<div dir="ltr"><div><div>Hello,<br><br>We are interested in using Gluster as shared storage for video editing. Our clients are Macs connecting via NFS v3 over gigabit ethernet. Far more reads than writes.<br><br>We&#39;d like to test the waters with two nodes with similar specs:<br><br></div>Dual Xeon Processors E5-2643 v3 (3.40 GHz, 6 cores each)<br></div>128GB DDR4 2133 RAM<br>Myricom 10G-PCIE2-8C2-2 NIC with bonded 10gig connections<br><div><div>Supermicro X10DRH-C-B Motherboard with LSI 3108 RAID controller (2GB cache)<br></div><div>Attached JBOD with 16x 4TB SAS drives connected to a SAS2 Backplane<br><br></div><div>Performance (throughput and low latency) is more important to us than redundancy or space, although we&#39;d prefer to avoid significant downtime due to large heals or restoring from backup.<br><br></div><div>We&#39;d love some advice on which of these setups makes the most sense for video playback from multiple clients on Gluster:<br></div><div><ul><li>16 drive Hardware RAID6s using the RAID controllers on each node and then adding them into a Distributed Gluster Volume without replication (about 88% usable of the 128TB)<br></li><li>16 drive Hardware RAID6s using the RAID controllers on each node and then adding them into a Distributed Replica 2 Gluster Volume (about 44% usable of the 128TB)</li><li>Passing all 32 drives through in JBOD mode, adding them into a Distributed Replica 2 Gluster Volume spanning both nodes (50% usable of the 128TB)</li></ul><p>Also, planning for expansion, what are likely to be our performance bottlenecks? Total drive count, RAM, CPU, etc.</p><p>Thank you!</p><p>David Kline<br></p><p><br></p></div></div></div>