<div dir="ltr"><div><div><div>Hi All,<br><br></div>I am evaluating GlusterFS for one of our requirement. <br><br></div>My system is a chassis based system with multiple blade cards, where each blade card has one, two or more storage disks. <br><br></div><div>These blades are also compute blades (application runs on the same card).<br><br></div><div>Users can unconfigure those storage disk, can take out and place in other chassis (say admin).<br><br></div><div>Because of this action from admin, we will end up in varying configuration of gluster configuration, there no fixed gluster configuration for long.<br><br></div><div>Basically when admin unconfigure/configure disk to system, it will result in brick addition/removal of bricks from volume.<br><br></div><div>So my question is can we enable striping on the volume?, from my initial understanding this is not possible.<br><br></div><div>Is there any alternate to striping which can be enabled for this configuration?<br><br></div><div>Or GlusterFS is suitable for this use case?<br><br><br></div><div>Thanks,<br></div><div>Cloudy.<br></div><div><br></div><div><br></div><div><br></div><div><br></div><br><div><div><br><br></div></div></div>