<div dir="ltr"><div><div>I&#39;m having a problem with the read performance with the native fuse client. I can write at  250 to 300mb/s but can only read the same written file at a maximum of 60mb/s. Is this behavior normal? <br>When I tried the NFS mount the speed for read and write operations are about the same peaking both at about 300mb/s.<br><br></div><div>The tests I did were while copying to and from the mount with a 2gb, and 10gb file.<br></div><div><br></div><div>The build is 2 servers with replicated volumes, both with SSD drives under software Raid 1, 10Gbit local ethernet with MTU 9000, 64Gb ram and 16 core processor.<br><br></div><div>I&#39;ve tried a couple different configurations on the server and currently have the following:<br><br></div><div>Running glusterfs 3.8.5 built on Oct 20 2016 01:15:39<br></div><div><br>Volume Name: webstorage<br>Type: Replicate<br>Volume ID: 1a5924de-737c-4a3d-a195-a95ea1fc6ad6<br>Status: Started<br>Snapshot Count: 0<br>Number of Bricks: 1 x 2 = 2<br>Transport-type: tcp<br>Bricks:<br>Brick1: srv1:/data/glusterfs/bricks/1/webstorage<br>Brick2: srv2:/data/glusterfs/bricks/1/webstorage<br>Options Reconfigured:<br>nfs.outstanding-rpc-limit: 128<br>nfs.acl: off<br>performance.client-io-threads: on<br>cluster.lookup-optimize: on<br>server.outstanding-rpc-limit: 128<br>server.event-threads: 3<br>client.event-threads: 3<br>performance.read-ahead: on<br>performance.io-cache: on<br>performance.write-behind-window-size: 1MB<br>performance.cache-size: 15728640<br>performance.io-thread-count: 32<br>nfs.trusted-write: on<br>nfs.trusted-sync: on<br>performance.nfs.io-cache: on<br>performance.nfs.stat-prefetch: on<br>performance.nfs.io-threads: on<br>performance.nfs.read-ahead: off<br>nfs.mem-factor: 20<br>transport.address-family: inet<br>performance.readdir-ahead: on<br>nfs.disable: off<br>auth.allow: 172.16.*.*<br>performance.quick-read: on<br>cluster.read-hash-mode: 0<br><br></div><div>The client is running the same version of GlusterFs and have the same hardware specs as the servers.<br><br></div><div>Is there something that I&#39;m missing for the native fuse mount to perform a read speed comparable to the NFS mount? Or at least the same as the write speed of the fuse mount?<br><br></div><div>Thank you,<br></div><div>Regards.<br></div></div></div>