT_ESTABLISHED) {
-        error_setg(errp, "RDMA ERROR: connecting to destination!");
-        rdma_ack_cm_event(cm_event);
-        goto err_rdma_source_connect;
-    }
-    rdma->connected = true;
-
-    memcpy(&cap, cm_event->param.conn.private_data, sizeof(cap));
-    network_to_caps(&cap);
-
-    /*
-     * Verify that the *requested* capabilities are supported by the destination
-     * and disable them otherwise.
-     */
-    if (rdma->pin_all && !(cap.flags & RDMA_CAPABILITY_PIN_ALL)) {
-        warn_report("RDMA: Server cannot support pinning all memory. "
-                    "Will register memory dynamically.");
-        rdma->pin_all = false;
-    }
-
-    trace_qemu_rdma_connect_pin_all_outcome(rdma->pin_all);
-
-    rdma_ack_cm_event(cm_event);
-
-    rdma->control_ready_expected = 1;
-    rdma->nb_sent = 0;
-    return 0;
-
-err_rdma_source_connect:
-    qemu_rdma_cleanup(rdma);
-    return -1;
-}
-
-static int qemu_rdma_dest_init(RDMAContext *rdma, Error **errp)
-{
-    Error *err = NULL;
-    int ret;
-    struct rdma_cm_id *listen_id;
-    char ip[40] = "unknown";
-    struct rdma_addrinfo *res, *e;
-    char port_str[16];
-    int reuse = 1;
-
-    for (int i = 0; i < RDMA_WRID_MAX; i++) {
-        rdma->wr_data[i].control_len = 0;
-        rdma->wr_data[i].control_curr = NULL;
-    }
-
-    if (!rdma->host || !rdma->host[0]) {
-        error_setg(errp, "RDMA ERROR: RDMA host is not set!");
-        rdma->errored = true;
-        return -1;
-    }
-    /* create CM channel */
-    rdma->channel = rdma_create_event_channel();
-    if (!rdma->channel) {
-        error_setg(errp, "RDMA ERROR: could not create rdma event channel");
-        rdma->errored = true;
-        return -1;
-    }
-
-    /* create CM id */
-    ret = rdma_create_id(rdma->channel, &listen_id, NULL, RDMA_PS_TCP);
-    if (ret < 0) {
-        error_setg(errp, "RDMA ERROR: could not create cm_id!");
-        goto err_dest_init_create_listen_id;
-    }
-
-    snprintf(port_str, 16, "%d", rdma->port);
-    port_str[15] = '\0';
-
-    ret = rdma_getaddrinfo(rdma->host, port_str, NULL, &res);
-    if (ret) {
-        error_setg(errp, "RDMA ERROR: could not rdma_getaddrinfo address %s",
-                   rdma->host);
-        goto err_dest_init_bind_addr;
-    }
-
-    ret = rdma_set_option(listen_id, RDMA_OPTION_ID, RDMA_OPTION_ID_REUSEADDR,
-                          &reuse, sizeof reuse);
-    if (ret < 0) {
-        error_setg(errp, "RDMA ERROR: Error: could not set REUSEADDR option");
-        goto err_dest_init_bind_addr;
-    }
-
-    /* Try all addresses, saving the first error in @err */
-    for (e = res; e != NULL; e = e->ai_next) {
-        Error **local_errp = err ? NULL : &err;
-
-        inet_ntop(e->ai_family,
-            &((struct sockaddr_in *) e->ai_dst_addr)->sin_addr, ip, sizeof ip);
-        trace_qemu_rdma_dest_init_trying(rdma->host, ip);
-        ret = rdma_bind_addr(listen_id, e->ai_dst_addr);
-        if (ret < 0) {
-            continue;
-        }
-        if (e->ai_family == AF_INET6) {
-            ret = qemu_rdma_broken_ipv6_kernel(listen_id->verbs,
-                                               local_errp);
-            if (ret < 0) {
-                continue;
-            }
-        }
-        error_free(err);
-        break;
-    }
-
-    rdma_freeaddrinfo(res);
-    if (!e) {
-        if (err) {
-            error_propagate(errp, err);
-        } else {
-            error_setg(errp, "RDMA ERROR: Error: could not rdma_bind_addr!");
-        }
-        goto err_dest_init_bind_addr;
-    }
-
-    rdma->listen_id = listen_id;
-    qemu_rdma_dump_gid("dest_init", listen_id);
-    return 0;
-
-err_dest_init_bind_addr:
-    rdma_destroy_id(listen_id);
-err_dest_init_create_listen_id:
-    rdma_destroy_event_channel(rdma->channel);
-    rdma->channel = NULL;
-    rdma->errored = true;
-    return -1;
-
-}
-
-static void qemu_rdma_return_path_dest_init(RDMAContext *rdma_return_path,
-                                            RDMAContext *rdma)
-{
-    for (int i = 0; i < RDMA_WRID_MAX; i++) {
-        rdma_return_path->wr_data[i].control_len = 0;
-        rdma_return_path->wr_data[i].control_curr = NULL;
-    }
-
-    /*the CM channel and CM id is shared*/
-    rdma_return_path->channel = rdma->channel;
-    rdma_return_path->listen_id = rdma->listen_id;
-
-    rdma->return_path = rdma_return_path;
-    rdma_return_path->return_path = rdma;
-    rdma_return_path->is_return_path = true;
-}
-
-static RDMAContext *qemu_rdma_data_init(InetSocketAddress *saddr, Error **errp)
-{
-    RDMAContext *rdma = NULL;
-
-    rdma = g_new0(RDMAContext, 1);
-    rdma->current_index = -1;
-    rdma->current_chunk = -1;
-
-    rdma->host = g_strdup(saddr->host);
-    rdma->port = atoi(saddr->port);
-    return rdma;
-}
-
-/*
- * QEMUFile interface to the control channel.
- * SEND messages for control only.
- * VM's ram is handled with regular RDMA messages.
- */
-static ssize_t qio_channel_rdma_writev(QIOChannel *ioc,
-                                       const struct iovec *iov,
-                                       size_t niov,
-                                       int *fds,
-                                       size_t nfds,
-                                       int flags,
-                                       Error **errp)
-{
-    QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(ioc);
-    RDMAContext *rdma;
-    int ret;
-    ssize_t done = 0;
-    size_t len;
-
-    RCU_READ_LOCK_GUARD();
-    rdma = qatomic_rcu_read(&rioc->rdmaout);
-
-    if (!rdma) {
-        error_setg(errp, "RDMA control channel output is not set");
-        return -1;
-    }
-
-    if (rdma->errored) {
-        error_setg(errp,
-                   "RDMA is in an error state waiting migration to abort!");
-        return -1;
-    }
-
-    /*
-     * Push out any writes that
-     * we're queued up for VM's ram.
-     */
-    ret = qemu_rdma_write_flush(rdma, errp);
-    if (ret < 0) {
-        rdma->errored = true;
-        return -1;
-    }
-
-    for (int i = 0; i < niov; i++) {
-        size_t remaining = iov[i].iov_len;
-        uint8_t * data = (void *)iov[i].iov_base;
-        while (remaining) {
-            RDMAControlHeader head = {};
-
-            len = MIN(remaining, RDMA_SEND_INCREMENT);
-            remaining -= len;
-
-            head.len = len;
-            head.type = RDMA_CONTROL_QEMU_FILE;
-
-            ret = qemu_rdma_exchange_send(rdma, &head,
-                                          data, NULL, NULL, NULL, errp);
-
-            if (ret < 0) {
-                rdma->errored = true;
-                return -1;
-            }
-
-            data += len;
-            done += len;
-        }
-    }
-
-    return done;
-}
-
-static size_t qemu_rdma_fill(RDMAContext *rdma, uint8_t *buf,
-                             size_t size, int idx)
-{
-    size_t len = 0;
-
-    if (rdma->wr_data[idx].control_len) {
-        trace_qemu_rdma_fill(rdma->wr_data[idx].control_len, size);
-
-        len = MIN(size, rdma->wr_data[idx].control_len);
-        memcpy(buf, rdma->wr_data[idx].control_curr, len);
-        rdma->wr_data[idx].control_curr += len;
-        rdma->wr_data[idx].control_len -= len;
-    }
-
-    return len;
-}
-
-/*
- * QEMUFile interface to the control channel.
- * RDMA links don't use bytestreams, so we have to
- * return bytes to QEMUFile opportunistically.
- */
-static ssize_t qio_channel_rdma_readv(QIOChannel *ioc,
-                                      const struct iovec *iov,
-                                      size_t niov,
-                                      int **fds,
-                                      size_t *nfds,
-                                      int flags,
-                                      Error **errp)
-{
-    QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(ioc);
-    RDMAContext *rdma;
-    RDMAControlHeader head;
-    int ret;
-    ssize_t done = 0;
-    size_t len;
-
-    RCU_READ_LOCK_GUARD();
-    rdma = qatomic_rcu_read(&rioc->rdmain);
-
-    if (!rdma) {
-        error_setg(errp, "RDMA control channel input is not set");
-        return -1;
-    }
-
-    if (rdma->errored) {
-        error_setg(errp,
-                   "RDMA is in an error state waiting migration to abort!");
-        return -1;
-    }
-
-    for (int i = 0; i < niov; i++) {
-        size_t want = iov[i].iov_len;
-        uint8_t *data = (void *)iov[i].iov_base;
-
-        /*
-         * First, we hold on to the last SEND message we
-         * were given and dish out the bytes until we run
-         * out of bytes.
-         */
-        len = qemu_rdma_fill(rdma, data, want, 0);
-        done += len;
-        want -= len;
-        /* Got what we needed, so go to next iovec */
-        if (want == 0) {
-            continue;
-        }
-
-        /* If we got any data so far, then don't wait
-         * for more, just return what we have */
-        if (done > 0) {
-            break;
-        }
-
-
-        /* We've got nothing at all, so lets wait for
-         * more to arrive
-         */
-        ret = qemu_rdma_exchange_recv(rdma, &head, RDMA_CONTROL_QEMU_FILE,
-                                      errp);
-
-        if (ret < 0) {
-            rdma->errored = true;
-            return -1;
-        }
-
-        /*
-         * SEND was received with new bytes, now try again.
-         */
-        len = qemu_rdma_fill(rdma, data, want, 0);
-        done += len;
-        want -= len;
-
-        /* Still didn't get enough, so lets just return */
-        if (want) {
-            if (done == 0) {
-                return QIO_CHANNEL_ERR_BLOCK;
-            } else {
-                break;
-            }
-        }
-    }
-    return done;
-}
-
-/*
- * Block until all the outstanding chunks have been delivered by the hardware.
- */
-static int qemu_rdma_drain_cq(RDMAContext *rdma)
-{
-    Error *err = NULL;
-
-    if (qemu_rdma_write_flush(rdma, &err) < 0) {
-        error_report_err(err);
-        return -1;
-    }
-
-    while (rdma->nb_sent) {
-        if (qemu_rdma_block_for_wrid(rdma, RDMA_WRID_RDMA_WRITE, NULL) < 0) {
-            error_report("rdma migration: complete polling error!");
-            return -1;
-        }
-    }
-
-    qemu_rdma_unregister_waiting(rdma);
-
-    return 0;
-}
-
-
-static int qio_channel_rdma_set_blocking(QIOChannel *ioc,
-                                         bool blocking,
-                                         Error **errp)
-{
-    QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(ioc);
-    /* XXX we should make readv/writev actually honour this :-) */
-    rioc->blocking = blocking;
-    return 0;
-}
-
-
-typedef struct QIOChannelRDMASource QIOChannelRDMASource;
-struct QIOChannelRDMASource {
-    GSource parent;
-    QIOChannelRDMA *rioc;
-    GIOCondition condition;
-};
-
-static gboolean
-qio_channel_rdma_source_prepare(GSource *source,
-                                gint *timeout)
-{
-    QIOChannelRDMASource *rsource = (QIOChannelRDMASource *)source;
-    RDMAContext *rdma;
-    GIOCondition cond = 0;
-    *timeout = -1;
-
-    RCU_READ_LOCK_GUARD();
-    if (rsource->condition == G_IO_IN) {
-        rdma = qatomic_rcu_read(&rsource->rioc->rdmain);
-    } else {
-        rdma = qatomic_rcu_read(&rsource->rioc->rdmaout);
-    }
-
-    if (!rdma) {
-        error_report("RDMAContext is NULL when prepare Gsource");
-        return FALSE;
-    }
-
-    if (rdma->wr_data[0].control_len) {
-        cond |= G_IO_IN;
-    }
-    cond |= G_IO_OUT;
-
-    return cond & rsource->condition;
-}
-
-static gboolean
-qio_channel_rdma_source_check(GSource *source)
-{
-    QIOChannelRDMASource *rsource = (QIOChannelRDMASource *)source;
-    RDMAContext *rdma;
-    GIOCondition cond = 0;
-
-    RCU_READ_LOCK_GUARD();
-    if (rsource->condition == G_IO_IN) {
-        rdma = qatomic_rcu_read(&rsource->rioc->rdmain);
-    } else {
-        rdma = qatomic_rcu_read(&rsource->rioc->rdmaout);
-    }
-
-    if (!rdma) {
-        error_report("RDMAContext is NULL when check Gsource");
-        return FALSE;
-    }
-
-    if (rdma->wr_data[0].control_len) {
-        cond |= G_IO_IN;
-    }
-    cond |= G_IO_OUT;
-
-    return cond & rsource->condition;
-}
-
-static gboolean
-qio_channel_rdma_source_dispatch(GSource *source,
-                                 GSourceFunc callback,
-                                 gpointer user_data)
-{
-    QIOChannelFunc func = (QIOChannelFunc)callback;
-    QIOChannelRDMASource *rsource = (QIOChannelRDMASource *)source;
-    RDMAContext *rdma;
-    GIOCondition cond = 0;
-
-    RCU_READ_LOCK_GUARD();
-    if (rsource->condition == G_IO_IN) {
-        rdma = qatomic_rcu_read(&rsource->rioc->rdmain);
-    } else {
-        rdma = qatomic_rcu_read(&rsource->rioc->rdmaout);
-    }
-
-    if (!rdma) {
-        error_report("RDMAContext is NULL when dispatch Gsource");
-        return FALSE;
-    }
-
-    if (rdma->wr_data[0].control_len) {
-        cond |= G_IO_IN;
-    }
-    cond |= G_IO_OUT;
-
-    return (*func)(QIO_CHANNEL(rsource->rioc),
-                   (cond & rsource->condition),
-                   user_data);
-}
-
-static void
-qio_channel_rdma_source_finalize(GSource *source)
-{
-    QIOChannelRDMASource *ssource = (QIOChannelRDMASource *)source;
-
-    object_unref(OBJECT(ssource->rioc));
-}
-
-static GSourceFuncs qio_channel_rdma_source_funcs = {
-    qio_channel_rdma_source_prepare,
-    qio_channel_rdma_source_check,
-    qio_channel_rdma_source_dispatch,
-    qio_channel_rdma_source_finalize
-};
-
-static GSource *qio_channel_rdma_create_watch(QIOChannel *ioc,
-                                              GIOCondition condition)
-{
-    QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(ioc);
-    QIOChannelRDMASource *ssource;
-    GSource *source;
-
-    source = g_source_new(&qio_channel_rdma_source_funcs,
-                          sizeof(QIOChannelRDMASource));
-    ssource = (QIOChannelRDMASource *)source;
-
-    ssource->rioc = rioc;
-    object_ref(OBJECT(rioc));
-
-    ssource->condition = condition;
-
-    return source;
-}
-
-static void qio_channel_rdma_set_aio_fd_handler(QIOChannel *ioc,
-                                                AioContext *read_ctx,
-                                                IOHandler *io_read,
-                                                AioContext *write_ctx,
-                                                IOHandler *io_write,
-                                                void *opaque)
-{
-    QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(ioc);
-    if (io_read) {
-        aio_set_fd_handler(read_ctx, rioc->rdmain->recv_comp_channel->fd,
-                           io_read, io_write, NULL, NULL, opaque);
-        aio_set_fd_handler(read_ctx, rioc->rdmain->send_comp_channel->fd,
-                           io_read, io_write, NULL, NULL, opaque);
-    } else {
-        aio_set_fd_handler(write_ctx, rioc->rdmaout->recv_comp_channel->fd,
-                           io_read, io_write, NULL, NULL, opaque);
-        aio_set_fd_handler(write_ctx, rioc->rdmaout->send_comp_channel->fd,
-                           io_read, io_write, NULL, NULL, opaque);
-    }
-}
-
-struct rdma_close_rcu {
-    struct rcu_head rcu;
-    RDMAContext *rdmain;
-    RDMAContext *rdmaout;
-};
-
-/* callback from qio_channel_rdma_close via call_rcu */
-static void qio_channel_rdma_close_rcu(struct rdma_close_rcu *rcu)
-{
-    if (rcu->rdmain) {
-        qemu_rdma_cleanup(rcu->rdmain);
-    }
-
-    if (rcu->rdmaout) {
-        qemu_rdma_cleanup(rcu->rdmaout);
-    }
-
-    g_free(rcu->rdmain);
-    g_free(rcu->rdmaout);
-    g_free(rcu);
-}
-
-static int qio_channel_rdma_close(QIOChannel *ioc,
-                                  Error **errp)
-{
-    QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(ioc);
-    RDMAContext *rdmain, *rdmaout;
-    struct rdma_close_rcu *rcu = g_new(struct rdma_close_rcu, 1);
-
-    trace_qemu_rdma_close();
-
-    rdmain = rioc->rdmain;
-    if (rdmain) {
-        qatomic_rcu_set(&rioc->rdmain, NULL);
-    }
-
-    rdmaout = rioc->rdmaout;
-    if (rdmaout) {
-        qatomic_rcu_set(&rioc->rdmaout, NULL);
-    }
-
-    rcu->rdmain = rdmain;
-    rcu->rdmaout = rdmaout;
-    call_rcu(rcu, qio_channel_rdma_close_rcu, rcu);
-
-    return 0;
-}
-
-static int
-qio_channel_rdma_shutdown(QIOChannel *ioc,
-                            QIOChannelShutdown how,
-                            Error **errp)
-{
-    QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(ioc);
-    RDMAContext *rdmain, *rdmaout;
-
-    RCU_READ_LOCK_GUARD();
-
-    rdmain = qatomic_rcu_read(&rioc->rdmain);
-    rdmaout = qatomic_rcu_read(&rioc->rdmain);
-
-    switch (how) {
-    case QIO_CHANNEL_SHUTDOWN_READ:
-        if (rdmain) {
-            rdmain->errored = true;
-        }
-        break;
-    case QIO_CHANNEL_SHUTDOWN_WRITE:
-        if (rdmaout) {
-            rdmaout->errored = true;
-        }
-        break;
-    case QIO_CHANNEL_SHUTDOWN_BOTH:
-    default:
-        if (rdmain) {
-            rdmain->errored = true;
-        }
-        if (rdmaout) {
-            rdmaout->errored = true;
-        }
-        break;
-    }
-
-    return 0;
-}
-
-/*
- * Parameters:
- *    @offset == 0 :
- *        This means that 'block_offset' is a full virtual address that does not
- *        belong to a RAMBlock of the virtual machine and instead
- *        represents a private malloc'd memory area that the caller wishes to
- *        transfer.
- *
- *    @offset != 0 :
- *        Offset is an offset to be added to block_offset and used
- *        to also lookup the corresponding RAMBlock.
- *
- *    @size : Number of bytes to transfer
- *
- *    @pages_sent : User-specificed pointer to indicate how many pages were
- *                  sent. Usually, this will not be more than a few bytes of
- *                  the protocol because most transfers are sent asynchronously.
- */
-static int qemu_rdma_save_page(QEMUFile *f, ram_addr_t block_offset,
-                               ram_addr_t offset, size_t size)
-{
-    QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(qemu_file_get_ioc(f));
-    Error *err = NULL;
-    RDMAContext *rdma;
-    int ret;
-
-    RCU_READ_LOCK_GUARD();
-    rdma = qatomic_rcu_read(&rioc->rdmaout);
-
-    if (!rdma) {
-        return -1;
-    }
-
-    if (rdma_errored(rdma)) {
-        return -1;
-    }
-
-    qemu_fflush(f);
-
-    /*
-     * Add this page to the current 'chunk'. If the chunk
-     * is full, or the page doesn't belong to the current chunk,
-     * an actual RDMA write will occur and a new chunk will be formed.
-     */
-    ret = qemu_rdma_write(rdma, block_offset, offset, size, &err);
-    if (ret < 0) {
-        error_report_err(err);
-        goto err;
-    }
-
-    /*
-     * Drain the Completion Queue if possible, but do not block,
-     * just poll.
-     *
-     * If nothing to poll, the end of the iteration will do this
-     * again to make sure we don't overflow the request queue.
-     */
-    while (1) {
-        uint64_t wr_id, wr_id_in;
-        ret = qemu_rdma_poll(rdma, rdma->recv_cq, &wr_id_in, NULL);
-
-        if (ret < 0) {
-            error_report("rdma migration: polling error");
-            goto err;
-        }
-
-        wr_id = wr_id_in & RDMA_WRID_TYPE_MASK;
-
-        if (wr_id == RDMA_WRID_NONE) {
-            break;
-        }
-    }
-
-    while (1) {
-        uint64_t wr_id, wr_id_in;
-        ret = qemu_rdma_poll(rdma, rdma->send_cq, &wr_id_in, NULL);
-
-        if (ret < 0) {
-            error_report("rdma migration: polling error");
-            goto err;
-        }
-
-        wr_id = wr_id_in & RDMA_WRID_TYPE_MASK;
-
-        if (wr_id == RDMA_WRID_NONE) {
-            break;
-        }
-    }
-
-    return RAM_SAVE_CONTROL_DELAYED;
-
-err:
-    rdma->errored = true;
-    return -1;
-}
-
-int rdma_control_save_page(QEMUFile *f, ram_addr_t block_offset,
-                           ram_addr_t offset, size_t size)
-{
-    if (!migrate_rdma() || migration_in_postcopy()) {
-        return RAM_SAVE_CONTROL_NOT_SUPP;
-    }
-
-    int ret = qemu_rdma_save_page(f, block_offset, offset, size);
-
-    if (ret != RAM_SAVE_CONTROL_DELAYED &&
-        ret != RAM_SAVE_CONTROL_NOT_SUPP) {
-        if (ret < 0) {
-            qemu_file_set_error(f, ret);
-        }
-    }
-    return ret;
-}
-
-static void rdma_accept_incoming_migration(void *opaque);
-
-static void rdma_cm_poll_handler(void *opaque)
-{
-    RDMAContext *rdma = opaque;
-    struct rdma_cm_event *cm_event;
-    MigrationIncomingState *mis = migration_incoming_get_current();
-
-    if (rdma_get_cm_event(rdma->channel, &cm_event) < 0) {
-        error_report("get_cm_event failed %d", errno);
-        return;
-    }
-
-    if (cm_event->event == RDMA_CM_EVENT_DISCONNECTED ||
-        cm_event->event == RDMA_CM_EVENT_DEVICE_REMOVAL) {
-        if (!rdma->errored &&
-            migration_incoming_get_current()->state !=
-              MIGRATION_STATUS_COMPLETED) {
-            error_report("receive cm event, cm event is %d", cm_event->event);
-            rdma->errored = true;
-            if (rdma->return_path) {
-                rdma->return_path->errored = true;
-            }
-        }
-        rdma_ack_cm_event(cm_event);
-        if (mis->loadvm_co) {
-            qemu_coroutine_enter(mis->loadvm_co);
-        }
-        return;
-    }
-    rdma_ack_cm_event(cm_event);
-}
-
-static int qemu_rdma_accept(RDMAContext *rdma)
-{
-    Error *err = NULL;
-    RDMACapabilities cap;
-    struct rdma_conn_param conn_param = {
-                                            .responder_resources = 2,
-                                            .private_data = &cap,
-                                            .private_data_len = sizeof(cap),
-                                         };
-    RDMAContext *rdma_return_path = NULL;
-    g_autoptr(InetSocketAddress) isock = g_new0(InetSocketAddress, 1);
-    struct rdma_cm_event *cm_event;
-    struct ibv_context *verbs;
-    int ret;
-
-    ret = rdma_get_cm_event(rdma->channel, &cm_event);
-    if (ret < 0) {
-        goto err_rdma_dest_wait;
-    }
-
-    if (cm_event->event != RDMA_CM_EVENT_CONNECT_REQUEST) {
-        rdma_ack_cm_event(cm_event);
-        goto err_rdma_dest_wait;
-    }
-
-    isock->host = g_strdup(rdma->host);
-    isock->port = g_strdup_printf("%d", rdma->port);
-
-    /*
-     * initialize the RDMAContext for return path for postcopy after first
-     * connection request reached.
-     */
-    if ((migrate_postcopy() || migrate_return_path())
-        && !rdma->is_return_path) {
-        rdma_return_path = qemu_rdma_data_init(isock, NULL);
-        if (rdma_return_path == NULL) {
-            rdma_ack_cm_event(cm_event);
-            goto err_rdma_dest_wait;
-        }
-
-        qemu_rdma_return_path_dest_init(rdma_return_path, rdma);
-    }
-
-    memcpy(&cap, cm_event->param.conn.private_data, sizeof(cap));
-
-    network_to_caps(&cap);
-
-    if (cap.version < 1 || cap.version > RDMA_CONTROL_VERSION_CURRENT) {
-        error_report("Unknown source RDMA version: %d, bailing...",
-                     cap.version);
-        rdma_ack_cm_event(cm_event);
-        goto err_rdma_dest_wait;
-    }
-
-    /*
-     * Respond with only the capabilities this version of QEMU knows about.
-     */
-    cap.flags &= known_capabilities;
-
-    /*
-     * Enable the ones that we do know about.
-     * Add other checks here as new ones are introduced.
-     */
-    if (cap.flags & RDMA_CAPABILITY_PIN_ALL) {
-        rdma->pin_all = true;
-    }
-
-    rdma->cm_id = cm_event->id;
-    verbs = cm_event->id->verbs;
-
-    rdma_ack_cm_event(cm_event);
-
-    trace_qemu_rdma_accept_pin_state(rdma->pin_all);
-
-    caps_to_network(&cap);
-
-    trace_qemu_rdma_accept_pin_verbsc(verbs);
-
-    if (!rdma->verbs) {
-        rdma->verbs = verbs;
-    } else if (rdma->verbs != verbs) {
-        error_report("ibv context not matching %p, %p!", rdma->verbs,
-                     verbs);
-        goto err_rdma_dest_wait;
-    }
-
-    qemu_rdma_dump_id("dest_init", verbs);
-
-    ret = qemu_rdma_alloc_pd_cq(rdma, &err);
-    if (ret < 0) {
-        error_report_err(err);
-        goto err_rdma_dest_wait;
-    }
-
-    ret = qemu_rdma_alloc_qp(rdma);
-    if (ret < 0) {
-        error_report("rdma migration: error allocating qp!");
-        goto err_rdma_dest_wait;
-    }
-
-    qemu_rdma_init_ram_blocks(rdma);
-
-    for (int i = 0; i < RDMA_WRID_MAX; i++) {
-        ret = qemu_rdma_reg_control(rdma, i);
-        if (ret < 0) {
-            error_report("rdma: error registering %d control", i);
-            goto err_rdma_dest_wait;
-        }
-    }
-
-    /* Accept the second connection request for return path */
-    if ((migrate_postcopy() || migrate_return_path())
-        && !rdma->is_return_path) {
-        qemu_set_fd_handler(rdma->channel->fd, rdma_accept_incoming_migration,
-                            NULL,
-                            (void *)(intptr_t)rdma->return_path);
-    } else {
-        qemu_set_fd_handler(rdma->channel->fd, rdma_cm_poll_handler,
-                            NULL, rdma);
-    }
-
-    ret = rdma_accept(rdma->cm_id, &conn_param);
-    if (ret < 0) {
-        error_report("rdma_accept failed");
-        goto err_rdma_dest_wait;
-    }
-
-    ret = rdma_get_cm_event(rdma->channel, &cm_event);
-    if (ret < 0) {
-        error_report("rdma_accept get_cm_event failed");
-        goto err_rdma_dest_wait;
-    }
-
-    if (cm_event->event != RDMA_CM_EVENT_ESTABLISHED) {
-        error_report("rdma_accept not event established");
-        rdma_ack_cm_event(cm_event);
-        goto err_rdma_dest_wait;
-    }
-
-    rdma_ack_cm_event(cm_event);
-    rdma->connected = true;
-
-    ret = qemu_rdma_post_recv_control(rdma, RDMA_WRID_READY, &err);
-    if (ret < 0) {
-        error_report_err(err);
-        goto err_rdma_dest_wait;
-    }
-
-    qemu_rdma_dump_gid("dest_connect", rdma->cm_id);
-
-    return 0;
-
-err_rdma_dest_wait:
-    rdma->errored = true;
-    qemu_rdma_cleanup(rdma);
-    g_free(rdma_return_path);
-    return -1;
-}
-
-static int dest_ram_sort_func(const void *a, const void *b)
-{
-    unsigned int a_index = ((const RDMALocalBlock *)a)->src_index;
-    unsigned int b_index = ((const RDMALocalBlock *)b)->src_index;
-
-    return (a_index < b_index) ? -1 : (a_index != b_index);
-}
-
-/*
- * During each iteration of the migration, we listen for instructions
- * by the source VM to perform dynamic page registrations before they
- * can perform RDMA operations.
- *
- * We respond with the 'rkey'.
- *
- * Keep doing this until the source tells us to stop.
- */
-int rdma_registration_handle(QEMUFile *f)
-{
-    RDMAControlHeader reg_resp = { .len = sizeof(RDMARegisterResult),
-                               .type = RDMA_CONTROL_REGISTER_RESULT,
-                               .repeat = 0,
-                             };
-    RDMAControlHeader unreg_resp = { .len = 0,
-                               .type = RDMA_CONTROL_UNREGISTER_FINISHED,
-                               .repeat = 0,
-                             };
-    RDMAControlHeader blocks = { .type = RDMA_CONTROL_RAM_BLOCKS_RESULT,
-                                 .repeat = 1 };
-    QIOChannelRDMA *rioc;
-    Error *err = NULL;
-    RDMAContext *rdma;
-    RDMALocalBlocks *local;
-    RDMAControlHeader head;
-    RDMARegister *reg, *registers;
-    RDMACompress *comp;
-    RDMARegisterResult *reg_result;
-    static RDMARegisterResult results[RDMA_CONTROL_MAX_COMMANDS_PER_MESSAGE];
-    RDMALocalBlock *block;
-    void *host_addr;
-    int ret;
-    int idx = 0;
-
-    if (!migrate_rdma()) {
-        return 0;
-    }
-
-    RCU_READ_LOCK_GUARD();
-    rioc = QIO_CHANNEL_RDMA(qemu_file_get_ioc(f));
-    rdma = qatomic_rcu_read(&rioc->rdmain);
-
-    if (!rdma) {
-        return -1;
-    }
-
-    if (rdma_errored(rdma)) {
-        return -1;
-    }
-
-    local = &rdma->local_ram_blocks;
-    do {
-        trace_rdma_registration_handle_wait();
-
-        ret = qemu_rdma_exchange_recv(rdma, &head, RDMA_CONTROL_NONE, &err);
-
-        if (ret < 0) {
-            error_report_err(err);
-            break;
-        }
-
-        if (head.repeat > RDMA_CONTROL_MAX_COMMANDS_PER_MESSAGE) {
-            error_report("rdma: Too many requests in this message (%d)."
-                            "Bailing.", head.repeat);
-            break;
-        }
-
-        switch (head.type) {
-        case RDMA_CONTROL_COMPRESS:
-            comp = (RDMACompress *) rdma->wr_data[idx].control_curr;
-            network_to_compress(comp);
-
-            trace_rdma_registration_handle_compress(comp->length,
-                                                    comp->block_idx,
-                                                    comp->offset);
-            if (comp->block_idx >= rdma->local_ram_blocks.nb_blocks) {
-                error_report("rdma: 'compress' bad block index %u (vs %d)",
-                             (unsigned int)comp->block_idx,
-                             rdma->local_ram_blocks.nb_blocks);
-                goto err;
-            }
-            block = &(rdma->local_ram_blocks.block[comp->block_idx]);
-
-            host_addr = block->local_host_addr +
-                            (comp->offset - block->offset);
-            if (comp->value) {
-                error_report("rdma: Zero page with non-zero (%d) value",
-                             comp->value);
-                goto err;
-            }
-            ram_handle_zero(host_addr, comp->length);
-            break;
-
-        case RDMA_CONTROL_REGISTER_FINISHED:
-            trace_rdma_registration_handle_finished();
-            return 0;
-
-        case RDMA_CONTROL_RAM_BLOCKS_REQUEST:
-            trace_rdma_registration_handle_ram_blocks();
-
-            /* Sort our local RAM Block list so it's the same as the source,
-             * we can do this since we've filled in a src_index in the list
-             * as we received the RAMBlock list earlier.
-             */
-            qsort(rdma->local_ram_blocks.block,
-                  rdma->local_ram_blocks.nb_blocks,
-                  sizeof(RDMALocalBlock), dest_ram_sort_func);
-            for (int i = 0; i < local->nb_blocks; i++) {
-                local->block[i].index = i;
-            }
-
-            if (rdma->pin_all) {
-                ret = qemu_rdma_reg_whole_ram_blocks(rdma, &err);
-                if (ret < 0) {
-                    error_report_err(err);
-                    goto err;
-                }
-            }
-
-            /*
-             * Dest uses this to prepare to transmit the RAMBlock descriptions
-             * to the source VM after connection setup.
-             * Both sides use the "remote" structure to communicate and update
-             * their "local" descriptions with what was sent.
-             */
-            for (int i = 0; i < local->nb_blocks; i++) {
-                rdma->dest_blocks[i].remote_host_addr =
-                    (uintptr_t)(local->block[i].local_host_addr);
-
-                if (rdma->pin_all) {
-                    rdma->dest_blocks[i].remote_rkey = local->block[i].mr->rkey;
-                }
-
-                rdma->dest_blocks[i].offset = local->block[i].offset;
-                rdma->dest_blocks[i].length = local->block[i].length;
-
-                dest_block_to_network(&rdma->dest_blocks[i]);
-                trace_rdma_registration_handle_ram_blocks_loop(
-                    local->block[i].block_name,
-                    local->block[i].offset,
-                    local->block[i].length,
-                    local->block[i].local_host_addr,
-                    local->block[i].src_index);
-            }
-
-            blocks.len = rdma->local_ram_blocks.nb_blocks
-                                                * sizeof(RDMADestBlock);
-
-
-            ret = qemu_rdma_post_send_control(rdma,
-                                    (uint8_t *) rdma->dest_blocks, &blocks,
-                                    &err);
-
-            if (ret < 0) {
-                error_report_err(err);
-                goto err;
-            }
-
-            break;
-        case RDMA_CONTROL_REGISTER_REQUEST:
-            trace_rdma_registration_handle_register(head.repeat);
-
-            reg_resp.repeat = head.repeat;
-            registers = (RDMARegister *) rdma->wr_data[idx].control_curr;
-
-            for (int count = 0; count < head.repeat; count++) {
-                uint64_t chunk;
-                uint8_t *chunk_start, *chunk_end;
-
-                reg = &registers[count];
-                network_to_register(reg);
-
-                reg_result = &results[count];
-
-                trace_rdma_registration_handle_register_loop(count,
-                         reg->current_index, reg->key.current_addr, reg->chunks);
-
-                if (reg->current_index >= rdma->local_ram_blocks.nb_blocks) {
-                    error_report("rdma: 'register' bad block index %u (vs %d)",
-                                 (unsigned int)reg->current_index,
-                                 rdma->local_ram_blocks.nb_blocks);
-                    goto err;
-                }
-                block = &(rdma->local_ram_blocks.block[reg->current_index]);
-                if (block->is_ram_block) {
-                    if (block->offset > reg->key.current_addr) {
-                        error_report("rdma: bad register address for block %s"
-                            " offset: %" PRIx64 " current_addr: %" PRIx64,
-                            block->block_name, block->offset,
-                            reg->key.current_addr);
-                        goto err;
-                    }
-                    host_addr = (block->local_host_addr +
-                                (reg->key.current_addr - block->offset));
-                    chunk = ram_chunk_index(block->local_host_addr,
-                                            (uint8_t *) host_addr);
-                } else {
-                    chunk = reg->key.chunk;
-                    host_addr = block->local_host_addr +
-                        (reg->key.chunk * (1UL << RDMA_REG_CHUNK_SHIFT));
-                    /* Check for particularly bad chunk value */
-                    if (host_addr < (void *)block->local_host_addr) {
-                        error_report("rdma: bad chunk for block %s"
-                            " chunk: %" PRIx64,
-                            block->block_name, reg->key.chunk);
-                        goto err;
-                    }
-                }
-                chunk_start = ram_chunk_start(block, chunk);
-                chunk_end = ram_chunk_end(block, chunk + reg->chunks);
-                /* avoid "-Waddress-of-packed-member" warning */
-                uint32_t tmp_rkey = 0;
-                if (qemu_rdma_register_and_get_keys(rdma, block,
-                            (uintptr_t)host_addr, NULL, &tmp_rkey,
-                            chunk, chunk_start, chunk_end)) {
-                    error_report("cannot get rkey");
-                    goto err;
-                }
-                reg_result->rkey = tmp_rkey;
-
-                reg_result->host_addr = (uintptr_t)block->local_host_addr;
-
-                trace_rdma_registration_handle_register_rkey(reg_result->rkey);
-
-                result_to_network(reg_result);
-            }
-
-            ret = qemu_rdma_post_send_control(rdma,
-                            (uint8_t *) results, &reg_resp, &err);
-
-            if (ret < 0) {
-                error_report_err(err);
-                goto err;
-            }
-            break;
-        case RDMA_CONTROL_UNREGISTER_REQUEST:
-            trace_rdma_registration_handle_unregister(head.repeat);
-            unreg_resp.repeat = head.repeat;
-            registers = (RDMARegister *) rdma->wr_data[idx].control_curr;
-
-            for (int count = 0; count < head.repeat; count++) {
-                reg = &registers[count];
-                network_to_register(reg);
-
-                trace_rdma_registration_handle_unregister_loop(count,
-                           reg->current_index, reg->key.chunk);
-
-                block = &(rdma->local_ram_blocks.block[reg->current_index]);
-
-                ret = ibv_dereg_mr(block->pmr[reg->key.chunk]);
-                block->pmr[reg->key.chunk] = NULL;
-
-                if (ret != 0) {
-                    error_report("rdma unregistration chunk failed: %s",
-                                 strerror(errno));
-                    goto err;
-                }
-
-                rdma->total_registrations--;
-
-                trace_rdma_registration_handle_unregister_success(reg->key.chunk);
-            }
-
-            ret = qemu_rdma_post_send_control(rdma, NULL, &unreg_resp, &err);
-
-            if (ret < 0) {
-                error_report_err(err);
-                goto err;
-            }
-            break;
-        case RDMA_CONTROL_REGISTER_RESULT:
-            error_report("Invalid RESULT message at dest.");
-            goto err;
-        default:
-            error_report("Unknown control message %s", control_desc(head.type));
-            goto err;
-        }
-    } while (1);
-
-err:
-    rdma->errored = true;
-    return -1;
-}
-
-/* Destination:
- * Called during the initial RAM load section which lists the
- * RAMBlocks by name.  This lets us know the order of the RAMBlocks on
- * the source.  We've already built our local RAMBlock list, but not
- * yet sent the list to the source.
- */
-int rdma_block_notification_handle(QEMUFile *f, const char *name)
-{
-    int curr;
-    int found = -1;
-
-    if (!migrate_rdma()) {
-        return 0;
-    }
-
-    RCU_READ_LOCK_GUARD();
-    QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(qemu_file_get_ioc(f));
-    RDMAContext *rdma = qatomic_rcu_read(&rioc->rdmain);
-
-    if (!rdma) {
-        return -1;
-    }
-
-    /* Find the matching RAMBlock in our local list */
-    for (curr = 0; curr < rdma->local_ram_blocks.nb_blocks; curr++) {
-        if (!strcmp(rdma->local_ram_blocks.block[curr].block_name, name)) {
-            found = curr;
-            break;
-        }
-    }
-
-    if (found == -1) {
-        error_report("RAMBlock '%s' not found on destination", name);
-        return -1;
-    }
-
-    rdma->local_ram_blocks.block[curr].src_index = rdma->next_src_index;
-    trace_rdma_block_notification_handle(name, rdma->next_src_index);
-    rdma->next_src_index++;
-
-    return 0;
-}
-
-int rdma_registration_start(QEMUFile *f, uint64_t flags)
-{
-    if (!migrate_rdma() || migration_in_postcopy()) {
-        return 0;
-    }
-
-    QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(qemu_file_get_ioc(f));
-    RCU_READ_LOCK_GUARD();
-    RDMAContext *rdma = qatomic_rcu_read(&rioc->rdmaout);
-    if (!rdma) {
-        return -1;
-    }
-
-    if (rdma_errored(rdma)) {
-        return -1;
-    }
-
-    trace_rdma_registration_start(flags);
-    qemu_put_be64(f, RAM_SAVE_FLAG_HOOK);
-    return qemu_fflush(f);
-}
-
-/*
- * Inform dest that dynamic registrations are done for now.
- * First, flush writes, if any.
- */
-int rdma_registration_stop(QEMUFile *f, uint64_t flags)
-{
-    QIOChannelRDMA *rioc;
-    Error *err = NULL;
-    RDMAContext *rdma;
-    RDMAControlHeader head = { .len = 0, .repeat = 1 };
-    int ret;
-
-    if (!migrate_rdma() || migration_in_postcopy()) {
-        return 0;
-    }
-
-    RCU_READ_LOCK_GUARD();
-    rioc = QIO_CHANNEL_RDMA(qemu_file_get_ioc(f));
-    rdma = qatomic_rcu_read(&rioc->rdmaout);
-    if (!rdma) {
-        return -1;
-    }
-
-    if (rdma_errored(rdma)) {
-        return -1;
-    }
-
-    qemu_fflush(f);
-    ret = qemu_rdma_drain_cq(rdma);
-
-    if (ret < 0) {
-        goto err;
-    }
-
-    if (flags == RAM_CONTROL_SETUP) {
-        RDMAControlHeader resp = {.type = RDMA_CONTROL_RAM_BLOCKS_RESULT };
-        RDMALocalBlocks *local = &rdma->local_ram_blocks;
-        int reg_result_idx, nb_dest_blocks;
-
-        head.type = RDMA_CONTROL_RAM_BLOCKS_REQUEST;
-        trace_rdma_registration_stop_ram();
-
-        /*
-         * Make sure that we parallelize the pinning on both sides.
-         * For very large guests, doing this serially takes a really
-         * long time, so we have to 'interleave' the pinning locally
-         * with the control messages by performing the pinning on this
-         * side before we receive the control response from the other
-         * side that the pinning has completed.
-         */
-        ret = qemu_rdma_exchange_send(rdma, &head, NULL, &resp,
-                    &reg_result_idx, rdma->pin_all ?
-                    qemu_rdma_reg_whole_ram_blocks : NULL,
-                    &err);
-        if (ret < 0) {
-            error_report_err(err);
-            return -1;
-        }
-
-        nb_dest_blocks = resp.len / sizeof(RDMADestBlock);
-
-        /*
-         * The protocol uses two different sets of rkeys (mutually exclusive):
-         * 1. One key to represent the virtual address of the entire ram block.
-         *    (dynamic chunk registration disabled - pin everything with one rkey.)
-         * 2. One to represent individual chunks within a ram block.
-         *    (dynamic chunk registration enabled - pin individual chunks.)
-         *
-         * Once the capability is successfully negotiated, the destination transmits
-         * the keys to use (or sends them later) including the virtual addresses
-         * and then propagates the remote ram block descriptions to his local copy.
-         */
-
-        if (local->nb_blocks != nb_dest_blocks) {
-            error_report("ram blocks mismatch (Number of blocks %d vs %d)",
-                         local->nb_blocks, nb_dest_blocks);
-            error_printf("Your QEMU command line parameters are probably "
-                         "not identical on both the source and destination.");
-            rdma->errored = true;
-            return -1;
-        }
-
-        qemu_rdma_move_header(rdma, reg_result_idx, &resp);
-        memcpy(rdma->dest_blocks,
-            rdma->wr_data[reg_result_idx].control_curr, resp.len);
-        for (int i = 0; i < nb_dest_blocks; i++) {
-            network_to_dest_block(&rdma->dest_blocks[i]);
-
-            /* We require that the blocks are in the same order */
-            if (rdma->dest_blocks[i].length != local->block[i].length) {
-                error_report("Block %s/%d has a different length %" PRIu64
-                             "vs %" PRIu64,
-                             local->block[i].block_name, i,
-                             local->block[i].length,
-                             rdma->dest_blocks[i].length);
-                rdma->errored = true;
-                return -1;
-            }
-            local->block[i].remote_host_addr =
-                    rdma->dest_blocks[i].remote_host_addr;
-            local->block[i].remote_rkey = rdma->dest_blocks[i].remote_rkey;
-        }
-    }
-
-    trace_rdma_registration_stop(flags);
-
-    head.type = RDMA_CONTROL_REGISTER_FINISHED;
-    ret = qemu_rdma_exchange_send(rdma, &head, NULL, NULL, NULL, NULL, &err);
-
-    if (ret < 0) {
-        error_report_err(err);
-        goto err;
-    }
-
-    return 0;
-err:
-    rdma->errored = true;
-    return -1;
-}
-
-static void qio_channel_rdma_finalize(Object *obj)
-{
-    QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(obj);
-    if (rioc->rdmain) {
-        qemu_rdma_cleanup(rioc->rdmain);
-        g_free(rioc->rdmain);
-        rioc->rdmain = NULL;
-    }
-    if (rioc->rdmaout) {
-        qemu_rdma_cleanup(rioc->rdmaout);
-        g_free(rioc->rdmaout);
-        rioc->rdmaout = NULL;
-    }
-}
-
-static void qio_channel_rdma_class_init(ObjectClass *klass,
-                                        void *class_data G_GNUC_UNUSED)
-{
-    QIOChannelClass *ioc_klass = QIO_CHANNEL_CLASS(klass);
-
-    ioc_klass->io_writev = qio_channel_rdma_writev;
-    ioc_klass->io_readv = qio_channel_rdma_readv;
-    ioc_klass->io_set_blocking = qio_channel_rdma_set_blocking;
-    ioc_klass->io_close = qio_channel_rdma_close;
-    ioc_klass->io_create_watch = qio_channel_rdma_create_watch;
-    ioc_klass->io_set_aio_fd_handler = qio_channel_rdma_set_aio_fd_handler;
-    ioc_klass->io_shutdown = qio_channel_rdma_shutdown;
-}
-
-static const TypeInfo qio_channel_rdma_info = {
-    .parent = TYPE_QIO_CHANNEL,
-    .name = TYPE_QIO_CHANNEL_RDMA,
-    .instance_size = sizeof(QIOChannelRDMA),
-    .instance_finalize = qio_channel_rdma_finalize,
-    .class_init = qio_channel_rdma_class_init,
-};
-
-static void qio_channel_rdma_register_types(void)
-{
-    type_register_static(&qio_channel_rdma_info);
-}
-
-type_init(qio_channel_rdma_register_types);
-
-static QEMUFile *rdma_new_input(RDMAContext *rdma)
-{
-    QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(object_new(TYPE_QIO_CHANNEL_RDMA));
-
-    rioc->file = qemu_file_new_input(QIO_CHANNEL(rioc));
-    rioc->rdmain = rdma;
-    rioc->rdmaout = rdma->return_path;
-
-    return rioc->file;
-}
-
-static QEMUFile *rdma_new_output(RDMAContext *rdma)
-{
-    QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(object_new(TYPE_QIO_CHANNEL_RDMA));
-
-    rioc->file = qemu_file_new_output(QIO_CHANNEL(rioc));
-    rioc->rdmaout = rdma;
-    rioc->rdmain = rdma->return_path;
-
-    return rioc->file;
-}
-
-static void rdma_accept_incoming_migration(void *opaque)
-{
-    RDMAContext *rdma = opaque;
-    QEMUFile *f;
-
-    trace_qemu_rdma_accept_incoming_migration();
-    if (qemu_rdma_accept(rdma) < 0) {
-        error_report("RDMA ERROR: Migration initialization failed");
-        return;
-    }
-
-    trace_qemu_rdma_accept_incoming_migration_accepted();
-
-    if (rdma->is_return_path) {
-        return;
-    }
-
-    f = rdma_new_input(rdma);
-    if (f == NULL) {
-        error_report("RDMA ERROR: could not open RDMA for input");
-        qemu_rdma_cleanup(rdma);
-        return;
-    }
-
-    rdma->migration_started_on_destination = 1;
-    migration_fd_process_incoming(f);
-}
-
-void rdma_start_incoming_migration(InetSocketAddress *host_port,
-                                   Error **errp)
-{
-    MigrationState *s = migrate_get_current();
-    int ret;
-    RDMAContext *rdma;
-
-    trace_rdma_start_incoming_migration();
-
-    /* Avoid ram_block_discard_disable(), cannot change during migration. */
-    if (ram_block_discard_is_required()) {
-        error_setg(errp, "RDMA: cannot disable RAM discard");
-        return;
-    }
-
-    rdma = qemu_rdma_data_init(host_port, errp);
-    if (rdma == NULL) {
-        goto err;
-    }
-
-    ret = qemu_rdma_dest_init(rdma, errp);
-    if (ret < 0) {
-        goto err;
-    }
-
-    trace_rdma_start_incoming_migration_after_dest_init();
-
-    ret = rdma_listen(rdma->listen_id, 5);
-
-    if (ret < 0) {
-        error_setg(errp, "RDMA ERROR: listening on socket!");
-        goto cleanup_rdma;
-    }
-
-    trace_rdma_start_incoming_migration_after_rdma_listen();
-    s->rdma_migration = true;
-    qemu_set_fd_handler(rdma->channel->fd, rdma_accept_incoming_migration,
-                        NULL, (void *)(intptr_t)rdma);
-    return;
-
-cleanup_rdma:
-    qemu_rdma_cleanup(rdma);
-err:
-    if (rdma) {
-        g_free(rdma->host);
-    }
-    g_free(rdma);
-}
-
-void rdma_start_outgoing_migration(void *opaque,
-                            InetSocketAddress *host_port, Error **errp)
-{
-    MigrationState *s = opaque;
-    RDMAContext *rdma_return_path = NULL;
-    RDMAContext *rdma;
-    int ret;
-
-    /* Avoid ram_block_discard_disable(), cannot change during migration. */
-    if (ram_block_discard_is_required()) {
-        error_setg(errp, "RDMA: cannot disable RAM discard");
-        return;
-    }
-
-    rdma = qemu_rdma_data_init(host_port, errp);
-    if (rdma == NULL) {
-        goto err;
-    }
-
-    ret = qemu_rdma_source_init(rdma, migrate_rdma_pin_all(), errp);
-
-    if (ret < 0) {
-        goto err;
-    }
-
-    trace_rdma_start_outgoing_migration_after_rdma_source_init();
-    ret = qemu_rdma_connect(rdma, false, errp);
-
-    if (ret < 0) {
-        goto err;
-    }
-
-    /* RDMA postcopy need a separate queue pair for return path */
-    if (migrate_postcopy() || migrate_return_path()) {
-        rdma_return_path = qemu_rdma_data_init(host_port, errp);
-
-        if (rdma_return_path == NULL) {
-            goto return_path_err;
-        }
-
-        ret = qemu_rdma_source_init(rdma_return_path,
-                                    migrate_rdma_pin_all(), errp);
-
-        if (ret < 0) {
-            goto return_path_err;
-        }
-
-        ret = qemu_rdma_connect(rdma_return_path, true, errp);
-
-        if (ret < 0) {
-            goto return_path_err;
-        }
-
-        rdma->return_path = rdma_return_path;
-        rdma_return_path->return_path = rdma;
-        rdma_return_path->is_return_path = true;
-    }
-
-    trace_rdma_start_outgoing_migration_after_rdma_connect();
-
-    s->to_dst_file = rdma_new_output(rdma);
-    s->rdma_migration = true;
-    migrate_fd_connect(s, NULL);
-    return;
-return_path_err:
-    qemu_rdma_cleanup(rdma);
-err:
-    g_free(rdma);
-    g_free(rdma_return_path);
-}
diff --git a/migration/savevm.c b/migration/savevm.c
index 388d7af7cd..939d35d69e 100644
--- a/migration/savevm.c
+++ b/migration/savevm.c
@@ -2970,7 +2970,7 @@ int qemu_loadvm_state(QEMUFile *f)
 
     /* We've got to be careful; if we don't read the data and just shut the fd
      * then the sender can error if we close while it's still sending.
-     * We also mustn't read data that isn't there; some transports (RDMA)
+     * We also mustn't read data that isn't there; some transports
      * will stall waiting for that data when the source has already closed.
      */
     if (ret == 0 && should_send_vmdesc()) {
diff --git a/meson_options.txt b/meson_options.txt
index b5c0bad9e7..79b69d4286 100644
--- a/meson_options.txt
+++ b/meson_options.txt
@@ -196,8 +196,6 @@ option('rbd', type : 'feature', value : 'auto',
        description: 'Ceph block device driver')
 option('opengl', type : 'feature', value : 'auto',
        description: 'OpenGL support')
-option('rdma', type : 'feature', value : 'auto',
-       description: 'Enable RDMA-based migration')
 option('gtk', type : 'feature', value : 'auto',
        description: 'GTK+ user interface')
 option('sdl', type : 'feature', value : 'auto',
diff --git a/migration/meson.build b/migration/meson.build
index 1eeb915ff6..e2cd92c01f 100644
--- a/migration/meson.build
+++ b/migration/meson.build
@@ -36,7 +36,6 @@ if get_option('replication').allowed()
   system_ss.add(files('colo-failover.c', 'colo.c'))
 endif
 
-system_ss.add(when: rdma, if_true: files('rdma.c'))
 if get_option('live_block_migration').allowed()
   system_ss.add(files('block.c'))
 endif
diff --git a/migration/trace-events b/migration/trace-events
index f0e1cb80c7..7db3a5194f 100644
--- a/migration/trace-events
+++ b/migration/trace-events
@@ -193,7 +193,7 @@ process_incoming_migration_co_postcopy_end_main(void) ""
 postcopy_preempt_enabled(bool value) "%d"
 
 # migration-stats
-migration_transferred_bytes(uint64_t qemu_file, uint64_t multifd, uint64_t rdma) "qemu_file %" PRIu64 " multifd %" PRIu64 " RDMA %" PRIu64
+migration_transferred_bytes(uint64_t qemu_file, uint64_t multifd) "qemu_file %" PRIu64 " multifd %" PRIu64
 
 # channel.c
 migration_set_incoming_channel(void *ioc, const char *ioctype) "ioc=%p ioctype=%s"
@@ -204,72 +204,6 @@ migrate_state_too_big(void) ""
 migrate_global_state_post_load(const char *state) "loaded state: %s"
 migrate_global_state_pre_save(const char *state) "saved state: %s"
 
-# rdma.c
-qemu_rdma_accept_incoming_migration(void) ""
-qemu_rdma_accept_incoming_migration_accepted(void) ""
-qemu_rdma_accept_pin_state(bool pin) "%d"
-qemu_rdma_accept_pin_verbsc(void *verbs) "Verbs context after listen: %p"
-qemu_rdma_block_for_wrid_miss(uint64_t wcomp, uint64_t req) "A Wanted wrid %" PRIu64 " but got %" PRIu64
-qemu_rdma_cleanup_disconnect(void) ""
-qemu_rdma_close(void) ""
-qemu_rdma_connect_pin_all_requested(void) ""
-qemu_rdma_connect_pin_all_outcome(bool pin) "%d"
-qemu_rdma_dest_init_trying(const char *host, const char *ip) "%s => %s"
-qemu_rdma_dump_id_failed(const char *who) "%s RDMA Device opened, but can't query port information"
-qemu_rdma_dump_id(const char *who, const char *name, const char *dev_name, const char *dev_path, const char *ibdev_path, int transport, const char *transport_name) "%s RDMA Device opened: kernel name %s uverbs device name %s, infiniband_verbs class device path %s, infiniband class device path %s, transport: (%d) %s"
-qemu_rdma_dump_gid(const char *who, const char *src, const char *dst) "%s Source GID: %s, Dest GID: %s"
-qemu_rdma_exchange_get_response_start(const char *desc) "CONTROL: %s receiving..."
-qemu_rdma_exchange_get_response_none(const char *desc, int type) "Surprise: got %s (%d)"
-qemu_rdma_exchange_send_issue_callback(void) ""
-qemu_rdma_exchange_send_waiting(const char *desc) "Waiting for response %s"
-qemu_rdma_exchange_send_received(const char *desc) "Response %s received."
-qemu_rdma_fill(size_t control_len, size_t size) "RDMA %zd of %zd bytes already in buffer"
-qemu_rdma_init_ram_blocks(int blocks) "Allocated %d local ram block structures"
-qemu_rdma_poll_recv(uint64_t comp, int64_t id, int sent) "completion %" PRIu64 " received (%" PRId64 ") left %d"
-qemu_rdma_poll_write(uint64_t comp, int left, uint64_t block, uint64_t chunk, void *local, void *remote) "completions %" PRIu64 " left %d, block %" PRIu64 ", chunk: %" PRIu64 " %p %p"
-qemu_rdma_poll_other(uint64_t comp, int left) "other completion %" PRIu64 " received left %d"
-qemu_rdma_post_send_control(const char *desc) "CONTROL: sending %s.."
-qemu_rdma_register_and_get_keys(uint64_t len, void *start) "Registering %" PRIu64 " bytes @ %p"
-qemu_rdma_register_odp_mr(const char *name) "Try to register On-Demand Paging memory region: %s"
-qemu_rdma_advise_mr(const char *name, uint32_t len, uint64_t addr, const char *res) "Try to advise block %s prefetch at %" PRIu32 "@0x%" PRIx64 ": %s"
-qemu_rdma_resolve_host_trying(const char *host, const char *ip) "Trying %s => %s"
-qemu_rdma_signal_unregister_append(uint64_t chunk, int pos) "Appending unregister chunk %" PRIu64 " at position %d"
-qemu_rdma_signal_unregister_already(uint64_t chunk) "Unregister chunk %" PRIu64 " already in queue"
-qemu_rdma_unregister_waiting_inflight(uint64_t chunk) "Cannot unregister inflight chunk: %" PRIu64
-qemu_rdma_unregister_waiting_proc(uint64_t chunk, int pos) "Processing unregister for chunk: %" PRIu64 " at position %d"
-qemu_rdma_unregister_waiting_send(uint64_t chunk) "Sending unregister for chunk: %" PRIu64
-qemu_rdma_unregister_waiting_complete(uint64_t chunk) "Unregister for chunk: %" PRIu64 " complete."
-qemu_rdma_write_flush(int sent) "sent total: %d"
-qemu_rdma_write_one_block(int count, int block, uint64_t chunk, uint64_t current, uint64_t len, int nb_sent, int nb_chunks) "(%d) Not clobbering: block: %d chunk %" PRIu64 " current %" PRIu64 " len %" PRIu64 " %d %d"
-qemu_rdma_write_one_post(uint64_t chunk, long addr, long remote, uint32_t len) "Posting chunk: %" PRIu64 ", addr: 0x%lx remote: 0x%lx, bytes %" PRIu32
-qemu_rdma_write_one_queue_full(void) ""
-qemu_rdma_write_one_recvregres(int mykey, int theirkey, uint64_t chunk) "Received registration result: my key: 0x%x their key 0x%x, chunk %" PRIu64
-qemu_rdma_write_one_sendreg(uint64_t chunk, int len, int index, int64_t offset) "Sending registration request chunk %" PRIu64 " for %d bytes, index: %d, offset: %" PRId64
-qemu_rdma_write_one_top(uint64_t chunks, uint64_t size) "Writing %" PRIu64 " chunks, (%" PRIu64 " MB)"
-qemu_rdma_write_one_zero(uint64_t chunk, int len, int index, int64_t offset) "Entire chunk is zero, sending compress: %" PRIu64 " for %d bytes, index: %d, offset: %" PRId64
-rdma_add_block(const char *block_name, int block, uint64_t addr, uint64_t offset, uint64_t len, uint64_t end, uint64_t bits, int chunks) "Added Block: '%s':%d, addr: %" PRIu64 ", offset: %" PRIu64 " length: %" PRIu64 " end: %" PRIu64 " bits %" PRIu64 " chunks %d"
-rdma_block_notification_handle(const char *name, int index) "%s at %d"
-rdma_delete_block(void *block, uint64_t addr, uint64_t offset, uint64_t len, uint64_t end, uint64_t bits, int chunks) "Deleted Block: %p, addr: %" PRIu64 ", offset: %" PRIu64 " length: %" PRIu64 " end: %" PRIu64 " bits %" PRIu64 " chunks %d"
-rdma_registration_handle_compress(int64_t length, int index, int64_t offset) "Zapping zero chunk: %" PRId64 " bytes, index %d, offset %" PRId64
-rdma_registration_handle_finished(void) ""
-rdma_registration_handle_ram_blocks(void) ""
-rdma_registration_handle_ram_blocks_loop(const char *name, uint64_t offset, uint64_t length, void *local_host_addr, unsigned int src_index) "%s: @0x%" PRIx64 "/%" PRIu64 " host:@%p src_index: %u"
-rdma_registration_handle_register(int requests) "%d requests"
-rdma_registration_handle_register_loop(int req, int index, uint64_t addr, uint64_t chunks) "Registration request (%d): index %d, current_addr %" PRIu64 " chunks: %" PRIu64
-rdma_registration_handle_register_rkey(int rkey) "0x%x"
-rdma_registration_handle_unregister(int requests) "%d requests"
-rdma_registration_handle_unregister_loop(int count, int index, uint64_t chunk) "Unregistration request (%d): index %d, chunk %" PRIu64
-rdma_registration_handle_unregister_success(uint64_t chunk) "%" PRIu64
-rdma_registration_handle_wait(void) ""
-rdma_registration_start(uint64_t flags) "%" PRIu64
-rdma_registration_stop(uint64_t flags) "%" PRIu64
-rdma_registration_stop_ram(void) ""
-rdma_start_incoming_migration(void) ""
-rdma_start_incoming_migration_after_dest_init(void) ""
-rdma_start_incoming_migration_after_rdma_listen(void) ""
-rdma_start_outgoing_migration_after_rdma_connect(void) ""
-rdma_start_outgoing_migration_after_rdma_source_init(void) ""
-
 # postcopy-ram.c
 postcopy_discard_send_finish(const char *ramblock, int nwords, int ncmds) "%s mask words sent=%d in %d commands"
 postcopy_discard_send_range(const char *ramblock, unsigned long start, unsigned long length) "%s:%lx/%lx"
diff --git a/qemu-options.hx b/qemu-options.hx
index f7ef9b4e41..4f390c33ef 100644
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -4759,7 +4759,6 @@ ERST
 
 DEF("incoming", HAS_ARG, QEMU_OPTION_incoming, \
     "-incoming tcp:[host]:port[,to=maxport][,ipv4=on|off][,ipv6=on|off]\n" \
-    "-incoming rdma:host:port[,ipv4=on|off][,ipv6=on|off]\n" \
     "-incoming unix:socketpath\n" \
     "                prepare for incoming migration, listen on\n" \
     "                specified protocol and socket address\n" \
@@ -4773,8 +4772,6 @@ DEF("incoming", HAS_ARG, QEMU_OPTION_incoming, \
     QEMU_ARCH_ALL)
 SRST
 ``-incoming tcp:[host]:port[,to=maxport][,ipv4=on|off][,ipv6=on|off]``
-  \ 
-``-incoming rdma:host:port[,ipv4=on|off][,ipv6=on|off]``
     Prepare for incoming migration, listen on a given tcp port.
 
 ``-incoming unix:socketpath``
diff --git a/scripts/ci/org.centos/stream/8/build-environment.yml b/scripts/ci/org.centos/stream/8/build-environment.yml
index 1ead77e2cb..a366bb185b 100644
--- a/scripts/ci/org.centos/stream/8/build-environment.yml
+++ b/scripts/ci/org.centos/stream/8/build-environment.yml
@@ -68,7 +68,6 @@
           - pixman-devel
           - python38
           - python3-sphinx
-          - rdma-core-devel
           - redhat-rpm-config
           - snappy-devel
           - spice-glib-devel
diff --git a/scripts/ci/org.centos/stream/8/x86_64/configure b/scripts/ci/org.centos/stream/8/x86_64/configure
index 868db665f6..5dead834fb 100755
--- a/scripts/ci/org.centos/stream/8/x86_64/configure
+++ b/scripts/ci/org.centos/stream/8/x86_64/configure
@@ -103,7 +103,6 @@
 --disable-qed \
 --disable-qom-cast-debug \
 --disable-rbd \
---disable-rdma \
 --disable-replication \
 --disable-rng-none \
 --disable-safe-stack \
@@ -175,7 +174,6 @@
 --enable-opengl \
 --enable-pie \
 --enable-rbd \
---enable-rdma \
 --enable-seccomp \
 --enable-snappy \
 --enable-smartcard \
diff --git a/scripts/ci/setup/build-environment.yml b/scripts/ci/setup/build-environment.yml
index f344d1a850..0359b1c023 100644
--- a/scripts/ci/setup/build-environment.yml
+++ b/scripts/ci/setup/build-environment.yml
@@ -81,8 +81,6 @@
           - libglusterfs-dev
           - libgnutls28-dev
           - libgtk-3-dev
-          - libibumad-dev
-          - libibverbs-dev
           - libiscsi-dev
           - libjemalloc-dev
           - libjpeg-turbo8-dev
@@ -99,7 +97,6 @@
           - libpng-dev
           - libpulse-dev
           - librbd-dev
-          - librdmacm-dev
           - libsasl2-dev
           - libsdl2-dev
           - libsdl2-image-dev
@@ -236,7 +233,6 @@
           - pixman-devel
           - python38
           - python3-sphinx
-          - rdma-core-devel
           - redhat-rpm-config
           - snappy-devel
           - spice-glib-devel
diff --git a/scripts/coverity-scan/run-coverity-scan b/scripts/coverity-scan/run-coverity-scan
index 43cf770f5e..3dd14c3cc4 100755
--- a/scripts/coverity-scan/run-coverity-scan
+++ b/scripts/coverity-scan/run-coverity-scan
@@ -426,7 +426,7 @@ echo "Configuring..."
     --enable-libusb --enable-usb-redir \
     --enable-libiscsi --enable-libnfs --enable-seccomp \
     --enable-tpm --enable-libssh --enable-lzo --enable-snappy --enable-bzip2 \
-    --enable-numa --enable-rdma --enable-smartcard --enable-virglrenderer \
+    --enable-numa --enable-smartcard --enable-virglrenderer \
     --enable-mpath --enable-glusterfs \
     --enable-virtfs --enable-zstd
 
diff --git a/scripts/meson-buildoptions.sh b/scripts/meson-buildoptions.sh
index 5ace33f167..52c34598ba 100644
--- a/scripts/meson-buildoptions.sh
+++ b/scripts/meson-buildoptions.sh
@@ -167,7 +167,6 @@ meson_options_help() {
   printf "%s\n" '  qed             qed image format support'
   printf "%s\n" '  qga-vss         build QGA VSS support (broken with MinGW)'
   printf "%s\n" '  rbd             Ceph block device driver'
-  printf "%s\n" '  rdma            Enable RDMA-based migration'
   printf "%s\n" '  replication     replication support'
   printf "%s\n" '  rutabaga-gfx    rutabaga_gfx support'
   printf "%s\n" '  sdl             SDL user interface'
@@ -442,8 +441,6 @@ _meson_option_parse() {
     --disable-qom-cast-debug) printf "%s" -Dqom_cast_debug=false ;;
     --enable-rbd) printf "%s" -Drbd=enabled ;;
     --disable-rbd) printf "%s" -Drbd=disabled ;;
-    --enable-rdma) printf "%s" -Drdma=enabled ;;
-    --disable-rdma) printf "%s" -Drdma=disabled ;;
     --enable-relocatable) printf "%s" -Drelocatable=true ;;
     --disable-relocatable) printf "%s" -Drelocatable=false ;;
     --enable-replication) printf "%s" -Dreplication=enabled ;;
diff --git a/tests/lcitool/projects/qemu.yml b/tests/lcitool/projects/qemu.yml
index 149b15de57..511e48a5ec 100644
--- a/tests/lcitool/projects/qemu.yml
+++ b/tests/lcitool/projects/qemu.yml
@@ -48,8 +48,6 @@ packages:
  - libfdt
  - libffi
  - libgcrypt
- - libibumad
- - libibverbs
  - libiscsi
  - libjemalloc
  - libjpeg
@@ -58,7 +56,6 @@ packages:
  - libpmem
  - libpng
  - librbd
- - librdmacm
  - libseccomp
  - libselinux
  - libslirp
diff --git a/tests/migration/guestperf/engine.py b/tests/migration/guestperf/engine.py
index 608d7270f6..a704419082 100644
--- a/tests/migration/guestperf/engine.py
+++ b/tests/migration/guestperf/engine.py
@@ -41,7 +41,7 @@ def __init__(self, binary, dst_host, kernel, initrd, transport="tcp",
         self._dst_host = dst_host # Hostname of target host
         self._kernel = kernel # Path to kernel image
         self._initrd = initrd # Path to stress initrd
-        self._transport = transport # 'unix' or 'tcp' or 'rdma'
+        self._transport = transport # 'unix' or 'tcp'
         self._sleep = sleep
         self._verbose = verbose
         self._debug = debug
@@ -427,8 +427,6 @@ def run(self, hardware, scenario, result_dir=os.getcwd()):
 
         if self._transport == "tcp":
             uri = "tcp:%s:9000" % self._dst_host
-        elif self._transport == "rdma":
-            uri = "rdma:%s:9000" % self._dst_host
         elif self._transport == "unix":
             if self._dst_host != "localhost":
                 raise Exception("Running use unix migration transport for non-local host")
-- 
2.41.0



More information about the integration mailing list